Federal Register - October 14, 2021
Versione di testo Cosa è?Dateas è un sito indipendente non affiliato a entità governative. La fonte dei documenti PDF che pubblichiamo qui è l'entità governativa indicata in ciascuno di essi. Le versioni in testo sono trascrizioni che realizziamo per facilitare l'accesso e la ricerca di informazioni, ma possono contenere errori o non essere complete.
Source: Federal Register
57022
Federal Register / Vol. 86, No. 196 / Thursday, October 14, 2021 / Rules and Regulations TABLE 1 TO PARAGRAPH b10
Preservative
Analytical method
Referee method
Pentachlorophenol
Creosote
Waterborne
Copper Naphthenate
DCOI
XRF, Lime Ignition, Copper Pyridine
Toluene Extraction
XRF
XRF
XRF, HPLC
Lime Ignition, Copper Pyridine.
Toluene Extraction.
XRF.
ICP, GC.
HPLC.
Note 1 to table 1 to paragraph b10: XFR means X-ray fluorescence; HPLC means High Performance Liquid Chromatography; ICP means Inductively coupled plasma; and GC means Gas Chromatography.
d Preservatives. Creosote, waterborne preservatives, pentachlorophenol, DCOI, and copper naphthenate shall conform to current AWPA U1 incorporated by reference in 1728.97.
e
5
Note 2 to table 2 to paragraph e5:
Retention and penetration requirements for each different species and preservative are listed in Table 8 of Appendix A, RUS
Bulletin 1728F700, Specification for Wood Poles, Stubs and Anchor Logs incorporated by reference at 1728.97.
7 Penetration compliance of both poles and crossarms shall be determined in accordance with the standard AWPA
A15 incorporated by reference at 1728.97. Chrome Azurol S shall be used to determine the penetration of copper containing preservatives AWPA
A69 incorporated by reference at 1728.97, Penta-Check shall be used to determine the penetration of penta
AWPA A70 incorporated by reference at 1728.97, and Red-O dye for penetration of DCOI AWPA A71
incorporated by reference at 1728.97, respectively.
g
2 Third-party inspectors shall verify their acceptance of untreated crossarms that have been offered by the producer as conforming by marking each accepted piece in one end with a clear, legible hammer stamp. Following treatment, inspectors shall verify their acceptance of treated crossarms that have been offered by the producer as conforming by marking each accepted piece in the opposing end with a clear, legible hammer stamp. The inspector shall personally mark each piece for acceptance and shall not delegate this responsibility to any other individual.
Issue date
a 1728.202
9.9.2021
FR Doc. 202122255 Filed 101321; 8:45 am BILLING CODE 341015P
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration 14 CFR Part 39
Airworthiness Directives; Dassault Aviation Airplanes Federal Aviation Administration FAA, DOT.
ACTION: Final rule.
lotter on DSK11XQN23PROD with RULES1
AGENCY:
The FAA is adopting a new airworthiness directive AD for all Dassault Aviation Model FALCON 7X, FALCON 900EX, and FALCON 2000EX
SUMMARY:
Jkt 256001
1755.97 Telephone standards and specifications.
b
13 Bulletin 1728F700, RUS
Specification for Wood Poles, Stubs and Anchor Logs, September 9, 2021.
8. Amend 1755.98 by revising paragraph a to read as follows:
1755.98 List of telecommunications specifications included in other 7 CFR
parts.
PO 00000
RIN 2120AA64
16:23 Oct 13, 2021
7. Amend 1755.97 by revising paragraph b13 to read as follows:
RUS Specification for Quality Control and Inspection of Timber Products.
Docket No. FAA20210569; Project Identifier MCAI202001692T; Amendment 3921752; AD 20212014
VerDate Sep<11>2014
Authority: 7 U.S.C. 901 et seq., 1921 et seq., 6941 et seq.
Title
Christopher A. McLean, Acting Administrator, Rural Utilities Service.
6. The authority citation for part 1755
continues to read as follows:
Section
PART 1755TELECOMMUNICATIONS
POLICIES ON SPECIFICATIONS, ACCEPTABLE MATERIALS, AND
STANDARD CONTRACT FORMS
Frm 00012
Fmt 4700
Sfmt 4700
airplanes. This AD was prompted by a report of a manufacturing issue involving misalignment of a cabin seat pin and plate that can prevent the recline locking mechanism from properly engaging when the seat is in taxi, take-off, or landing position. This AD requires an inspection of certain cabin seats for discrepancies and corrective action, as specified in European Union Aviation Safety Agency EASA AD, which is incorporated by reference. The FAA is issuing this AD
to address the unsafe condition on these products.
This AD is effective November 18, 2021.
The Director of the Federal Register approved the incorporation by reference
DATES:
E:FRFM14OCR1.SGM
14OCR1
