Quiero saber acerca de...

THE CITY RECORD

240

regulations in M1-6D Districts;

3 M1-5M and M1-6M Districts, as set forth in Section 42-33
Use regulations in M1-5M and M1-6M Districts;
4 M1-1, M1-5 and M1-6 Districts in certain areas, as set forth in Section 42-34 Use regulations in certain M1-1, M1-5 and M1-6 Districts; and 5 M1-5B Districts, as set forth in Section 42-35 Use regulations in M1-5B Districts. ; and 6 Manufacturing Districts with an A suffix, as set forth in Section 42-36 Use regulations in A suffix districts.

42-36
Use Regulations in Manufacturing Districts with an A Suffix 42-361
General use modifications In M1 and M2 Districts with an A suffix, the applicable use regulations shall be modified as follows:
a In M1 Districts with an A suffix:
1 all retail and service uses listed in Use Group 6 shall be permitted, and no associated size limitations shall apply;

M1-6
MOVING EXISTING TEXT TO SECTION 43-14
In the district indicated, except for M1-6D Districts, for each square foot of public plaza provided on a zoning lot, in accordance with the provisions of Section 37-70, inclusive, the total floor area permitted on that zoning lot under the provisions of Section 43-12
Maximum Floor Area Ratio may be increased by six square feet.
NEW PROVISIONS, PER PROPOSAL
43-131
Definitions Definitions specifically applicable to this Chapter are set forth in this Section. The definitions of other defined terms are set forth in Section 12-10 DEFINITIONS, except where explicitly stated otherwise in individual provisions in this Chapter.
Qualifying uses Qualifying uses shall include certain commercial and manufacturing uses eligible for higher permitted floor area ratio in M2 and M3 Districts with an A suffix.
In M2 Districts with an A suffix such uses shall include referenced commercial and manufacturing uses.
In M3 Districts with an A suffix, such uses shall include qualifying uses in M2 Districts with an A suffix, as well as the following;
From Use Group 4B and 4C

2 all recreation, entertainment and assembly space uses listed in Use Group 8 shall be permitted;

utility infrastructure uses
3 all community facility uses without sleeping accommodations listed in Use Group 3B shall be permitted.

renewable energy and green infrastructure uses
b In M2 Districts with an A suffix, the use regulations for an M1
District with an A suffix shall apply, inclusive of performance standards, supplementary use regulations, and sign regulations.

ARTICLE IV
MANUFACTURING DISTRICT REGULATIONS
Chapter 3
Bulk Regulations 43-00
APPLICABILITY AND GENERAL PROVISIONS

43-10
FLOOR AREA REGULATIONS

43-12
Maximum Floor Area Ratio M1 M2 M3
In all districts, as indicated, for any zoning lot, the maximum floor area ratio shall not exceed the floor area ratio set forth in the following table, except as otherwise provided in the following Sections:
Section 43-121

Expansion of existing manufacturing buildings
Section 43-122

Maximum floor area ratio for community facilities
Section 43-13

Floor Area Bonus for Public Plazas Floor Area in Manufacturing Districts With an A Suffix
Section 43-14

Floor Area Bonus for Public Plazas and Arcades
Section 43-15

Existing Public Amenities for which Floor Area Bonuses Have Been Received
Section 43-16

Special Provisions for Zoning Lots Divided by District Boundaries
Section 43-61
Section 43-62

TUESDAY, JANUARY 16, 2024

From Use Group 9
all uses, other than self-service storage facilities.
43-132
Floor area regulations in M1 Districts with an A suffix In M1 Districts with an A suffix, the maximum floor area ratio for all permitted uses shall be as set forth in the following table.
Districts
Maximum Permitted Floor Area Ratio
M1-1A

2.00

M1-2A

3.00

M1-3A

4.00

M1-4A

5.00

M1-5A

6.50

M1-6A

8.00

M1-7A

10.00

M1-8A

12.00

M1-9A

15.00

43-132
Floor area regulations in M2 or M3 Districts with an A suffix In M2 and M3 Districts with an A suffix, the maximum floor area ratio for qualifying uses, and for all other all permitted uses shall be as set forth in the respective columns of the following tables.
Districts
Maximum Permitted Floor Area Ratio for qualifying uses
Maximum Permitted Floor Area Ratio for other uses
Bulk Regulations for Residential Uses in M1-1D
Through M1-5D Districts
M2-1A

2.00

1.50

M2-2A

3.00

2.50

Bulk Regulations in M1-6D Districts
M2-3A

4.00

3.25

M2-4A

5.00

4.25

M3-1A

2.00

1.00

M3-2A

3.00

1.00

43-13
Floor Area Bonus for Public Plazas Floor Area in Manufacturing Districts With an A Suffix