Federal Register - December 22, 2021
Versione di testo Cosa è?Dateas è un sito indipendente non affiliato a entità governative. La fonte dei documenti PDF che pubblichiamo qui è l'entità governativa indicata in ciascuno di essi. Le versioni in testo sono trascrizioni che realizziamo per facilitare l'accesso e la ricerca di informazioni, ma possono contenere errori o non essere complete.
Source: Federal Register
Federal Register / Vol. 86, No. 243 / Wednesday, December 22, 2021 / Proposed Rules 2 AHAM DW22020: Household Electric Dishwashers i Section 5.10 as referenced in sections 2
and 2.8 of this appendix;
ii Sections 5.10.1 as referenced in sections 4 and 4.2 of this appendix; and iii Section 5.12.3.2 as referenced in sections 5 and 5.1 of this appendix.
3 IEC 62301: Household Electrical AppliancesMeasurement of Standby Power i Sections 4.2, 4.3.2, and 5.2 as referenced in section 2 of this appendix; and ii Sections 5.1, note 1, and 5.3.2 as referenced in section 4 of this appendix.
1. Definitions The definitions in Section 1.1 through 1.30
of AHAM DW12020 apply to this test procedure, including the applicable provisions of AHAM DW22020 as referenced in Sections 1.5, 1.18, 1.19. 1.20, and 1.22 of AHAM DW12020.
khammond on DSKJM1Z7X2PROD with PROPOSALS2
2. Testing Conditions The testing conditions in Sections 2.1
through 2.11 of AHAM DW12020, except Sections 2.6.1 and 2.6.2, and the testing conditions in Section 5.10 of AHAM DW2
2020 apply to this test procedure, including the following provisions of:
1 Sections 4.2, 4.3.2, and 5.2 of IEC 62301
as referenced in Sections 2.1, 2.2.4, and 2.5.2
of AHAM DW12020, respectively, and 2 Sections 5.3 through 5.8 of AHAM DW
22020 as referenced in Sections 2.6.3.1, 2.6.3.2, and 2.6.3.3; section 3.4 of AHAM
DW22020, excluding the accompanying Note, as referenced in Section 2.7.1 of AHAM
DW12020; Section 5.4 of AHAM DW2
2020 as referenced in Section 2.7.4 of AHAM
DW12020; Section 5.5 of AHAM DW2
2020 as referenced in Section 2.7.5 of AHAM
DW12020, and Section 4.1 of AHAM DW
22020 as referenced in Section 2.10.1 of AHAM DW12020. Additionally, the following requirements are also applicable.
2.1 Installation Requirements.
The installation requirements described in Section 2.1 of AHAM DW12020 are applicable to all dishwashers, with the following additions:
2.1.1 In-Sink Dishwashers.
For in-sink dishwashers, the requirements pertaining to the rectangular enclosure for under-counter or under-sink dishwashers are not applicable. For such dishwashers, the rectangular enclosure must consist of a front, a back, two sides, and a bottom. The front, back, and sides of the enclosure must be brought into the closest contact with the appliance that the configuration of the dishwasher will allow. The height of the enclosure shall be as specified in the manufacturers instructions for installation height. If no instructions are provided, the enclosure height shall be 36 inches. The dishwasher must be installed from the top and mounted to the edges of the enclosure.
2.1.2 Dishwashers without a Direct Water Line.
Manually fill the built-in water reservoir to the full capacity reported by the manufacturer, using water at a temperature in accordance with Section 2.3 of AHAM DW
12020.
2.2 Water pressure.
The water pressure requirements described in Section 2.4 of AHAM DW12020 are applicable to all dishwashers except
Dishware/glassware/
flatware item
Primary source
Description
Dinner Plate
Bread and Butter Plate
Corning Comcor/Corelle
Corning Comcor/Corelle
Fruit Bowl
Cup
Saucer
Serving Bowl
Platter
GlassIced Tea
FlatwareKnife
FlatwareDinner Fork
FlatwareSalad Fork
FlatwareTeaspoon
FlatwareServing Fork
FlatwareServing Spoon
Comcor/Corelle
10 inch Dinner Plate 6.75 inch Bread &
Butter.
10 oz. Dessert Bowl 8 oz. Ceramic Cup ..
