Voglio sapere a riguardo di…

Federal Register / Vol. 86, No. 125 / Friday, July 2, 2021 / Notices Dated: June 25, 2021.
James Maeder, Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations.

lotter on DSK11XQN23PROD with NOTICES1

Appendix IScope of the Investigation The merchandise covered by the scope of this investigation is seamless carbon and alloy steel other than stainless steel pipes and redraw hollows, less than or equal to 16
inches 406.4 mm in nominal outside diameter, regardless of wall-thickness, manufacturing process e.g., hot-finished or cold-drawn, end finish e.g., plain end, beveled end, upset end, threaded, or threaded and coupled, or surface finish e.g., bare, lacquered or coated. Redraw hollows are any unfinished carbon or alloy steel other than stainless steel pipe or hollow profiles suitable for cold finishing operations, such as cold drawing, to meet the American Society for Testing and Materials ASTM or American Petroleum Institute API specifications referenced below, or comparable specifications. Specifically included within the scope are seamless carbon and alloy steel other than stainless steel standard, line, and pressure pipes produced to the ASTM A53, ASTM A106, ASTM A333, ASTM A334, ASTM A589, ASTM A795, ASTM A1024, and the API
51 specifications, or comparable specifications, and meeting the physical parameters described above, regardless of application, with the exception of the exclusions discussed below.
Specifically excluded from the scope of the investigation are: 1 All pipes meeting aerospace, hydraulic, and bearing tubing specifications, including pipe produced to the ASTM A822 standard; 2 all pipes meeting the chemical requirements of ASTM
A335, whether finished or unfinished; and 3 unattached couplings. Also excluded from the scope of the investigation are 1 all mechanical, boiler, condenser and heat exchange tubing, except when such products conform to the dimensional requirements, i.e., outside diameter and wall thickness, of ASTM A53, ASTM A106 or API 51
specifications. Also excluded from the scope of the investigation are: 1 Oil country tubular goods consisting of drill pipe, casing, tubing and coupling stock; 2 all pipes meeting the chemical requirements of ASTM
A335 regardless of their conformity to the dimensional requirements of ASTM A53, ASTM A106 or API 5L; and 3 the exclusion for ASTM A335 applies to pipes meeting the comparable specifications GOST
55075.
Subject seamless standard, line, and pressure pipe are normally entered under Harmonized Tariff Schedule of the United States HTSUS subheadings 7304.19.1020, 7304.19.1030, 7304.19.1045, 7304.19.1060, 7304.19.5020, 7304.19.5050, 7304.31.6050, 7304.39.0016, 7304.39.0020, 7304.39.0024, 7304.39.0028, 7304.39.0032, 7304.39.0036, 7304.39.0040, 7304.39.0044, 7304.39.0048, 7304.39.0052, 7304.39.0056, 7304.39.0062, 7304.39.0068, 7304.39.0072, 7304.51.5005, 7304.51.5060, 7304.59.6000, 7304.59.8010, 7304.59.8015, 7304.59.8020, 7304.59.8025, 7304.59.8030, 7304.59.8035, 7304.59.8040, 7304.59.8045, 7304.59.8050, 7304.59.8055,
VerDate Sep<11>2014

17:12 Jul 01, 2021

Jkt 253001

7304.59.8060, 7304.59.8065, and 7304.59.8070. The HTSUS subheadings and specifications are provided for convenience and customs purposes; the written description of the scope is dispositive.

Appendix IIList of Topics Discussed in the Issues and Decision Memorandum I. Summary II. Background III. Period of Investigation IV. Changes Since the Preliminary Determination V. Discussion of the Issues Comment 1: Rejection of Minor Corrections Regarding Product Coding Comment 2: Whether Application of Adverse Facts Available AFA for Unreported Downstream Sales Was Warranted Comment 3: AFA Selection Methodology VI. Recommendation FR Doc. 202114140 Filed 7121; 8:45 am BILLING CODE 3510DSP

DEPARTMENT OF COMMERCE
International Trade Administration Agency Information Collection Activities; Submission to the Office of Management and Budget OMB for Review and Approval; Comment Request; Collection Title: Survey of International Air Travelers SIAT
The Department of Commerce will submit the following information collection request to the Office of Management and Budget OMB for review and clearance in accordance with the Paperwork Reduction Act of 1995, on or after the date of publication of this notice. We invite the general public and other Federal agencies to comment on proposed, and continuing information collections, which helps us assess the impact of our information collection requirements and minimize the publics reporting burden. Public comments were previously requested via the Federal Register on March 18, 2021 during a 60-day comment period.
This notice allows for an additional 30
days for public comments.
Agency: International Trade Administration, Department of Commerce.
Title: Survey of International Air Travelers SIAT.
OMB Control Number: 06250227.
Form Numbers: None.
Type of Request: Regular submission.
Number of Respondents: 300,000.
Average Hours per Response: 15
minutes.
Burden Hours: 75,000.
Needs and Uses: The Survey of International Air Travelers SIAT

PO 00000

Frm 00013

Fmt 4703

Sfmt 4703

35271

program, administered by the National Travel and Tourism Office NTTO of the International Trade Administration provides source data required to: 1
Estimate international travel and passenger fare exports, imports, and the trade balance for the United States, 2
comply with the U.S. Travel Promotion Act of 2009 Pub. L. 111145, collect, analyze, and report information to the Corporation for Travel Promotion CTP, and support U.S. exports, 3 comply with the 1945, 1961, 1981, and 1996
travel and tourism related acts to collect and publish comprehensive international travel and tourism statistics and other marketing information, and 4 support the continuation of the Travel & Tourism Satellite Accounts for the United States, which provide the only spending and employment figures for the industry.
The SIAT program contains the core data that is analyzed and communicated by NTTO with other government agencies, associations and businesses that share the same objective of increasing U.S. international travel exports. The SIAT assists NTTO in assessing the economic impact of international travel on state and local economies, providing visitation estimates, key market intelligence, and identifying traveler and trip characteristics. The U.S. Department of Commerce assists travel industry enterprises to increase international travel and passenger fare exports for the country as well as outbound travel on U.S. carriers. The Survey program provides the only available estimates of nonresident visitation to the states and cities within the United States, as well as U.S. resident travel abroad. The SIAT
also assists NTTO in producing in-depth statistical reports, fact sheets and briefings on economic factors and policy issues affecting U.S. industries. With the SIAT statistical data not replicable by private sector trade associations or by private firms, Federal agencies, Congress and international organizations rely on these statisticbased tools, as do American businesses, state and local governments, and news organizations.
Affected Public: Individuals or households; International air travelers departing the United States, 18 years or older which includes U.S. and non-U.S.
residents from all countries.
Frequency: Monthly.
Respondents Obligation: Voluntary.
Legal Authority: U.S. Travel Promotion Act of 2009 Pub. L. 111
145.
This information collection request may be viewed at www.reginfo.gov.
Follow the instructions to view the
E:FRFM02JYN1.SGM

02JYN1