Je veux savoir à propos de…

Federal Register / Vol. 86, No. 1 / Monday, January 4, 2021 / Rules and Regulations 2 IEC 600341:2010, Rotating electric machinesPart 1: Rating and performance.
3 IEC 600511:2016, Direct acting indicating analogue electrical measuring instruments and their accessoriesPart 1: Definitions and general requirements common to all parts.
4 IEEE 1122017, IEEE Standard Test Procedure for Polyphase Induction Motors and Generators.
5 NEMA MG 12016, Motors and Generators.
Copies of these standards can be obtained from the organizations directly at the following addresses:
IEC, 3 rue de Varembe, 1st Floor, P.O. Box 131, CH1211 Geneva 20
Switzerland, +41 22 919 02 11, or by visiting https webstore.iec.ch/home.
IEEE, 445 Hoes Lane, P.O. Box 1331, Piscataway, NJ 088551331, 732
9810060, or by visiting http
www.ieee.org.
NEMA, 1300 North 17th Street, Suite 900, Arlington, Virginia 22209, +1
703 841 3200, or by visiting https
www.nema.org.
IV. Approval of the Office of the Secretary The Secretary of Energy has approved publication of this final rule.
List of Subjects in 10 CFR Part 431
Administrative practice and procedure, Confidential business information, Energy conservation test procedures, Incorporation by reference, and Reporting and recordkeeping requirements.
Signing Authority This document of the Department of Energy was signed on December 11, 2020, by Daniel R Simmons, Assistant Secretary for Energy Efficiency and Renewable Energy, pursuant to delegated authority from the Secretary of Energy. That document with the original signature and date is maintained by DOE. For administrative purposes only, and in compliance with requirements of the Office of the Federal Register, the undersigned DOE Federal Register Liaison Officer has been authorized to sign and submit the document in electronic format for publication, as an official document of the Department of Energy. This administrative process in no way alters the legal effect of this document upon publication in the Federal Register.

VerDate Sep<11>2014

16:17 Dec 31, 2020

Jkt 253001

Signed in Washington, DC, on December 11, 2020.
Treena V. Garrett, Federal Register Liaison Officer, U.S.
Department of Energy.

For the reasons stated in the preamble, DOE is amending part 431 of Chapter II of Title 10, Code of Federal Regulations as set forth as follows:
PART 431ENERGY EFFICIENCY
PROGRAM FOR CERTAIN
COMMERCIAL AND INDUSTRIAL
EQUIPMENT
1. The authority citation for part 431
continues to read as follows:

Authority: 42 U.S.C. 62916317; 28 U.S.C.
2461 note.

2. Section 431.12 is amended by revising the definition of Accreditation to read as follows:

431.12

Definitions.

Accreditation means recognition by an accreditation body that a laboratory is competent to test the efficiency of electric motors according to the scope and procedures given in IEEE 1122017
Test Method B, CSA C39010, or IEC
6003421:2014 Method 211B
incorporated by reference, see 431.15.

3. Section 431.15 is amended by:
a. Throughout this section, removing the words subpart B of part 431 and adding, in their place, this subpart b. Revising paragraph a;
c. Redesignating paragraph c4 as paragraph c7 and paragraphs c2
and 3 as paragraphs c4 and 5, respectively;
d. Adding new paragraphs c2, 3, and 6; and e. Revising paragraph d1.
The additions and revisions read as follows:
431.15 Materials incorporated by reference.

a General. Certain material is incorporated by reference into this subpart with the approval of the Director of the Federal Register under 5
U.S.C. 552a and 1 CFR part 51. To enforce any edition other than that specified in this section, the Department of Energy must publish a document in the Federal Register and the material must be available to the public.
Standards can be obtained from the sources below. All approved material is available for inspection at U.S.
Department of Energy, Office of Energy Efficiency and Renewable Energy, Building Technologies Program, Sixth
PO 00000

Frm 00021

Fmt 4700

Sfmt 4700

21

Floor, 950 LEnfant Plaza SW, Washington, DC 20024, 202 5862945, or go to http www1.eere.energy.gov/
buildings/appliance_standards/. It is also available at the National Archives and Records Administration NARA.
For information on the availability of this material at NARA, email:
fedreg.legal@nara.gov, or go to:
www.archives.gov/federal-register/cfr/
ibr-locations.html.

c
2 IEC 600341, Edition 12.0 2010
02, IEC 600341:2010, Rotating Electrical MachinesPart 1: Rating and Performance, IBR approved for appendix B to this subpart.
3 IEC 6003421:2014, Edition 2.0
201406, IEC 6003421:2014, Rotating electrical machinesPart 21:
Standard methods for determining losses and efficiency from tests excluding machines for traction vehicles, IBR approved for 431.12;
431.19; 431.20; appendix B to this subpart.

6 IEC 600511:2016, Edition 6.0
201602, IEC 600511:2016, Direct acting indicating analogue electrical measuring instruments and their accessoriesPart 1: Definitions and general requirements common to all parts, IBR approved for appendix B to this subpart.

d
1 IEEE 112TM2017 IEEE 112
2017, IEEE Standard Test Procedure for Polyphase Induction Motors and Generators, approved December 6, 2017, IBR approved for 431.12; 431.19;
431.20; appendix B to this subpart.

4. Section 431.19 is amended by revising paragraphs b4 and c4 to read as follows:
431.19 Department of Energy recognition of accreditation bodies.

b
4 It must be expert in the content and application of the test procedures and methodologies in IEEE 1122017
Test Method B, CSA C39010, or IEC
6003421:2014 Method 211B, incorporated by reference, see 431.15.
c
4 Expertise in electric motor test procedures. The petition should set forth the organizations experience with the test procedures and methodologies in IEEE 1122017 Test Method B, CSA
C39010, or IEC 6003421:2014
Method 211B, incorporated by
E:FRFM04JAR1.SGM

04JAR1