Voglio sapere a riguardo di…

Federal Register / Vol. 86, No. 143 / Thursday, July 29, 2021 / Rules and Regulations other than that specified in this section, DOE must publish a document in the Federal Register and the material must be available to the public. Standards can be obtained from the sources in this section. All approved material is available for inspection at the U.S.
Department of Energy, Office of Energy Efficiency and Renewable Energy, Building Technologies Program, sixth Floor, 950 LEnfant Plaza SW, Washington, DC 20024, 202 5862945, https www.energy.gov/eere/buildings/
appliance-and-equipment-standardsprogram, and may be obtained from the other sources in this section. It is also available for inspection at the National Archives and Records Administration NARA. For information on the availability of this material at NARA, email: fedreg.legal@nara.gov, or go to:
www.archives.gov/federal-register/cfr/
ibr-locations.html.
b CSA. Canadian Standards Association, Sales Department, 5060
Spectrum Way, Suite 100, Mississauga, Ontario, L4W 5N6, Canada, 1800463
6727, or https www.csagroup.org/
store.
1 CSA C74709 Reaffirmed 2014
CSA C74709, Energy efficiency test method for small motors as revised through August 2016, including Update No. 1; IBR approved for 431.484.
2 Reserved c UL. Underwriters Laboratories, 333
Pfingsten Road, Northbrook, IL 60062, 841 2728800, or go to https
www.ul.com.
1 UL 100410 100410:2020, Standard for Safety for Pool Pump Motors, First Edition, Dated February 28, 2020; IBR approved for 431.481
and 431.483.
2 Reserved 431.483

Definitions.

The definitions applicable to this subpart are defined in Section 2
Glossary of UL 100410:2020
incorporated by reference, see 431.482.

jbell on DSKJLSW7X2PROD with RULES

431.484

Test procedure.

a Scope. Pursuant to section 343a of EPCA, this section provides the test procedures for measuring the efficiency of dedicated-purpose pool pump motors. 42 U.S.C. 6314 For purposes of this part and EPCA, the test procedures for measuring the efficiency of dedicated-purpose pool pump motors shall be the test procedure specified in paragraph b of this section.
b Testing and calculations. At such time as compliance is required with a labeling requirement or an energy conservation standard, the full-load efficiency of each dedicated-purpose
VerDate Sep<11>2014

16:17 Jul 28, 2021

Jkt 253001

pool pump motor model inclusive of the drive, if the dedicated-purpose pool pump motor model is placed into commerce with a drive, or is unable to operate without the presence of a drive is determined in accordance with CSA
C74709, Section 1.6 Scope, Section 3 Definitions, Section 4 General requirements, Section 5, General test requirements, and Section 6 Test method incorporated by reference, see 431.482.
FR Doc. 202115759 Filed 72821; 8:45 am BILLING CODE 645001P

40775

and explain why you believe SBA
should hold this information as confidential. SBA will review the information and make the final determination whether it will publish the information.
FOR FURTHER INFORMATION CONTACT:
Linda Reilly, Chief, 504 Program Branch, Office of Financial Assistance, Small Business Administration, 409 3rd Street SW, Washington, DC 20416;
telephone: 202 6045032; email:
linda.reilly@sba.gov.
SUPPLEMENTARY INFORMATION:
I. Background Information
SMALL BUSINESS ADMINISTRATION
13 CFR Part 120
RIN 3245AH78

Debt Refinancing in the 504 Loan Program U.S. Small Business Administration SBA.
ACTION: Interim final rule with request for comments.
AGENCY:

This interim final rule implements section 328 of the Economic Aid to Hard-Hit Small Businesses, Nonprofits, and Venues Act, which revises the requirements for refinancing debt in the 504 Loan Program, including: For 504 debt refinancing involving expansions, increasing the amount of existing indebtedness that may be refinanced; and for 504 debt refinancing not involving expansions, removing two limitations on the program, reinstating an alternate job retention goal for the refinancing project, revising the definition of qualified debt, and removing the prohibition against Certified Development Companies CDCs participating in the Premier Certified Lenders Program using their delegated authority to make these loans.
DATES: Effective Date: This rule is effective July 29, 2021.
Comment Date: Comments must be received on or before September 27, 2021.
ADDRESSES: You may submit comments, identified by RIN 3245AH78, through the Federal eRulemaking Portal: http
www.regulations.gov. Follow the instructions for submitting comments.
SBA will post all comments on http
www.regulations.gov. If you wish to submit confidential business information CBI as defined in the User Notice at http www.regulations.gov, please submit the information via email to 504refi@sba.gov. Highlight the information that you consider to be CBI
SUMMARY:

PO 00000

Frm 00013

Fmt 4700

Sfmt 4700

The 504 Loan Program is an SBA
financing program authorized under title V of the Small Business Investment Act of 1958, 15 U.S.C. 695 et seq. The core mission of the 504 Loan Program is to provide long-term financing to small businesses for the purchase or improvement of land, buildings, and major equipment, in an effort to facilitate the creation or retention of jobs and local economic development. Under the 504 Loan Program, loans are made to small business applicants by Certified Development Companies CDCs, which are certified and regulated by SBA to promote economic development within their community. In general, a project in the 504 Loan Program a 504
Project includes: A loan obtained from a private sector lender with a senior lien covering at least 50 percent of the project cost; a loan obtained from a CDC
a 504 Loan with a junior lien covering up to 40 percent of the total cost backed by a 100 percent SBAguaranteed debenture; and a contribution from the Borrower of at least 10 percent equity.
In addition, the 504 Loan Program may be used to refinance debt under two options authorized under section 5027B and C of the Small Business Investment Act of 1958. First, if a 504
Project involves the expansion of the small business, any amount of existing indebtedness that does not exceed 50
percent of the project cost of the expansion may be refinanced and added to the projects cost Debt Refinancing with Expansion under the conditions set forth in section 5027B and the implementing regulations. See 13 CFR
120.882e and f. Second, debt refinancing is available for a 504 Project that does not involve the expansion of the small business under the requirements set forth in section 5027C and 13 CFR 120.882g Debt Refinancing without Expansion.
Section 328a of the Economic Aid to Hard-Hit Small Businesses, Nonprofits, and Venues Act Economic Aid Act,
E:FRFM29JYR1.SGM

29JYR1