6 inch Saucer
1 qt. Serving Bowl
9.5 inch Oval Platter
Corning
Corning Comcor/Corelle
Corning Comcor /Corelle
Corning Comcor/Corelle
Corning Comcor/Corelle
Libbey
OneidaAccent
OneidaAccent
OneidaAccent
OneidaAccent
OneidaFlight
OneidaAccent
2.5 Preconditioning requirements.
The preconditioning requirements described in Section 2.9 of AHAM DW1
2020 are applicable to all dishwashers. For dishwashers that do not have a direct water line, measurement of the prewash fill water volume, Vpw, if any, and measurement of the main wash fill water volume, Vmw, are not taken.
2.6 Detergent.
The detergent requirements described in Section 2.10 of AHAM DW12020 are applicable to all dishwashers. For any dishwasher that does not have a detergent compartment, determine the amount of main wash detergent in grams according to Section 2.10 of AHAM DW12020, or as
VerDate Sep<11>2014
17:32 Dec 21, 2021
Jkt 256001
Primary No.
6003893
6003887
6003899
6014162
6010972
6003911
6011655
551 HT
2619KPVF
2619FRSF
2619FSLF
2619STSF
2865FCM
2619STBF
specified below, and place the detergent directly into the dishwasher chamber.
Additionally, the following detergent and dosage may also be used for all dishwashers.
Note that if the detergent specified in Section 2.10 of AHAM DW12020 is used, then the dosage requirements specified in Section 2.10 of AHAM DW12020 must be used.
Alternately, if the detergent specified below is used, the dosage requirements specified below must be used.
Use Cascade with the Grease Fighting Power of Dawn powder as the detergent formulation. For all dishwashers other than water re-use system dishwashers determine the amount of detergent in grams to be added to the prewash compartment if
PO 00000
Frm 00037
Fmt 4701
Sfmt 4702
72773
dishwashers that do not have a direct water line.
2.3 Non-soil-sensing and soil-sensing dishwashers to be tested at a nominal inlet temperature of 50 F, 120 F, or 140 F.
The test load and soiling requirements for all non-soil-sensing and soil-sensing dishwashers shall be the same as those requirements specified in Section 2.6.3 of AHAM DW12020 for soil-sensing dishwashers. Additionally, both non-soilsensing and soil-sensing compact dishwashers that have a capacity of less than four place settings shall be tested at the rated capacity of the dishwasher and the test load shall be soiled as follows at each soil load:
a. Heavy soil load: Soil two-thirds of the place settings, excluding flatware and serving pieces rounded up to the nearest integer or one place setting, whichever is greater;
b. Medium soil load: Soil one-quarter of the place settings, excluding flatware and serving pieces rounded up to the nearest integer or one place setting, whichever is smaller;
c. Light soil load: Soil one-quarter of the place settings, excluding flatware and serving pieces rounded up to the nearest integer or one place setting, whichever is smaller, using half the quantity of soils specified for one place setting.
2.4 Test load items.
The test load items described in Section 2.7.1 of AHAM DW12020 apply to this test procedure, including the applicable provisions of AHAM DW22020, as referenced in Section 2.7.1 of AHAM DW1
2020. The following test load items may be used in the alternative.
Alternate source
Arzberg
Alternate source No.
Arzberg
Arzberg
Arzberg
8500217100 or 2000
0000102171.
3820513100.
1382000014732.
1382000014731.
WMFGastro 0800
WMFSignum 1900
WMFSignum 1900
WMFSignum 1900
WMFSignum 1900
WMFSignum 1900
12.0803.6047.
12.1905.6040.
12.1964.6040.
12.1910.6040.
12.1902.6040.
12.1904.6040.
provided or elsewhere in the dishwasher if recommended by the manufacturer and the main wash compartment according to Sections 2.6.1 and 2.6.2 of this appendix.
2.6.1 Detergent Dosing for Dishwashers other than Water Re-use System Dishwashers.
2.6.1.1 Prewash Detergent Dosing. If the cycle setting for the test cycle includes prewash, determine the quantity of dry prewash detergent, Dpw, in grams g that results in 0.25 percent concentration by mass in the prewash fill water as:
Dpw = Vpw r k 0.25/100
where, Vpw = the prewash fill volume of water in gallons,
E:FRFM22DEP2.SGM
22DEP2