Voglio sapere a riguardo di…

16492

Federal Register / Vol. 86, No. 58 / Monday, March 29, 2021 / Rules and Regulations
protection and specially designed helmet shells, liners, or comfort pads therefor.
Note 1: See ECCN 0A979 for controls on police helmets.
Note 2: See USML Category Xa5 and a6 for controls on other military helmets.
d. Body armor and protective garments, as follows:
d.1. Soft body armor and protective garments manufactured to military standards or specifications, or to their equivalents, that provide ballistic protection equal to or less than NIJ level III NIJ 0101.06, July 2008 or equivalent standards; or Note: For 1A613.d.1, military standards or specifications include, at a minimum, specifications for fragmentation protection.
d.2. Hard body armor plates that provide ballistic protection equal to NIJ level III NIJ
0101.06, July 2008 or equivalent standards.
Note: See ECCN 1A005 for controls on soft body armor not manufactured to military standards or specifications and hard body armor plates providing less than NIJ level III
or equivalent standards protection. For body armor providing NIJ Type IV protection or greater, see USML Category Xa1.
e. Atmospheric diving suits specially designed for rescue operations for submarines controlled by the USML or the CCL.
f. Other personal protective equipment specially designed for military applications not controlled by the USML, not elsewhere controlled on the CCL.
g. to w. Reserved x. Parts, components, accessories, and attachments that are specially designed for a commodity controlled by ECCN 1A613 except for 1A613.y or an article enumerated in USML Category X, and not controlled elsewhere in the USML.
Note: Forgings, castings, and other unfinished products, such as extrusions and machined bodies, that have reached a stage in manufacturing where they are clearly identifiable by mechanical properties, material composition, geometry, or function as commodities controlled by ECCN 1A613.x are controlled by ECCN 1A613.x.
y. Other commodities as follows:
y.1 Conventional military steel helmets.
N.B. to paragraph y.1: For other military helmet components or accessories, see the relevant ECCN in the CCL or USML Entry.
y.2 Reserved
20. In supplement no. 1 to part 774
the CCL, Category 1, ECCN 1B002 is revised to read as follow:

1B002 Equipment designed to produce metal alloy powder or particulate materials and having any of the following see List of Items Controlled.
License Requirements Reason for Control: NS, AT

VerDate Sep<11>2014

18:05 Mar 26, 2021

Jkt 253001

Controls NS applies to entire entry.
AT applies to entire entry.

Country Chart See Supp. No. 1 to part 738
NS Column 2
AT Column 1

List Based License Exceptions See Part 740
for a Description of All License Exceptions LVS: $5000
GBS: N/A
List of Items Controlled Related Controls: N/A
Related Definitions: N/A
Items:
a. Specially designed to avoid contamination; and b. Specially designed for use in one of the processes specified by 1C002.c.2.

21. In supplement no. 1 to part 774
the CCL, Category 1, ECCN 1C001 is revised to read as follow:

1C001 Materials specially designed for absorbing electromagnetic radiation, or intrinsically conductive polymers, as follows see List of Items Controlled.
License Requirements Reason for Control: NS, MT, AT
Controls NS applies to entire entry.
MT applies to items that meet or exceed the parameters of ECCN
1C101.
AT applies to entire entry.

Country Chart See Supp. No. 1 to part 738
NS Column 1
MT Column 1

AT Column 1

Reporting Requirements See 743.1 of the EAR for reporting requirements for exports under License Exceptions, and Validated End-User authorizations.
List Based License Exceptions See Part 740
for a Description of All License Exceptions LVS: N/A
GBS: N/A
Special Conditions for STA
STA: License Exception STA may not be used to ship any item in this entry to any of the destinations listed in Country Group A:6 See Supplement No.1 to part 740 of the EAR.
List of Items Controlled Related Controls: See also 1C101
Related Definitions: N/A
Items:
a. Materials for absorbing frequencies exceeding 2 x 108 Hz but less than 3 x 1012
Hz.
Note 1: 1C001.a does not control:
a. Hair type absorbers, constructed of natural or synthetic fibers, with non-magnetic loading to provide absorption;

PO 00000

Frm 00012

Fmt 4701

Sfmt 4700

b. Absorbers having no magnetic loss and whose incident surface is non-planar in shape, including pyramids, cones, wedges and convoluted surfaces;
c. Planar absorbers, having all of the following:
1. Made from any of the following:
a. Plastic foam materials flexible or nonflexible with carbon-loading, or organic materials, including binders, providing more than 5% echo compared with metal over a bandwidth exceeding 15% of the center frequency of the incident energy, and not capable of withstanding temperatures exceeding 450 K 177 C; or b. Ceramic materials providing more than 20% echo compared with metal over a bandwidth exceeding 15% of the center frequency of the incident energy, and not capable of withstanding temperatures exceeding 800 K 527 C;
Technical Note: Absorption test samples for 1C001.a. Note 1.c.1 should be a square at least 5 wavelengths of the center frequency on a side and positioned in the far field of the radiating element.
2. Tensile strength less than 7 x 106 N/m2;
and 3. Compressive strength less than 14 x 106
N/m2;
d. Planar absorbers made of sintered ferrite, having all of the following:
1. A specific gravity exceeding 4.4; and 2. A maximum operating temperature of 548 K 275 C or less;
e. Planar absorbers having no magnetic loss and fabricated from open-cell foams plastic material with a density of 0.15 grams/
cm3 or less.
Technical Note: Open-cell foams are flexible and porous materials, having an inner structure open to the atmosphere.
Open-cell foams are also known as reticulated foams.
Note 2: Nothing in Note 1 releases magnetic materials to provide absorption when contained in paint.
b. Materials not transparent to visible light and specially designed for absorbing nearinfrared radiation having a wavelength exceeding 810 nm but less than 2,000 nm frequencies exceeding 150 THz but less than 370 THz;
Note: 1C001.b does not apply to materials, specially designed or formulated for any of the following applications:
a. Laser marking of polymers; or b. Laser welding of polymers.
c. Intrinsically conductive polymeric materials with a bulk electrical conductivity exceeding 10,000 S/m Siemens per meter or a sheet surface resistivity of less than 100
ohms/square, based on any of the following polymers:
c.1. Polyaniline;
c.2. Polypyrrole;
c.3. Polythiophene;
c.4. Poly phenylene-vinylene; or c.5. Poly thienylene-vinylene.
Note: 1C001.c does not apply to materials in a liquid form.
Technical Note: Bulk electrical conductivity and sheet surface resistivity
E:FRFM29MRR3.SGM

29MRR3