Voglio sapere a riguardo di…

57972

Federal Register / Vol. 86, No. 199 / Tuesday, October 19, 2021 / Proposed Rules
58.0110

Amended
242. In 58.0110 b, remove the text D 93 and add, in its place, the text D93.
243. Revise 58.0120 to read as follows:

58.0120

Machinery guards.

Gears, couplings, flywheels and all rotating machinery capable of injuring personnel must be provided with adequate covers or guards.
58.0130

Amended
244. In 58.0130, remove the word shall wherever it appears and add, in its place, the word must.
245. Revise 58.0150 to read as follows:

58.0150

Machinery space, noise.

Each machinery space must be designed to minimize the exposure of personnel to noise in accordance with IMO Resolution MSC.33791
incorporated by reference, see 58.03
1.
58.0155

Amended
246. Amend 58.0155 as follows:
a. Redesignate paragraphs ei and ii as e1 and 2; and b. In newly redesignated paragraph e1, remove the words of this subchapter.
247. Revise 58.031 to read as follows:

jspears on DSK121TN23PROD with PROPOSALS2

58.031

Incorporation by reference.

Certain material is incorporated by reference into this part with the approval of the Director of the Federal Register under 5 U.S.C. 552a and 1
CFR part 51. To enforce any edition other than that specified in this section, the Coast Guard must publish a document in the Federal Register and the material must be available to the public. All approved material is available for inspection at the Coast Guard Headquarters. Contact Commandant CGENG, Attn: Office of Design and Engineering Standards, U.S.
Coast Guard Stop 7509, 2703 Martin Luther King Jr. Avenue SE, Washington, DC 205937509, phone 202 3721375, email typeapproval@uscg.mil, and is available from the sources listed elsewhere in this section. It is also available for inspection at the National Archives and Records Administration NARA. For information on the availability of this material at NARA, email fr.inspection@nara.gov or go to www.archives.gov/federal-register/cfr/
ibr-locations.html.
a American Boat and Yacht Council ABYC, 613 Third Street, Suite 10, Annapolis, MD 21403, 410 9904466, www.abycinc.org.

VerDate Sep<11>2014

19:25 Oct 18, 2021

Jkt 256001

1 P114, Installation of Exhaust Systems for Propulsion and Auxiliary Engines, July 2009 reaffirmed July 2014 ABYC P1; IBR approved for 58.105.
2 Reserved b American Bureau of Shipping ABS, 1701 City Plaza Drive, Spring, TX
77389, 2818775800, www.eagle.org.
1 Rules for Building and Classing Marine Vessels, Part 4 Vessel Systems and Machinery, 2020 ABS Marine Vessel Rules; IBR approved for 58.015, 58.051, 58.1015, 58.205, 58.255.
2 Reserved c American Petroleum Institute API, 200 Massachusetts Avenue NW, Washington, DC 200015571, 202682
8000, www.api.org.
1 API RP 14C, Analysis, Design, Installation and Testing of Safety Systems for Offshore Production Facilities, 8th Edition API RP 14C;
IBR approved for 58.609.
2 API STD 53, Well Control Equipment Systems for Drilling Wells, 5th Edition, December 2018 API STD
53; IBR approved for 58.607.
d American Society of Mechanical Engineers ASME, Two Park Avenue, New York, NY 100165990, 800843
2763, www.asme.org.
1 ASME Boiler and Pressure Vessel Code, Section I, Rules for Construction of Power Boilers 2019 Section I of the ASME BPVC; IBR approved for 58.3015.
2 ASME Boiler and Pressure Vessel Code, Section VIII, Division 1, Rules for Construction of Pressure Vessels 2019
Section VIII of the ASME BPVC; IBR
approved for 58.3015.
3 ASME B31.3, Process Piping, January 31, 2017 ASME B31.3; IBR
approved for 58.607.
4 ASME B31.52016, Refrigeration Piping and Heat Transfer Components, June 29, 2016 ASME B31.5; IBR
approved for 58.205, 58.2020.
e ASTM International, 100 Barr Harbor Drive, West Conshohocken, PA
194282959, 8779092786, www.astm.org.
1 ASTM A193/A193M19, Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service or High Pressure Service and Other Special Purpose Applications, November 1, 2019 ASTM A193; IBR approved for 58.3015.
2 ASTM B96/B96M16, Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels, April 1, 2016 ASTM B96; IBR
approved for 58.505.
3 ASTM B122/B122M16, Standard Specification for Copper-Nickel-Tin
PO 00000

Frm 00078

Fmt 4701

Sfmt 4702

Alloy, Copper-Nickel-Zinc Alloy Nickel Silver, and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar, April 1, 2016 ASTM B122; IBR approved for 58.505.
4 ASTM B12719, Standard Specification for Nickel-Copper Alloy UNS NO4400 Plate, Sheet, and Strip.
November 1, 2019 ASTM B127; IBR
approved for 58.505, 58.5010.
5 ASTM B152/B152M19, Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar, October 1, 2019
ASTM B152; IBR approved for 58.505.
6 ASTM B20914, Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate, November 1, 2014 ASTM B209; IBR
approved for 58.505, 58.5010.
7 ASTM D9218, Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester, July 1, 2018
ASTM D92; IBR approved for 58.3010.
8 ASTM D9319, Standard Test Methods for Flash Point by PenskyMartens Closed Cup Tester, November 1, 2019 ASTM D93; 58.0110.
9 ASTM D32315a, Standard Test Method for Vapor Pressure of Petroleum Products Reid Method, June 1, 2015
ASTM D323; IBR approved for 58.165.
f International Maritime Organization IMO, Publications Section, 4 Albert Embankment, London SE1 7SR, United Kingdom, www.imo.org/.
1 A.467XII, Guidelines for Acceptance of Non-Duplicated Rudder Actuators for Tankers, Chemical Tankers and Gas Carriers of 10,000 Tons Gross Tonnage and Above But Less Than 100,000 Tonnes Deadweight, 1981
IMO A.467XII; IBR approved for 58.2560.
2 Resolution MSC.33791, Code on Noise Levels on Board Ships, 2012
IMO Resolution MSC.33791; IBR
approved for 58.0150.
3 The International Convention for the Safety of Life at Sea, 1974, as amended SOLAS; IBR approved for 58.2510.
g National Fire Protection Association NFPA, 1 Batterymarch Park, Quincy, MA 02169, 617770
3000, www.nfpa.org.
1 NFPA 302, Fire Protection Standard for Pleasure and Commercial Motor Craft, 2020 NFPA 302; IBR
approved for 58.105.
2 Reserved h SAE International SAE, 400
Commonwealth Drive, Warrendale, PA
15096, 7247764841, www.sae.org.
1 SAE J429 MAY2014, Mechanical and Material Requirements for
E:FRFM19OCP2.SGM

19OCP2