Voglio sapere a riguardo di…

38905

Rules and Regulations
Federal Register Vol. 86, No. 139
Friday, July 23, 2021

This section of the FEDERAL REGISTER
contains regulatory documents having general applicability and legal effect, most of which are keyed to and codified in the Code of Federal Regulations, which is published under 50 titles pursuant to 44 U.S.C. 1510.
The Code of Federal Regulations is sold by the Superintendent of Documents.

NUCLEAR REGULATORY
COMMISSION
10 CFR Part 50
NRC20200253

Advanced Manufacturing Technologies Subtask 2A
Nuclear Regulatory Commission.
ACTION: Final report; issuance.
AGENCY:

The U.S. Nuclear Regulatory Commission NRC is issuing the final document entitled, Implementation of Quality Assurance Criteria and 10 CFR
50.59 for Nuclear Power Plant Components Produced Using Advanced Manufacturing Technologies.
DATES: This final report is available on July 23, 2021.
ADDRESSES: Please refer to Docket ID
NRC20200253 when contacting the NRC about the availability of information regarding this document.
You may obtain publicly available information related to this document using any of the following methods:
Federal Rulemaking Website: Go to https www.regulations.gov and search for Docket ID NRC20200253. Address questions about Docket IDs in Regulations.gov to Stacy Schumann;
telephone: 3014150624; email:
Stacy.Schumann@nrc.gov. For technical questions, contact the individual listed in the FOR FURTHER INFORMATION
CONTACT section of this document.
NRCs Agencywide Documents Access and Management System ADAMS: You may obtain publicly available documents online in the ADAMS Public Documents collection at https www.nrc.gov/reading-rm/
adams.html. To begin the search, select Begin Web-based ADAMS Search. For problems with ADAMS, please contact the NRCs Public Document Room PDR
reference staff at 18003974209, 301
4154737, or by email to pdr.resource@
nrc.gov. The final document, Implementation of Quality Assurance
khammond on DSKJM1Z7X2PROD with RULES

SUMMARY:

VerDate Sep<11>2014

15:54 Jul 22, 2021

Jkt 253001

Criteria and 10 CFR 50.59 for Nuclear Power Plant Components Produced Using Advanced Manufacturing Technologies, is available in ADAMS
under Accession No. ML21155A043.
Attention: The PDR, where you may examine and order copies of public documents, is currently closed. You may submit your request to the PDR via email at pdr.resource@nrc.gov or call 18003974209 or 3014154737, between 8:00 a.m. and 4:00 p.m. ET, Monday through Friday, except Federal holidays.
FOR FURTHER INFORMATION CONTACT:
Isaac Anchondo-Lopez, Office of Nuclear Reactor Regulation, U.S.
Nuclear Regulatory Commission, Washington, DC 205550001; telephone:
8172001152; email: Isaac.AnchondoLopez@nrc.gov.
SUPPLEMENTARY INFORMATION:
I. Background The NRC considers Advanced Manufacturing Technologies AMTs to consist of material processing and component fabrication methods that have not been traditionally used in the U.S. nuclear industry and have not yet received NRC approval through NRCendorsed codes and standards or the approval of an industry submittal. There are several regulatory paths available to a licensee for utilizing an AMT in a nuclear application, including: 1
Development of a code or standard that can be incorporated by reference in 50.55a of chapter I of title 10 of the Code of Federal Regulations 10 CFR;
2 selection of an unregulated in service application; 3 submission of generic technical reports or plant-specific submittals for NRC approval; or 4
implementation of the 10 CFR 50.59, Changes, tests and experiments, 10
CFR 70.72, Facility changes and change process, or 10 CFR 72.48, Changes, tests, and experiments processes. The document addresses the processes, consistent with the QA
requirements in appendix B to 10 CFR
part 50 and in accordance with 10 CFR
50.59, in order to support the staffs performance of potential inspections of a licensees implementation of these requirements for AMT-fabricated components.
II. Congressional Review Act This action is a rule as defined in the Congressional Review Act 5

PO 00000

Frm 00001

Fmt 4700

Sfmt 4700

U.S.C. 801808. However, the Office of Management and Budget has not found it to be a major rule as defined in the Congressional Review Act.
III. Implementation The staff has added Appendix A, Disposition of Public Comments, to the final document to inform the reader how public comments were dispositioned. The Division of New and Renewed Licenses of the Office of Nuclear Reactor Regulation will transmit the final version of the document ADAMS Accession Number ML21155A043 to each of the NRC
Regional Offices via a memo to be issued concurrently with publication of this Federal Register notification.
Dated: July 19, 2021.
For the Nuclear Regulatory Commission.
Anna H. Bradford, Director, Division of New and Renewed Licenses, Office of Nuclear Reactor Regulation.
FR Doc. 202115658 Filed 72221; 8:45 am BILLING CODE 759001P

FEDERAL RESERVE SYSTEM
12 CFR Part 204
Docket No. R1753
RIN 7100AG17

Regulation D: Reserve Requirements of Depository Institutions Board of Governors of the Federal Reserve System.
ACTION: Final rule.
AGENCY:

The Board of Governors of the Federal Reserve System Board is amending Regulation D, Reserve Requirements of Depository Institutions to revise the rate of interest paid on balances maintained to satisfy reserve balance requirements IORR and the rate of interest paid on excess balances IOER maintained at Federal Reserve Banks by or on behalf of eligible institutions. The final amendments specify that IORR is 0.15 percent and IOER is 0.15 percent, a 0.05 percentage point increase from their prior levels.
The amendments are intended to enhance the role of IORR and IOER in maintaining the Federal funds rate in the target range established by the Federal Open Market Committee FOMC or Committee.

SUMMARY:

E:FRFM23JYR1.SGM

23JYR1