Voglio sapere a riguardo di…

57984

Federal Register / Vol. 86, No. 199 / Tuesday, October 19, 2021 / Proposed Rules
b. In paragraphs b and h, remove the words of this chapter wherever they appear and add, in their place, the words of this subchapter; and c. In paragraph j, remove the text 46
CFR part 52 or part 53 and add, in its place, the text part 52 or part 53 of this subchapter.

63.257

Amended
365. Amend 63.257a as follows:
a. Remove the words of this chapter wherever they appear and add, in their place, the words of this subchapter;
and b. Remove the text 54.015, Table 54.015A and add, in its place, the text table 1 to 54.015.
366. Amend 63.259 as follows:
a. Revise paragraph a, the introductory text to paragraph b, and paragraph b3;
b. In paragraphs c1 and f6 and 7, and remove the text 46 CFR
wherever it appears and add, in its place, the symbol ; and c. Add paragraph g.
The revisions and addition read as follows:

jspears on DSK121TN23PROD with PROPOSALS2

63.259

Incinerators.

a General. 1 Incinerators installed on or after March 26, 1998, must meet the requirements of IMO MEPC.7640
incorporated by reference; see 63.05
1. Incinerators in compliance with ISO
13617 incorporated by reference; see 63.051, are considered to meet IMO
MEPC.7640. Incinerators in compliance with both ASTM F1323
incorporated by reference; see 63.05
1 and Annexes A1A3 of IMO
MEPC.7640 are considered to meet IMO MEPC.7640.
2 An application for type approval of shipboard incinerators must be sent to the Commanding Officer, Marine Safety Center, U.S. Coast Guard, 2703
Martin Luther King Jr. Ave. SE, Washington, DC 20593, or it may be transmitted by email to the Commanding Officer MSC, at msc@
uscg.mil.
b Testing. Before type approval is granted, the manufacturer must submit evidence that tests have been conducted by an independent third party acceptable to the Commandant CG
ENG. Testing may be conducted at the manufacturers facility. The independent third party must:

3 Have documented proof of the qualifications to perform the inspections and tests required by this section; and

VerDate Sep<11>2014

19:25 Oct 18, 2021

Jkt 256001

g Incinerators designed and tested to meet the requirements of IMO
MEPC.24466 incorporated by reference; see 63.051 are considered equivalent to the requirements of this section and may receive U.S. Coast Guard type approval.
PART 64MARINE PORTABLE TANKS
AND CARGO HANDLING SYSTEMS
367. The authority citation for part 64
continues to read as follows:

Authority: 46 U.S.C. 3306, 3703; 49 U.S.C.
App. 1804; Department of Homeland Security Delegation No. 0170.1.

368. Revise 64.2 to read as follows:

64.2

Incorporation by reference.

a Certain material is incorporated by reference into this part with the approval of the Director of the Federal Register under 5 U.S.C. 552a and 1
CFR part 51. To enforce any edition other than that specified in this section, the Coast Guard must publish a document in the Federal Register and the material must be available to the public. All approved material is available for inspection at the Coast Guard Headquarters. Contact Commandant CGDCOD, Attn:
Deputy for Operations Policy and Capabilities, U.S. Coast Guard Stop 7318, 2703 Martin Luther King Jr.
Avenue SE, Washington, DC 20593
7318, phone 202 3721375, email typeapproval@uscg.mil, and is available from the sources listed elsewhere in this section. It is also available for inspection at the National Archives and Records Administration NARA. For information on the availability of this material at NARA, email fr.inspection@
nara.gov or go to www.archives.gov/
federal-register/cfr/ibr-locations.html.
b American Society of Mechanical Engineers ASME, Two Park Avenue, New York, NY 100165990, 800843
2763, www.asme.org.
1 ASME Boiler and Pressure Vessel Code, Section VIII, Division 1, Pressure Vessels, 1989, with Addenda issued December 31, 1989 Section VIII of the ASME BPVC; IBR approved for 64.5, 64.11, 64.13, 64.21, 64.25, 64.31.
2 Reserved 64.5

Amended
369. In 64.5d, remove the text the ASME Code and add, in its place, the text Section VIII of the ASME BPVC
incorporated by reference; see 64.2.

PO 00000

Frm 00090

Fmt 4701

Sfmt 9990

64.11

Amended
370. In 64.11a, remove the text the ASME Code and add, in its place, the text Section VIII of the ASME
BPVC incorporated by reference; see 64.2.

64.13

Amended
371. Amend 64.13 as follows:
a. In paragraph a, remove the text section VIII of the ASME Code and add, in its place, the text Section VIII
of the ASME BPVC incorporated by reference; see 64.2; and b. In footnote 1 to paragraph b, remove the text the ASME Code and add, in its place, the text Section VIII
of the ASME BPVC.

64.21

Amended
372. In 64.21, remove the text section VIII of the ASME Code and add, in its place, the text Section VIII
of the ASME BPVC incorporated by reference; see 64.2.

64.25

Amended
373. In 64.25b, remove the text the ASME Code and add, in its place, the text Section VIII of the ASME
BPVC incorporated by reference; see 64.2.

64.31

Amended
374. In 64.31, remove the text section VIII of the ASME Code and add, in its place, the text Section VIII
of the ASME BPVC incorporated by reference; see 64.2.

64.63

Amended
375. Amend 64.63 as follows:
a. In paragraph a:
i. Remove the text Table 1 and add, in their place, the text table 1 to 64.63; and ii. Remove the text section VIII of the ASME Code and add, in its place, the text Section VIII of the ASME BPVC
incorporated by reference; see 64.2;
and b. Redesignate table 1 as table 1 to 64.63z.

Dated: July 13, 2021.
J.W. Mauger, Rear Admiral, U.S. Coast Guard, Assistant Commandant for Prevention Policy.
FR Doc. 202115664 Filed 101821; 8:45 am BILLING CODE 911004P

E:FRFM19OCP2.SGM

19OCP2