Voglio sapere a riguardo di…

46828

Federal Register / Vol. 86, No. 159 / Friday, August 20, 2021 / Notices
the United States is materially injured within the meaning of section 705b1Ai of the Act by reason of subsidized imports of metal lockers from China.8 Therefore, in accordance with sections 705c2 and 706 of the Act, Commerce is issuing this CVD
order. Because the ITC determined that subsidized imports of metal lockers from China are materially injuring a U.S. industry, unliquidated entries of subject merchandise from China entered, or withdrawn from warehouse, for consumption, are subject to the assessment of countervailing duties.
Therefore, in accordance with section 706a1 of the Act, Commerce intends to direct CBP to assess, upon further instruction by Commerce, countervailing duties on unliquidated entries of subject merchandise from China entered, or withdrawn from warehouse, for consumption on or after December 14, 2020, the date of publication of the CVD Preliminary Determination, but will not include entries occurring after the expiration of the provisional measure period and before the publication of the ITCs final injury determination under section 705b of the Act, as further described in the Provisional MeasuresCVD
section of this notice.9

khammond on DSKJM1Z7X2PROD with NOTICES

Suspension of Liquidation and Cash DepositsCVD
In accordance with section 706 of the Act, Commerce intends to instruct CBP
to reinstitute the suspension of liquidation of all relevant entries of metal lockers from China, effective on the date of publication of the ITCs final affirmative injury determination in the Federal Register, and to assess, upon further instruction by Commerce, pursuant to section 706a1 of the Act, countervailing duties for each entry of subject merchandise in an amount based on the net countervailable subsidy rates below. On or after the date of publication of the ITCs final injury determination in the Federal Register, CBP must require, at the same time as importers would normally deposit estimated duties on subject merchandise, a cash deposit for each entry of subject merchandise equal to the subsidy rates listed below.10 These instructions suspending liquidation will remain in effect until further notice. The 8 See
ITC Notification Letter.
Certain Metal Lockers and Parts Thereof from the Peoples Republic of China: Preliminary Affirmative Countervailing Duty Determination and Alignment of Final Determination with Final Antidumping Duty Determination, 85 FR 80771
December 14, 2020 CVD Preliminary Determination.
10 See section 706a3 of the Act.
9 See
VerDate Sep<11>2014

17:27 Aug 19, 2021

Jkt 253001

all-others rate applies to all producers or exporters not specifically listed below, as appropriate:
Subsidy rate percent
Company Zhejiang Xingyi Metal Products Co., Ltd
Changshu Taron Machinery Equipment Manufacturing Co., Ltd
Guangdong Yuhua Building Materials Co., Ltd
Jiangsu Tongrun Tool Cabinet Co., Ltd
Luoyang Mas Younger Office Furniture Co./Luoyang Mas Younger Export and Import Co Luoyang Shidiu Import and Export Co., Ltd
Suzhou Yuanda Commercial Products Co. Ltd
Winnsen Industry Co., Ltd
Xiamen Headleader Technology All Others

24.66
131.51
131.51
131.51
131.51
131.51
131.51
131.51
131.51
24.66

Provisional MeasuresCVD
Section 703d of the Act states that the suspension of liquidation pursuant to an affirmative preliminary determination may not remain in effect for more than four months. Commerce published the CVD Preliminary Determination on December 14, 2020.11
Accordingly, the provisional measures period, beginning on the date of publication of the CVD Preliminary Determination, ended on April 12, 2021.
Pursuant to section 707b of the Act, the collection of cash deposits at the rates listed above will begin on the date of publication of the ITCs final affirmative injury determination.
Therefore, in accordance with section 703d of the Act, Commerce instructed CBP to terminate the suspension of liquidation and to liquidate, without regard to countervailing duties, unliquidated entries of metal lockers from China entered, or withdrawn from warehouse, for consumption, after April 12, 2021, the date on which the provisional measures expired.
Suspension of liquidation will resume on the date of publication of the ITCs final affirmative injury determinations in the Federal Register.
Notification to Interested Parties This notice constitutes the AD and CVD orders with respect to metal lockers from China pursuant to sections 706a and 736a of the Act. Interested parties can find a list of orders currently in effect at http enforcement.trade.gov/
stats/iastats1.html.
11 See
PO 00000

CVD Preliminary Determination.

Frm 00008

Fmt 4703

Sfmt 4703

These orders are published in accordance with sections 706a and 736a of the Act and 19 CFR 351.211b.
Dated: August 16, 2021.
Christian Marsh, Acting Assistant Secretary for Enforcement and Compliance.

Appendix Scope of the Orders The scope of the orders covers certain metal lockers, with or without doors, and parts thereof metal lockers. The subject metal lockers are secure metal storage devices less than 27 inches wide and less than 27 inches deep, whether floor standing, installed onto a base or wall-mounted. In a multiple locker assembly whether a welded locker unit, otherwise assembled locker unit or knocked down unit or kit, the width measurement shall be based on the width of an individual locker not the overall unit dimensions. All measurements in this scope are based on actual measurements taken on the outside dimensions of the single-locker unit. The height is the vertical measurement from the bottom to the top of the unit. The width is the horizontal side to side measurement of the front of the unit, and the front of the unit is the face with the door or doors or the opening for internal access of the unit if configured without a door. The depth is the measurement from the front to the back of the unit. The subject certain metal lockers typically include the bodies back, side, shelf, top and bottom panels, door frames with or without doors which can be integrated into the sides or made separately, and doors.
The subject metal lockers typically are made of flat-rolled metal, metal mesh and/or expanded metal, which includes but is not limited to alloy or non-alloy steel whether or not galvanized or otherwise metallically coated for corrosion resistance, stainless steel, or aluminum, but the doors may also include transparent polycarbonate, Plexiglas or similar transparent material or any combination thereof. Metal mesh refers to both wire mesh and expanded metal mesh.
Wire mesh is a wire product in which the horizontal and transverse wires are welded at the cross-section in a grid pattern. Expanded metal mesh is made by slitting and stretching metal sheets to make a screen of diamond or other shaped openings.
Where the product has doors, the doors are typically configured with or for a handle or other device or other means that permit the use of a mechanical or electronic lock or locking mechanism, including, but not limited to: A combination lock, a padlock, a key lock including cylinder locks lever or knob lock, electronic key pad, or other electronic or wireless lock. The handle and locking mechanism, if included, need not be integrated into one another. The subject locker may or may not also enter with the lock or locking device included or installed.
The doors or body panels may also include vents including wire mesh or expanded metal mesh vents or perforations. The bodies, body components and doors are typically powder coated, otherwise painted
E:FRFM20AUN1.SGM

20AUN1