Je veux savoir à propos de…

9830

Federal Register / Vol. 86, No. 29 / Tuesday, February 16, 2021 / Proposed Rules
BILLING CODE 451026C

Appendix D to 1910.1200Safety Data Sheets Mandatory A safety data sheet SDS shall include the information specified in Table D.1 under the
section number and heading indicated for sections 111 and 16. While each section of the SDS must contain all of the specified information, preparers of safety data sheets are not required to present the information in any particular order within each section. If
no relevant information is found for any given subheading within a section, the SDS
shall clearly indicate that no applicable information is available. Sections 1215 may be included in the SDS, but are not mandatory.

TABLE D.1MINIMUM INFORMATION FOR AN SDS
Heading
Subheading
1. Identification

a Product identifier used on the label;
b Other means of identification;
c Recommended use of the chemical and restrictions on use;
d Name, U.S. address, and U.S. telephone number of the chemical manufacturer, importer, or other responsible party;
e Emergency phone number.
a Classification of the chemical in accordance with paragraph d of 1910.1200, including any hazards associated with a change in the chemicals physical form under normal conditions of use;
b Signal word, hazard statements, symbols and precautionary statements in accordance with paragraph f of 1910.1200. Hazard symbols may be provided as graphical reproductions in black and white or the name of the symbol, e.g., flame, skull and crossbones;
c Hazards identified under normal conditions of use that result from a chemical reaction changing the chemical structure of the original substance or mixture;
d Describe any hazards not otherwise classified that have been identified during the classification process;
e Where an ingredient with unknown acute toxicity is used in a mixture at a concentration 1% and the mixture is not classified based on testing of the mixture as a whole, a statement that X% of the mixture consists of ingredients of unknown acute toxicity is required.
Except as provided for in paragraph i of 1910.1200 on trade secrets:
For Substances a Chemical name;
b Common name and synonyms;
c CAS number and other unique identifiers;
d Impurities and stabilizing additives constituents which are themselves classified and which contribute to the classification of the substance.
For Mixtures In addition to the information required for substances:
a The chemical name, CAS number or other unique identifier, and concentration exact percentage or concentration ranges of all ingredients which are classified as health hazards in accordance with paragraph d of 1910.1200 and 1 are present above their cut-off/concentration limits; or 2 present a health risk below the cut-off/concentration limits.
b The concentration exact percentage shall be specified unless a trade secret claim is made in accordance with paragraph i of 1910.1200, when there is batch-to-batch variability in the production of a mixture, or for a group of substantially similar mixtures See A.0.5.1.2 with similar chemical composition.
In these cases, concentration ranges may be used.
For All Chemicals Where a Trade Secret is Claimed Where a trade secret is claimed in accordance with paragraph i of 1910.1200, a statement that the specific chemical identity, exact percentage concentration, or concentration range of composition has been withheld as a trade secret is required. When the concentration or concentration range is withheld as a trade secret, the chemical composition must be provided in accordance with the prescribed concentration ranges in 1910.1200i1iv.
a Description of necessary measures, subdivided according to the different routes of exposure, i.e., inhalation, skin and eye contact, and ingestion;
b Most important symptoms/effects, acute and delayed.
c Indication of immediate medical attention and special treatment needed, if necessary.
a Suitable and unsuitable extinguishing media.
b Specific hazards arising from the chemical e.g., nature of any hazardous combustion products.
c Special protective equipment and precautions for fire-fighters.
a Personal precautions, protective equipment, and emergency procedures.
b Methods and materials for containment and cleaning up.
a Precautions for safe handling.
b Conditions for safe storage, including any incompatibilities.
a For all ingredients or constituents listed in Section 3, the OSHA permissible exposure limit PEL, American Conference of Governmental Industrial Hygienists ACGIH Threshold Limit Value TLV, and any other exposure limit or range used or recommended by the chemical manufacturer, importer, or employer preparing the safety data sheet, where available.
b Appropriate engineering controls.
c Individual protection measures, such as personal protective equipment.
a Physical state.
b Color.
c Odor.
d Melting point/freezing point.
e Boiling point or initial boiling point or boiling range.
f Flammability.

2. Hazards identification

3. Composition/information on ingredients.

4. First-aid measures

5. Fire-fighting measures
6. Accidental release measures

khammond on DSKJM1Z7X2PROD with PROPOSALS2

7. Handling and storage
8. Exposure controls/personal protection.

9. Physical and chemical properties
VerDate Sep<11>2014

19:00 Feb 12, 2021

Jkt 253001

PO 00000

Frm 00256

Fmt 4701

Sfmt 4702

E:FRFM16FEP2.SGM

16FEP2