Je veux savoir à propos de…

Federal Register / Vol. 86, No. 171 / Wednesday, September 8, 2021 / Rules and Regulations caused by the closing of the Standish Industrial Airport and associated instrument procedures are no longer required.
DATES: Effective 0901 UTC, December 2, 2021. The Director of the Federal Register approves this incorporation by reference action under 1 CFR part 51, subject to the annual revision of FAA
Order 7400.11 and publication of conforming amendments.
ADDRESSES: FAA Order 7400.11E, Airspace Designations and Reporting Points, and subsequent amendments can be viewed online at https
www.faa.gov/air_traffic/publications/.
For further information, you can contact the Airspace Policy Group, Federal Aviation Administration, 800
Independence Avenue SW, Washington, DC 20591; telephone: 202 2678783.
The Order is also available for inspection at the National Archives and Records Administration NARA. For information on the availability of FAA
Order 7400.11E at NARA, email fr.inspection@nara.gov or go to https
www.archives.gov/federal-register/cfr/
ibr-locations.html.
FOR FURTHER INFORMATION CONTACT:
Rebecca Shelby, Federal Aviation Administration, Operations Support Group, Central Service Center, 10101
Hillwood Parkway, Fort Worth, TX
76177; telephone 817 2225857.
SUPPLEMENTARY INFORMATION:

jbell on DSKJLSW7X2PROD with RULES

Authority for This Rulemaking The FAAs authority to issue rules regarding aviation safety is found in Title 49 of the United States Code.
Subtitle I, Section 106 describes the authority of the FAA Administrator.
Subtitle VII, Aviation Programs, describes in more detail the scope of the agencys authority. This rulemaking is promulgated under the authority described in Subtitle VII, Part A, Subpart I, Section 40103. Under that section, the FAA is charged with prescribing regulations to assign the use of airspace necessary to ensure the safety of aircraft and the efficient use of airspace. This regulation is within the scope of that authority as it revokes the Class E airspace extending upward from 700 feet above the surface at Standish Industrial Airport, Standish, MI, due to the closure of the airport and cancellation of the instrument procedures at this airport.
History The FAA published a notice of proposed rulemaking in the Federal Register 86 FR 24792; May 10, 2021
for Docket No. FAA20210277 to revoke Class E airspace extending
VerDate Sep<11>2014

16:25 Sep 07, 2021

Jkt 253001

upward from 700 feet above the surface at Standish Industrial Airport, Standish, MI. Interested parties were invited to participate in this rulemaking effort by submitting written comments on the proposal to the FAA. No comments were received.
Class E airspace designations are published in paragraph 6005 of FAA
Order 7400.11E, dated July 21, 2020, and effective September 15, 2020, which is incorporated by reference in 14 CFR
71.1. The Class E airspace designations listed in this document will be published subsequently in the Order.
Availability and Summary of Documents for Incorporation by Reference This document amends FAA Order 7400.11E, Airspace Designations and Reporting Points, dated July 21, 2020, and effective September 15, 2020. FAA
Order 7400.11E is publicly available as listed in the ADDRESSES section of this document. FAA Order 7400.11E lists Class A, B, C, D, and E airspace areas, air traffic service routes, and reporting points.
The Rule This amendment to 14 CFR part 71
revokes the Class E airspace extending upward from 700 feet above the surface at Standish Industrial Airport, Standish, MI.
This action is the result of an airspace review due to the closing of the Standish Industrial Airport, Standish, MI, and cancellation of the instrument procedures at this airport.
FAA Order 7400.11, Airspace Designations and Reporting Points, is published yearly and effective on September 15.
Regulatory Notices and Analyses The FAA has determined that this regulation only involves an established body of technical regulations for which frequent and routine amendments are necessary to keep them operationally current, is non-controversial and unlikely to result in adverse or negative comments. It, therefore: 1 Is not a significant regulatory action under Executive Order 12866; 2 is not a significant rule under DOT
Regulatory Policies and Procedures 44
FR 11034; February 26, 1979; and 3
does not warrant preparation of a regulatory evaluation as the anticipated impact is so minimal. Since this is a routine matter that only affects air traffic procedures and air navigation, it is certified that this rule, when promulgated, does not have a significant economic impact on a substantial
PO 00000

Frm 00037

Fmt 4700

Sfmt 9990

50249

number of small entities under the criteria of the Regulatory Flexibility Act.
Environmental Review The FAA has determined that this action qualifies for categorical exclusion under the National Environmental Policy Act in accordance with FAA
Order 1050.1F, Environmental Impacts: Policies and Procedures, paragraph 56.5.a. This airspace action is not expected to cause any potentially significant environmental impacts, and no extraordinary circumstances exist that warrant preparation of an environmental assessment.
Lists of Subjects in 14 CFR Part 71
Airspace, Incorporation by reference, Navigation air.
Adoption of the Amendment In consideration of the foregoing, the Federal Aviation Administration amends 14 CFR part 71 as follows:
PART 71DESIGNATION OF CLASS A, B, C, D, AND E AIRSPACE AREAS; AIR
TRAFFIC SERVICE ROUTES; AND
REPORTING POINTS
1. The authority citation for part 71
continues to read as follows:

Authority: 49 U.S.C. 106f, 106g; 40103, 40113, 40120; E.O. 10854, 24 FR 9565, 3 CFR, 19591963 Comp., p. 389.
71.1

Amended
2. The incorporation by reference in 14 CFR 71.1 of FAA Order 7400.11E, Airspace Designations and Reporting Points, dated July 21, 2020, and effective September 15, 2020, is amended as follows:

Paragraph 6005 Class E Airspace Areas Extending Upward From 700 Feet or More Above the Surface of the Earth.

AGL MI E5

Standish, MI Removed
Issued in Fort Worth, Texas, on September 1, 2021.
Martin A. Skinner, Manager, Operations Support Group, ATO
Central Service Center.
FR Doc. 202119276 Filed 9721; 8:45 am BILLING CODE 491013P

E:FRFM08SER1.SGM

08SER1