Voglio sapere a riguardo di…

Federal Register / Vol. 86, No. 58 / Monday, March 29, 2021 / Rules and Regulations b. Automotive industry;
c. Machine tool industry;
d. Medical applications.
Note 3: 1A002.b.1 does not apply to semifinished items containing a maximum of two dimensions of interwoven filaments and specially designed for applications as follows:
a. Metal heat-treatment furnaces for tempering metals;
b. Silicon boule production equipment.
Note 4: 1A002 does not apply to finished items specially designed for a specific application.
Note 5: 1A002.b.1 does not apply to mechanically chopped, milled, or cut carbon fibrous or filamentary materials 25.0 mm or less in length.

17. In supplement no. 1 to part 774
the CCL, Category 1, ECCN 1A005 is revised to read as follow:

1A005 Body armor and specially designed components therefor, as follows see List of Items Controlled.

18. In supplement no. 1 to part 774
the CCL, Category 1, ECCN 1A006 is revised to read as follow:

License Requirements Reason for Control: NS, UN, AT
Controls NS applies to entire entry.
UN applies to entire entry.
AT applies to entire entry.

Country Chart See Supp. No. 1 to part 738
NS Column 2
See 746.1b for UN
controls AT Column 1

License Requirements Notes: 1. Soft body armor not manufactured to military standards or specifications must provide ballistic protection equal to or less than NIJ
level III NIJ 0101.06, July 2008 to be controlled under 1A005.a. 2. For purposes of 1A005.a, military standards and specifications include, at a minimum, specifications for fragmentation protection.
List Based License Exceptions See Part 740
for a Description of All License Exceptions LVS: N/A
GBS: Yes, except UN
List of Items Controlled Related Controls: 1 Bulletproof and bullet resistant vests body armor providing NIJ
Type IV protection or greater are subject to the ITAR see 22 CFR 121.1 Category Xa. 2 Soft body armor and protective garments manufactured to military standards or specifications that provide protection equal to or less than NIJ level III
or equivalent standards are classified under ECCN 1A613.d.1. 3 Hard armor plates providing NIJ level III or equivalent standard ballistic protection are classified under ECCN 1A613.d.2. 4 Police helmets and shields are classified under ECCN
0A979. 5 Other personal protective equipment specially designed for military applications not controlled by the USML or elsewhere in the CCL is classified under ECCN 1A613.e. 6 For fibrous or
VerDate Sep<11>2014

18:05 Mar 26, 2021

Jkt 253001

filamentary materials used in the manufacture of body armor, see ECCN
1C010.
Related Definitions: N/A
Items:
a. Soft body armor not manufactured to military standards or specifications, or to their equivalents, and specially designed components therefor;
b. Hard body armor plates that provide ballistic protection less than NIJ level III NIJ
0101.06, July 2008 or equivalent standards.
Notes to ECCN 1A005:
1. This entry does not control body armor when accompanying its user for the users own personal protection.
2. This entry does not control body armor designed to provide frontal protection only from both fragment and blast from nonmilitary explosive devices.
3. This entry does not apply to body armor designed to provide protection only from knife, spike, needle or blunt trauma.

1A006 Equipment, specially designed or modified for the disposal of Improvised Explosive Devices IEDs, as follows see List of Items Controlled, and specially designed components and accessories therefor.
License Requirements Reason for Control: NS, AT
Controls NS applies to entire entry.
AT applies to entire entry.

Country Chart See Supp. No. 1 to part 738
NS Column 2
AT Column 1

License Requirement Note: 1A006 does not apply to equipment when accompanying its operator.
List Based License Exceptions See Part 740
for a Description of All License Exceptions LVS: N/A
GBS: N/A
List of Items Controlled Related Controls: Equipment specially designed for military use for the disposal of IEDs is subject to the ITAR see 22
CFR parts 120 through 130, including USML Category IV.
Related Definitions: N/A
Items:
a. Remotely operated vehicles;
b. Disruptors.
Technical Note: For the purpose of 1A006.b disruptors are devices specially designed for the purpose of preventing the operation of an explosive device by projecting a liquid, solid or frangible projectile.
Note: 1A006 does not apply to equipment when accompanying its operator.

PO 00000

Frm 00011

Fmt 4701

Sfmt 4700

16491

19. In supplement no. 1 to part 774
the CCL, Category 1, ECCN 1A613 is revised to read as follow:

1A613 Armored and protective equipment and related commodities, as follows see List of Items Controlled.
License Requirements Reason for Control: NS, RS, AT, UN
Controls NS applies to entire entry except 1A613.y.
RS applies to entire entry except 1A613.y.
RS applies 1A613.y ..
AT applies to entire entry.
UN applies to entire entry, except 1A613.y.

Country Chart See Supp. No. 1 to part 738
NS Column 1
RS Column 1
China, Russia, or Venezuela see 742.6a7
AT Column 1
See 746.1b for UN
controls
List Based License Exceptions See Part 740
for a Description of All License Exceptions LVS: $1500
GBS: N/A
Special Conditions for STA
STA: Paragraph c2 of License Exception STA 740.20c2 of the EAR may not be used for any item in 1A613.
List of Items Controlled Related Controls: 1 Defense articles, such as materials made from classified information, that are controlled by USML
Category X or XIII of the ITAR, and technical data including software directly related thereto, are subject to the ITAR.
2 See ECCN 0A919 for foreign-made military commodities that incorporate more than a de minimis amount of USorigin 600 series controlled content. 3
See ECCN 9A610.g for anti-gravity suits G-suits and pressure suits capable of operating at altitudes higher than 55,000
feet above sea level.
Related Definitions: References to NIJ Type protection are to the National Institute of Justice Classification guide at NIJ Standard 0101.06, Ballistic Resistance of Body Armor, and NIJ Standard 0108.01, Ballistic Resistant Protective Materials.
Items:
a. Metallic or non-metallic armored plate specially designed for military use and not controlled by the USML.
Note to paragraph a: For controls on body armor plates, see ECCN 1A613.d.2 and USML Category Xa1.
b. Shelters specially designed to:
b.1. Provide ballistic protection for military systems; or b.2. Protect against nuclear, biological, or chemical contamination.
c. Military helmets other than helmets controlled under 1A613.y.1 providing less than NIJ Type IV or equivalent standards
E:FRFM29MRR3.SGM

29MRR3