Voglio sapere a riguardo di…

46596

Federal Register / Vol. 86, No. 158 / Thursday, August 19, 2021 / Rules and Regulations
Explosives see 27 CFR parts 447, 478, and 479, as a firearm.
f. through w. Reserved x. Parts and components that are specially designed for a commodity classified under paragraphs .a through .c of this entry or the USML and not elsewhere specified on the USML or CCL.
y. Specific parts, components, accessories and attachments specially designed for a commodity subject to control in this ECCN or common to a defense article in USML Category I and not elsewhere specified in the USML or CCL as follows, and parts, components, accessories, and attachments specially designed therefor.
y.1. Stocks including adjustable, collapsible, blades and braces, grips, handguards, or forends, that do not contain any fire control parts or components e.g., triggers, hammers/striker, sears, disconnectors;
y.2 to y.5. RESERVED
y.6. Bayonets; and y.7. Firearms manufactured from 1890 to 1898 and reproductions thereof.
Technical Note 1 to 0A501: The controls on parts and components in ECCN
0A501 include those parts and components that are common to firearms described in ECCN 0A501 and to those firearms subject to the ITAR.

Classification Number ECCN 0A505 to read as follows:
0A505 Ammunition as follows see List of Items Controlled.
License Requirements Reason for Control: NS, RS, CC, FC, UN, AT
Controls NS applies to 0A505.a and .x.
RS applies to 0A505.a and .x.
CC applies to 0A505.b.
FC applies to entire entry except 0A505.d.
UN applies to entire entry.
AT applies to 0A505.a, .d, and .x.
AT applies to 0A505.c
Technical Note 2 to 0A501: A receiver with any other controlled part or component e.g., a barrel 0A501.c, or trigger guard 0A501.x, or stock 0A501.y.1 is still controlled under 0A501.e.
Note 4 to 0A501: Antique firearms i.e., those manufactured before 1890 and reproductions thereof, muzzle loading and black powder firearms except those designs based on centerfire weapons of a post 1937
design, BB guns, pellet rifles, paint ball, and all other air rifles are EAR99 commodities.
Note 5 to 0A501: Muzzle loading and black powder firearms with a caliber less than 20
mm that were manufactured post 1937 that are used for hunting or sporting purposes that were not specially designed for military use and are not subject to the ITAR nor controlled as shotguns under ECCN 0A502 are EAR99 commodities.

lotter on DSK11XQN23PROD with RULES1

Note 6 to 0A501: Scope mounts or accessory rails, iron sights, sling swivels, and butt plates or recoil pads are designated as EAR99. These commodities have been determined to no longer warrant being specially designed for purposes of ECCN
0A501.
Note 7 to 0A501: A kit, including a replacement or repair kit, of firearms parts or components customarily sold and exported together takes on the classification of the most restrictive part or component that is included in the kit. For example, a kit containing 0A501.y and .x parts, is controlled as a 0A501.x kit because the .x part is the most restrictive part included in the kit. A complete firearm disassembled in a kit form is controlled as a firearm under 0A501.a, .b, or .y.7.

15. In Supplement No. 1 to part 774, Category 0, revise Export Control

VerDate Sep<11>2014

16:12 Aug 18, 2021

Jkt 253001

Country chart see supp. No. 1 to part 738
NS Column 1
RS Column 1
CC Column 1
FC Column 1
See 746.1 of the EAR for UN controls AT Column 1
A license is required for items controlled by paragraph .c of this entry to North Korea for anti-terrorism reasons.
The Commerce Country Chart is not designed to determine AT licensing requirements for this entry. See 742.19 of the EAR for additional information.

List Based License Exceptions See Part 740
for a Description of All License Exceptions LVS: $500 for items in 0A505.x, except $3,000 for items in 0A505.x that, immediately prior to March 9, 2020, were classified under 0A018.b. i.e., Specially designed components and parts for ammunition, except cartridge cases, powder bags, bullets, jackets, cores, shells, projectiles, boosters, fuses and components, primers, and other detonating devices and ammunition belting and linking machines all of which are subject to the ITAR. See 22 CFR parts 120
through 130
GBS: N/A
Special Conditions for STA
STA: Paragraph c2 of License Exception STA 740.20c2 of the EAR may not be used for any item in 0A505.

caps, and lead balls and bullets, for use with muzzle-loading firearms are EAR99
items.
Related Definitions: Marking rounds are non-lethal, typically used for training purposes, and contain a dye or paint in a capsule that is not a chemical irritant.
Items:
a. Ammunition for firearms controlled by ECCN 0A501 or USML Category I and not enumerated in paragraph .b, .c, or .d of this entry or in USML Category III.
b. Buckshot No. 4 .24 diameter and larger, any material shotgun shells and shotgun shells that contain only, or are for the dispersion of chemical irritants.
c. Shotgun shells including less than lethal rounds that do not contain buckshot;
and specially designed parts and components of shotgun shells.
d. Blank ammunition for firearms controlled by ECCNs 0A501 or 0A502 and not enumerated in USML Category III.
Technical Note to 0A505.d: Includes marking rounds that have paint/dye as the projectile.
e. through w. Reserved x. Parts and components that are specially designed for a commodity subject to control in this ECCN or a defense article in USML Category III and not elsewhere specified on the USML or the CCL.
Note 1 to 0A505.x: The controls on parts and components in this entry include Berdan and boxer primers, metallic cartridge cases, and standard metallic projectiles such as full metal jacket, lead core, copper projectiles, and frangible projectiles.
Note 2 to 0A505.x: The controls on parts and components in this entry include those parts and components that are common to ammunition and ordnance described in this entry and to those enumerated in USML Category III.
Note 3 to 0A505: Metal shot smaller than No. 4 Buckshot, empty and unprimed shotgun shells, shotgun wads, smokeless gunpowder, dummy rounds and drill rounds unless linked or belted, not incorporating a lethal or non-lethal projectiles are designated EAR99. A
dummy round or drill round is a round that is completely inert, i.e., contains no primer, propellant, or explosive charge. It is typically used to check weapon function and for crew training.
Note 4 to 0A505: Shotgun shells that contain two or more balls/shot larger than .24-inch are controlled under 0A505.b.

16. In Supplement No. 1 to part 774, Category 0, revise Export Control Classification Number ECCN 0B501 to List of Items Controlled Related Controls: 1 Ammunition for modern read as follows:
heavy weapons such as howitzers, artillery, cannon, mortars and recoilless rifles as well as inherently military ammunition types such as ammunition preassembled into links or belts, caseless ammunition, tracer ammunition, ammunition with a depleted uranium projectile or a projectile with a hardened tip or core and ammunition with an explosive projectile are subject to the ITAR. 2 Percussion
PO 00000

Frm 00018

Fmt 4700

Sfmt 4700

0B501 Test, inspection, and production equipment and related commodities for the development or production of commodities enumerated or otherwise described in ECCN 0A501 or USML Category I as follows see List of Items Controlled.
License Requirements Reason for Control: NS, RS, UN, AT

E:FRFM19AUR1.SGM

19AUR1