Voglio sapere a riguardo di…

57024

Federal Register / Vol. 86, No. 196 / Thursday, October 14, 2021 / Rules and Regulations
Authority for This Rulemaking Title 49 of the United States Code specifies the FAAs authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. Subtitle VII:
Aviation Programs, describes in more detail the scope of the Agencys authority.
The FAA is issuing this rulemaking under the authority described in Subtitle VII, Part A, Subpart III, Section 44701: General requirements. Under that section, Congress charges the FAA
with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce.
This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action.
Regulatory Findings This AD will not have federalism implications under Executive Order 13132. This AD will not have a substantial direct effect on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government.
For the reasons discussed above, I
certify that this AD:
1 Is not a significant regulatory action under Executive Order 12866, 2 Will not affect intrastate aviation in Alaska, and 3 Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act.
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation safety, Incorporation by reference, Safety.
The Amendment Accordingly, under the authority delegated to me by the Administrator, the FAA amends 14 CFR part 39 as follows:

1. The authority citation for part 39
continues to read as follows:

lotter on DSK11XQN23PROD with RULES1

Authority: 49 U.S.C. 106g, 40113, 44701.
Amended
2. The FAA amends 39.13 by adding the following new airworthiness directive:

VerDate Sep<11>2014

16:23 Oct 13, 2021

Jkt 256001

a Effective Date This airworthiness directive AD is effective November 18, 2021.
b Affected ADs None.
c Applicability This AD applies to all Dassault Aviation Model FALCON 7X, FALCON 900EX, and FALCON 2000EX airplanes, certificated in any category.
d Subject Air Transport Association ATA of America Code 25, Equipment/Furnishings.
e Reason This AD was prompted by a report of a manufacturing issue involving misalignment of a seat pin and plate that can prevent the recline locking mechanism from properly engaging when the seat is in taxi, take-off, or landing position. The FAA is issuing this AD
to address cabin seats having improper or no engagement of the recline locking mechanism during taxi, take-off, or landing, which could result in reduced seat performance under crash loads and possible injury to seat occupants.
f Compliance Comply with this AD within the compliance times specified, unless already done.
g Requirements Except as specified in paragraph h of this AD: Comply with all required actions and compliance times specified in, and in accordance with, European Union Aviation Safety Agency EASA AD 20200284, dated December 18, 2020 EASA AD 20200284.
h Exceptions to EASA AD 20200284
1 Where EASA AD 20200284 refers to its effective date, this AD requires using the effective date of this AD.
2 This AD does not mandate compliance with the Remarks section of EASA AD
20200284.
3 Where paragraph 2 of EASA AD 2020
0284 specifies action if any discrepancy is detected for this AD, a discrepancy is a gap between the seat pin and plate.
i No Reporting Requirement Although the service information referenced in EASA AD 20200284 specifies to submit certain information to the manufacturer, this AD does not include that requirement.

PART 39AIRWORTHINESS
DIRECTIVES

39.13

20212014 Dassault Aviation:
Amendment 3921752; Docket No.
FAA20210569; Project Identifier MCAI202001692T.

j Additional AD Provisions The following provisions also apply to this AD:
1 Alternative Methods of Compliance AMOCs: The Manager, Large Aircraft Section, International Validation Branch, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with
PO 00000

Frm 00014

Fmt 4700

Sfmt 9990

14 39.19, send your request to your principal inspector or responsible Flight Standards Office, as appropriate. If sending information directly to the Large Aircraft Section, International Validation Branch, send it to the attention of the person identified in paragraph k of this AD. Information may be emailed to: 9-AVS-AIR-730-AMOC@faa.gov.
Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the responsible Flight Standards Office.
2 Contacting the Manufacturer: For any requirement in this AD to obtain instructions from a manufacturer, the instructions must be accomplished using a method approved by the Manager, Large Aircraft Section, International Validation Branch, FAA; or EASA; or Dassault Aviations EASA Design Organization Approval DOA. If approved by the DOA, the approval must include the DOA-authorized signature.
k Related Information For more information about this AD, contact Tom Rodriguez, Aerospace Engineer, Large Aircraft Section, FAA, International Validation Branch, 2200 South 216th St., Des Moines, WA 98198; telephone and fax 206
2313226; email tom.rodriguez@faa.gov.
l Material Incorporated by Reference 1 The Director of the Federal Register approved the incorporation by reference of the service information listed in this paragraph under 5 U.S.C. 552a and 1 CFR
part 51.
2 You must use this service information as applicable to do the actions required by this AD, unless this AD specifies otherwise.
i European Union Aviation Safety Agency EASA AD 20200284, dated December 18, 2020.
ii Reserved 3 For EASA AD 20200284, contact EASA, Konrad-Adenauer-Ufer 3, 50668
Cologne, Germany; telephone +49 221 8999
000; email ADs@easa.europa.eu; internet www.easa.europa.eu. You may find this EASA AD on the EASA website at https
ad.easa.europa.eu.
4 You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 2062313195.
5 You may view this material that is incorporated by reference at the National Archives and Records Administration NARA. For information on the availability of this material at NARA, email fr.inspection@nara.gov, or go to: https
www.archives.gov/federal-register/cfr/ibrlocations.html.
Issued on September 21, 2021.
Gaetano A. Sciortino, Deputy Director for Strategic Initiatives, Compliance & Airworthiness Division, Aircraft Certification Service.
FR Doc. 202122294 Filed 101321; 8:45 am BILLING CODE 491013P

E:FRFM14OCR1.SGM

14OCR1