Voglio sapere a riguardo di…

jbell on DSKJLSW7X2PROD with PROPOSALS4

Federal Register / Vol. 86, No. 151 / Tuesday, August 10, 2021 / Proposed Rules Stabilization of fish meal or fish scrap must occur at the time of production and the application must be within twelve months prior to shipment.
b Transportation by air. 1 Except as provided in Column 7 of the HMT
in 172.101 of this subchapter, fish meal or fish scrap, containing at least 6%, but not more than 12% water, is authorized for transportation in packagings as follows:
i The following combination packagings are authorized:
Outer packagings: Steel drum: 1A1 or 1A2; Aluminum drum: 1B1 or 1B2;
Metal drum other than steel or aluminum: 1N1 or 1N2; Fiber drum: 1G;
Plastic drum: 1H1 or 1H2; Steel jerrican:
3A1 or 3A2; Plastic jerrican: 3H1 or 3H2; Aluminum jerrican: 3B1 or 3B2;
Steel box: 4A; Aluminum box: 4B;
Natural wood box: 4C1 or 4C2; Plywood box: 4D; Reconstituted wood box: 4F;
Fiberboard box: 4G; Solid plastic box:
4H2; or Metal box other than steel or aluminum: 4N.
Inner packagings: Glass, Fiber, Metal, or Plastic.
ii The following single packagings are authorized:
Steel drum: 1A1 or 1A2; Aluminum drum: 1B1 or 1B2; Plywood drum with liner: 1D; Plastic drum: 1H1 or 1H2;
Fiber drum with liner: 1G; Metal drum other than steel or aluminum: 1N1 or 1N2; Steel jerrican: 3A1 or 3A2; Plastic jerrican: 3H1 or 3H2; Aluminum jerrican: 3B1 or 3B2; Steel box: 4A;
Aluminum box: 4B; Metal box other than steel or aluminum: 4N; Natural wood box with liner: 4C2; Plywood box with liner: 4D; Reconstituted wood box with liner: 4F; Fiberboard box with liner: 4G; Solid plastic box: 4H2; Bag, woven plastic: 5H3; Bag, plastic film:
5H4; Bag, textile: 5L3; Bag, paper, multiwall, water resistant: 5M2; Plastic receptacle in steel, aluminum, plywood, fiber or plastic drum: 6HA1, 6HB1, 6HD1, 6HG1 or 6HH1; Plastic receptacle in steel, aluminum, wood, plywood or fiberboard box: 6HA2, 6HB2, 6HC, 6HD2, 6HG2 or 6HH2; or Cylinders, as prescribed for any compressed gas, except for Specification 8 and 3HT.
2 The fish meal or fish scrap must contain at least 50 ppm mg/kg of ethoxyquin, 100 ppm mg/kg of butylated hydroxytoluene BHT, or 250
ppm mg/kg of tocopherol-based antioxidant at the time of shipment.
Stabilization of fish meal or fish scrap must occur at the time of production and the application must be within twelve months prior to shipment.
29. In 173.221, revise paragraph a to read as follows:

VerDate Sep<11>2014

19:16 Aug 09, 2021

Jkt 253001

173.221 Polymeric beads, expandable and Plastic molding compound.

a For non-bulk shipments of Polymeric beads or granules, expandable evolving flammable vapor and Plastic molding compound in dough, sheet or extruded rope form, evolving flammable vapor the following packagings are authorized:
1 Single packagings: Metal box 4A, 4B, or 4N; Wooden box 4C1 or 4C2;
Plywood box 4D; Fiberboard box 4G;
Reconstituted wood box 4F; Plastic box 4H1 or 4H2; Plywood drums: 1D
or Fiber drums 1G with sealed inner plastic liners; in vapor tight metal or plastic drums 1A1, 1A2, 1B1, 1B2, 1N1, 1N2, 1H1 or 1H2; or in vapor tight metal or plastic jerricans 3A1, 3A2, 3B1, 3B2, 3H1, or 3H2.
2 Combination packagings: i Outer packagings: Steel drum: 1A1 or 1A2;
Aluminum drum: 1B1 or 1B2; Plywood drum: 1D; Fiber drum: 1G; Plastic drum:
1H1 or 1H2; Metal drum other than steel or aluminum: 1N1 or 1N2; Steel jerrican: 3A1 or 3A2; Plastic jerrican:
3H1 or 3H2; Aluminum jerrican: 3B1 or 3B2; Steel box: 4A; Aluminum box: 4B;
Natural wood box: 4C1 or 4C2; Plywood box: 4D; Reconstituted wood box: 4F;
Fiberboard box: 4G; Plastic box: 4H1 or 4H2; or Metal box other than steel or aluminum: 4N.
ii Inner packagings: Glass receptacles, Plastic receptacles, Metal receptacles, Paper receptacles, Fiber receptacles.
3 Non-specification packagings when transported in dedicated vehicles or freight containers. The packagings need not conform to the requirements for package testing in part 178 of this subchapter, but must be capable of containing any evolving gases from the contents during normal conditions of transportation.

30. Revise 173.222 to read as follows:
173.222 Dangerous goods in articles, machinery, or apparatus.

Hazardous materials in articles, machinery, or apparatus are excepted from the specification packaging requirements of this subchapter when packaged according to this section.
Hazardous materials in articles, machinery, or apparatus must be packaged in strong outer packagings, unless the receptacles containing the hazardous materials are afforded adequate protection by the construction of the article, machinery, or apparatus.
Each package must conform to the packaging requirements of subpart B of this part, except for the requirements in
PO 00000

Frm 00051

Fmt 4701

Sfmt 4702

43893

173.24a1 and 173.27e, and the following requirements:
a If the article, machinery, or apparatus contains more than one hazardous material, the materials must not be capable of reacting dangerously together.
b The nature of the containment must be as follows 1 Damage to the receptacles containing the hazardous materials during transport is unlikely. However, in the event of damage to the receptacles containing the hazardous materials, no leakage of the hazardous materials from the article, machinery or apparatus is possible. A leakproof liner may be used to satisfy this requirement.
2 Receptacles containing hazardous materials must be secured and cushioned so as to prevent their breakage or leakage and so as to control their shifting within the article, machinery, or apparatus during normal conditions of transportation. Cushioning material must not react dangerously with the content of the receptacles. Any leakage of the contents must not substantially impair the protective properties of the cushioning material.
3 Receptacles for gases, their contents and filling densities must conform to the applicable requirements of this subchapter, unless otherwise approved by the Associate Administrator.
c1 Except for transportation by aircraft, the total net quantity of hazardous materials contained in one item of an article, machinery, or apparatus must not exceed the following:
i In the case of solids or liquids, the limited quantity amount specified in the corresponding section referenced in Column 8A of the 172.101 Table;
ii 0.5 kg 1.1 pounds in the case of Division 2.2 gases.
iii When an article, machinery, or apparatus contains multiple hazardous materials, the quantity of each hazardous material must not exceed the quantity specified in the corresponding section referenced in Column 8A of the 172.101 Table, or for gases, paragraph c1ii of this section.
2 For transportation by aircraft, the total net quantity of hazardous materials contained in one item of an article, machinery, or apparatus must not exceed the following:
i 1 kg 2.2 pounds in the case of solids;
ii 0.5 L 0.1 gallons in the case of liquids;
iii 0.5 kg 1.1 pounds in the case of Division 2.2 gases. Division 2.2 gases with subsidiary risks and refrigerated liquefied gases are not authorized;

E:FRFM10AUP4.SGM

10AUP4