Voglio sapere a riguardo di…

Federal Register / Vol. 86, No. 221 / Friday, November 19, 2021 / Rules and Regulations dated January 15, 2021 EASA AD 2021
0020. Accomplishing the revision of the existing maintenance or inspection program required by this paragraph terminates the requirements of paragraph g of this AD.
k Exceptions to EASA AD 20210020
1 Where EASA AD 20210020 refers to its effective date, this AD requires using the effective date of this AD.
2 The requirements specified in paragraphs 1 and 2 of EASA AD 2021
0020 do not apply to this AD.
3 Paragraph 3 of EASA AD 20210020
specifies revising the approved AMP
within 12 months after its effective date, but this AD requires revising the existing maintenance or inspection program, as applicable, within 90 days after the effective date of this AD.
4 Except as provided by Note 1 of EASA
AD 20210020, the initial compliance time for doing the tasks specified in paragraph 3
of EASA AD 20210020 is at the applicable thresholds as incorporated by the requirements of paragraph 3 of EASA AD
20210020, or within 90 days after the effective date of this AD, whichever occurs later.
5 The provisions specified in paragraphs 4 and 5 of EASA AD 20210020 do not apply to this AD.
6 The Remarks section of EASA AD
20210020 does not apply to this AD.

khammond on DSKJM1Z7X2PROD with RULES

l New Provisions for Alternative Actions and Intervals After the existing maintenance or inspection program has been revised as required by paragraph j of this AD, no alternative actions e.g., inspections and intervals are allowed unless they are approved as specified in the provisions of the Ref. Publications section of EASA AD
20210020.
m Additional AD Provisions The following provisions also apply to this AD:
1 Alternative Methods of Compliance AMOCs: The Manager, Large Aircraft Section, International Validation Branch, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or local Flight Standards District Office, as appropriate. If sending information directly to the Large Aircraft Section, International Validation Branch, send it to the attention of the person identified in paragraph n of this AD.
Information may be emailed to: 9-AVS-AIR730-AMOC@faa.gov. Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the responsible Flight Standards Office.
2 Contacting the Manufacturer: For any requirement in this AD to obtain instructions from a manufacturer, the instructions must be accomplished using a method approved by the Manager, Large Aircraft Section, International Validation Branch, FAA; or EASA; or ATRGIE Avions de Transport Regionals EASA Design Organization Approval DOA. If approved by the DOA,
VerDate Sep<11>2014

21:40 Nov 18, 2021

Jkt 256001

the approval must include the DOAauthorized signature.
For more information about this AD, contact Shahram Daneshmandi, Aerospace Engineer, Large Aircraft Section, International Validation Branch, FAA, 2200
South 216th St., Des Moines, WA 98198;
telephone and fax 2062313220; email shahram.daneshmandi@faa.gov.
o Material Incorporated by Reference 1 The Director of the Federal Register approved the incorporation by reference IBR of the service information listed in this paragraph under 5 U.S.C. 552a and 1 CFR
part 51.
2 You must use this service information as applicable to do the actions required by this AD, unless this AD specifies otherwise.
3 The following service information was approved for IBR on December 27, 2021.
i European Union Aviation Safety Agency EASA AD 20210020, dated January 15, 2021.
ii Reserved 4 The following service information was approved for IBR on March 31, 2021 86 FR
11103, February 24, 2021.
i European Union Aviation Safety Agency EASA AD 20200173, dated August 5, 2020.
ii Reserved 5 For EASA AD 20210020 and AD 2020
0173, contact EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; telephone +49
221 8999 000; email ADs@easa.europa.eu;
internet www.easa.europa.eu. You may find this EASA AD on the EASA website at https ad.easa.europa.eu.
6 You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 2062313195.
7 You may view this material that is incorporated by reference at the National Archives and Records Administration NARA. For information on the availability of this material at NARA, email fr.inspection@nara.gov, or go to: https
www.archives.gov/federal-register/cfr/ibrlocations.html.
Issued on November 14, 2021.
Ross Landes, Deputy Director for Regulatory Operations, Compliance & Airworthiness Division, Aircraft Certification Service.
FR Doc. 202125203 Filed 111821; 8:45 am BILLING CODE 491013P

Frm 00007

Fmt 4700

DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
n Related Information
PO 00000

64807

Sfmt 4700

14 CFR Part 39
Docket No. FAA20210880; Project Identifier MCAI202100685T; Amendment 3921779; AD 20212206
RIN 2120AA64

Airworthiness Directives; The Boeing Company Airplanes Federal Aviation Administration FAA, DOT.
ACTION: Final rule; request for comments.
AGENCY:

SUMMARY: The FAA is adopting a new airworthiness directive AD for certain The Boeing Company Model 747400F
series airplanes. This AD was prompted by the determination that more restrictive tasks and limitations are necessary. This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate more restrictive tasks and limitations, as specified in a European Union Aviation Safety Agency EASA AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
DATES: This AD becomes effective December 6, 2021.
The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD
as of December 6, 2021.
The FAA must receive comments on this AD by January 3, 2022.
ADDRESSES: You may send comments, using the procedures found in 14 CFR
11.43 and 11.45, by any of the following methods:
Federal eRulemaking Portal: Go to https www.regulations.gov. Follow the instructions for submitting comments.
Fax: 2024932251.
Mail: U.S. Department of Transportation, Docket Operations, M30, West Building Ground Floor, Room W12140, 1200 New Jersey Avenue SE, Washington, DC 20590.
Hand Delivery: Deliver to Mail address above between 9 a.m. and 5
p.m., Monday through Friday, except Federal holidays.
For material incorporated by reference IBR in this AD, contact EASA, KonradAdenauer-Ufer 3, 50668 Cologne, Germany; telephone +49 221 8999 000;
email ADs@easa.europa.eu; internet www.easa.europa.eu. You may find this IBR material on the EASA website at https ad.easa.europa.eu. You may view this material at the FAA, Airworthiness Products Section,
E:FRFM19NOR1.SGM

19NOR1