Voglio sapere a riguardo di…

34918

Federal Register / Vol. 86, No. 124 / Thursday, July 1, 2021 / Rules and Regulations DOCUMENTS RELATED TO U.S. ABWR DESIGN CERTIFICATION RENEWAL RULEContinued ADAMS Accession No./
Federal Register citation
Document GE-Hitachi Nuclear EnergyU.S. Advanced Boiling Water Design Certification Renewal Application, July 20, 2012 ..
Reactor Regulatory History on Design Certification Rules, April 26, 2000 5
Notice of Issuance of Revised Final Design Approval for U.S. ABWR Standard Design, December 1, 1994
Letter to GE Nuclear Energy Transmitting the Revised Final Design Approval for the U.S. ABWR Standard Design, November 23, 1994.
Issuance of Final Design Approval Pursuant to 10 CFR Part 52, Appendix O; U.S. Advanced Boiling Water Reactor Design; GE Nuclear Energy, July 20, 1994.
Final Design Approval FDA0 for GE Nuclear Energy U.S. ABWR Standard Design, July 13, 1994 Docket No. 52
001.
GE Nuclear Energy; Receipt of Application for Design Certification, March 20, 1992 Initial Application

The NRC may post materials related to this document, including public comments, on the Federal Rulemaking website at https www.regulations.gov under Docket ID NRC20170090.
XVII. Procedures for Access to Proprietary and Safeguards Information for Preparation of Comments on the U.S. ABWR Design Certification Renewal Rule This section contains instructions regarding how the non-publicly available documents related to this final rule, and specifically those listed in Tables 1.61 and 1.62 beginning on page 1.62 of Tier 2 of the DCD, may be accessed by interested persons who wish to comment on the design certification. These documents contain proprietary information and SGI.
Requirements for access to SGI are primarily set forth in 10 CFR parts 2 and 73. This section provides information specific to this final rule; however, nothing in this section is intended to conflict with the SGI regulations.
Interested persons who desire access to proprietary information on the U.S.
ABWR design should first request access to that information from GEH, the design certification applicant. A request for access should be submitted to the NRC if the applicant does not either grant or deny access by the 10-day deadline described in the following section.

khammond on DSKJM1Z7X2PROD with RULES

Submitting a Request to the NRC for Access Within 10 days after publication of this direct final rule, any individual or entity who believes access to 5 The regulatory history of the NRCs design certification reviews is a package of documents that is available in the NRCs PDR and NRC Library:
Reactor Regulatory History on Design Certification Rules, April 26, 2000. This history spans the period during which the NRC simultaneously developed the regulatory standards for reviewing these designs and the form and content of the rules that certified the designs. This document predates this rulemaking and therefore does not contain a regulatory history for this rulemaking.

VerDate Sep<11>2014

15:54 Jun 30, 2021

Jkt 253001

proprietary information or SGI is necessary in order to submit comments on this U.S. ABWR DC renewal rule may request access to such information.
Requests for access to proprietary information or SGI submitted more than 10 days after publication of this document will not be considered absent a showing of good cause for the late filing explaining why the request could not have been filed earlier.
The requestor shall submit a letter requesting permission to access proprietary information and/or SGI to the Office of the Secretary, U.S. Nuclear Regulatory Commission, Attention:
Rulemakings and Adjudications Staff, Washington, DC 205550001. The expedited delivery or courier mail address is: Office of the Secretary, U.S.
Nuclear Regulatory Commission, Attention: Rulemakings and Adjudications Staff, 11555 Rockville Pike, Rockville, Maryland 20852. The email address for the Office of the Secretary is Rulemaking.Comments@
nrc.gov. The requester must send a copy of the request to the DC applicant at the same time as the original transmission to the NRC using the same method of transmission. Requests to the applicant must be sent to Michelle Catts, Senior Vice President, Regulatory Affairs, General Electric-Hitachi Nuclear Energy Americas, LLC, 3901 Castle Hayne Road, P.O. Box 780, M/C A10, Wilmington, NC 28402.
The request must include the following information:
1. The name of this design certification, U.S. ABWR design certification; the rulemaking identification number, RIN 3150AK04;
the rulemaking docket number, NRC
20170090; and the Federal Register citation for this rule.
2. The name, address, and email or FAX number of the requester.
3. If the requester is an entity, the name of the individuals to whom access is to be provided, including the identity of any expert, consultant, or
PO 00000

Frm 00014

Fmt 4700

Sfmt 4700

ML12125A385
ML003761550
59 FR 61647
ML20077A747
59 FR 37058
ML20070L506
57 FR 9749

assistant who will aid the requestor in evaluating the information.
4. If the request is for proprietary information, the requesters need for the information in order to prepare meaningful comments on the design certification must be demonstrated.
Each of the following areas must be addressed with specificity:
a. The specific issue or subject matter on which the requester wishes to comment;
b. An explanation why information that is publicly available is insufficient to provide the basis for developing meaningful comment on the U.S. ABWR
DC renewal rule with respect to the issue or subject matter described in paragraph 4.a. of this section; and c. The technical competence demonstrable knowledge, skill, training or education of the requestor to effectively utilize the requested proprietary information to provide the basis for meaningful comment.
Technical competence may be shown by reliance on a qualified expert, consultant, or assistant who satisfies these criteria.
d. A chronology and discussion of the requesters attempts to obtain the information from the design certification applicant, and the final communication from the requester to the applicant and the applicants response, if any was provided, with respect to the request for access to proprietary information must be submitted.
5. If the request is for SGI, the request must include the following:
a. A statement that explains each individuals need to know the SGI, as required by 73.2 and 73.22b1.
Consistent with the definition of need to know as stated in 73.2, Definitions, the statement must explain:
i. The specific issue or subject matter on which the requester wishes to comment;
ii. An explanation of why publicly available information is insufficient to
E:FRFM01JYR1.SGM

01JYR1