Je veux savoir à propos de…

Federal Register / Vol. 86, No. 29 / Tuesday, February 16, 2021 / Notices subsidized imports of millwork products from China.3 In accordance with section 705c2 of the Act, Commerce is issuing this countervailing duty order.
Therefore, in accordance with section 706a of the Act, Commerce will direct U.S. Customs and Border Protection CBP to assess, upon further instruction by Commerce, countervailing duties on unliquidated entries of millwork products from China entered, or withdrawn from warehouse, for consumption on or after June 12, 2020, the date on which Commerce published its preliminary countervailing duty determination in the Federal Register,4
and before October 10, 2020, the effective date on which Commerce instructed CBP to discontinue the suspension of liquidation, in accordance with section 703d of the Act. Section 703d of the Act states that the suspension of liquidation pursuant to an affirmative preliminary determination may not remain in effect for more than four months. Therefore, entries of millwork products from China made on or after October 10, 2020, and prior to the date of publication of the ITCs final determination in the Federal Register, are not subject to the assessment of countervailing duties due to Commerces discontinuation of the suspension of liquidation.

khammond on DSKJM1Z7X2PROD with NOTICES

Suspension of Liquidation In accordance with section 706 of the Act, Commerce will direct CBP to reinstitute the suspension of liquidation of millwork products from China, effective the date of publication of the ITCs notice of final determination in the Federal Register, and to assess, upon further instruction by Commerce pursuant to section 706a1 of the Act, countervailing duties for each entry of the subject merchandise in an amount based on the net countervailable subsidy rates for the subject merchandise. On or after the date of publication of the ITCs final injury determination in the Federal Register, CBP must require, at the same time as importers would deposit estimated normal customs duties on this merchandise, a cash deposit equal to the subsidy rates noted below. These instructions suspending liquidation will remain in effect until further notice. The 3 Id.
4 See Wood Mouldings and Millwork Products from the Peoples Republic of China: Preliminary Affirmative Countervailing Duty Determination and Alignment of Final Determination with Final Antidumping Duty Determination, 85 FR 35900
June 12, 2020 Preliminary Determination.

VerDate Sep<11>2014

17:04 Feb 12, 2021

Jkt 253001

all-others rate applies to all producers or exporters not specifically listed below.
Subsidy rate percent
Company Fujian Yinfeng Imp & Exp Trading Co., Ltd 5
Fujian Nanping Yuanqiao Wood Industry Co., Ltd
All Others

20.56
252.29
20.56

Provisional Measures Section 703d of the Act states that the suspension of liquidation pursuant to an affirmative preliminary determination may not remain in effect for more than four months. In the underlying investigation, Commerce published the Preliminary Determination on June 12, 2020.6
Therefore, entries of millwork products from China made on or after October 10, 2020, and prior to the date of publication of the ITCs final determination in the Federal Register, are not subject to the assessment of countervailing duties due to Commerces discontinuation of the suspension of liquidation.
In accordance with section 703d of the Act, Commerce instructed CBP to terminate the suspension of liquidation and to liquidate, without regard to countervailing duties, unliquidated entries of millwork products from China entered, or withdrawn from warehouse, for consumption on or after October 10, 2020, the date on which the provisional countervailing duty measures expired, through the day preceding the date of publication of the ITC final injury determination in the Federal Register.
Suspension of liquidation will resume on the date of publication of the ITC
final injury determination in the Federal Register.
Notifications to Interested Parties This notice constitutes the countervailing duty order with respect to millwork products from China pursuant to section 706a of the Act.
Interested parties can find a list of countervailing duty orders currently in effect at http enforcement.trade.gov/
stats/iastats1.html.
5 As discussed in the Preliminary Determination, Commerce found that Fujian Province Youxi City Mangrove Wood Machining Co., Ltd.; Fujian Province Youxi City Mangrove Wood Machining Co., Ltd.; and Xicheng Branch are cross-owned affiliates of mandatory respondent Fujian Yinfeng Imp & Exp Trading Co., Ltd. See Preliminary Determination, 85 FR at 35901, unchanged in the Final Determination.
6 See Preliminary Determination.

PO 00000

Frm 00009

Fmt 4703

Sfmt 4703

9485

This order is issued and published in accordance with section 706a of the Act and 19 CFR 351.211b.
Dated: February 10, 2021.
Christian Marsh, Acting Assistant Secretary for Enforcement and Compliance.

Appendix Scope of the Order The merchandise subject to this order consists of wood mouldings and millwork products that are made of wood regardless of wood species, bamboo, laminated veneer lumber LVL, or of wood and composite materials where the composite materials make up less than 50 percent of the total merchandise, and which are continuously shaped wood or finger-jointed or edge-glued moulding or millwork blanks whether or not resawn. The merchandise subject to this order can be continuously shaped along any of its edges, ends, or faces.
The percentage of composite materials contained in a wood moulding or millwork product is measured by length, except when the composite material is a coating or cladding. Wood mouldings and millwork products that are coated or clad, even along their entire length, with a composite material, but that are otherwise comprised of wood, LVL, or wood and composite materials where the non-coating composite materials make up 50 percent or less of the total merchandise are covered by the scope.
The merchandise subject to this order consists of wood, LVL, bamboo, or a combination of wood and composite materials that is continuously shaped throughout its length with the exception of any endwork/dados, profiled wood having a repetitive design in relief, similar milled wood architectural accessories, such as rosettes and plinth blocks, and finger-jointed or edge-glued moulding or millwork blanks whether or not resawn. The scope includes continuously shaped wood in the forms of dowels, building components such as interior paneling and jamb parts, and door components such as rails, stiles, interior and exterior door frames or jambs including split, flat, stop applied, singleor doublerabbeted, frame or jamb kits, and packaged door frame trim or casing sets, whether or not the door components are imported as part of a door kit or set.
The covered products may be solid wood, laminated, finger-jointed, edge-glued, faceglued, or otherwise joined in the production or remanufacturing process and are covered by the scope whether imported raw, coated e.g., gesso, polymer, or plastic, primed, painted, stained, wrapped paper or vinyl overlay, any combination of the aforementioned surface coatings, treated, or which incorporate rot-resistant elements whether wood or composite. The covered products are covered by the scope whether or not any surface coatings or covers obscure the grain, textures, or markings of the wood, whether or not they are ready for use or require final machining e.g., endwork/dado, hinge/strike machining, weatherstrip or application thereof, mitre or packaging.

E:FRFM16FEN1.SGM

16FEN1