Federal Register - June 23, 2021
Versione di testo Cosa è?Dateas è un sito indipendente non affiliato a entità governative. La fonte dei documenti PDF che pubblichiamo qui è l'entità governativa indicata in ciascuno di essi. Le versioni in testo sono trascrizioni che realizziamo per facilitare l'accesso e la ricerca di informazioni, ma possono contenere errori o non essere complete.
Source: Federal Register
33072
Federal Register / Vol. 86, No. 118 / Wednesday, June 23, 2021 / Rules and Regulations
jbell on DSKJLSW7X2PROD with RULES2
iii F2194 Standard Consumer Safety Specification for Bassinets and Cradles;
iv F2906 Standard Consumer Safety Specification for Bedside Sleepers;
v F2933 Standard Consumer Safety Specification for Crib Mattresses.
7 Instead of complying with section 2.2 of ASTM F311817a, comply with the following:
i 16 CFR 1218Safety Standard for Bassinets and Cradles;
ii 16 CFR 1219Safety Standard for Full-Size Baby Cribs;
iii 16 CFR 1220Safety Standard for Non-Full-Size Baby Cribs;
iv 16 CFR 1221Safety Standard for Play Yards;
v 16 CFR 1222Safety Standard for Bedside Sleepers.
8 Do not comply with sections 2.3
and 2.4 of ASTM F311817a, including Figures 1 and 2.
9 Do not comply with sections 3.1.1
through 3.1.6 of ASTM F311817a.
10 Instead of complying with section 3.1.7 of ASTM F311817a, comply with the following:
i 3.1.7 infant sleep product, na product marketed or intended to provide a sleeping accommodation for an infant up to 5 months of age, and that is not subject to any of the following:
A 16 CFR part 1218Safety Standard for Bassinets and Cradles;
B 16 CFR part 1219Safety Standard for Full-Size Baby Cribs;
VerDate Sep<11>2014
17:56 Jun 22, 2021
Jkt 253001
C 16 CFR part 1220Safety Standard for Non-Full-Size Baby Cribs;
D 16 CFR part 1221 Safety Standard for Play Yards;
E 16 CFR part 1222Safety Standard for Bedside Sleepers.
ii Reserved 11 Do not comply with sections 3.1.7.1 through 3.1.13 of ASTM F3118
17a.
12 Do not comply with section 3.1.15 through 3.1.16 of ASTM F3118
17a.
13 Do not comply with section 5 of ASTM F311817a.
14 Do not comply with sections 6.1
through 6.8 of ASTM F311817a.
15 Instead of complying with section 6.9 of ASTM F311817a, comply with the following:
i 6.9 Maximum Seat Back/Sleep Surface Angle:
ii 6.9.1 Infant Sleep ProductThe angle of the seat back/sleep surface intended for sleep along the occupants head to toe axis relative to the horizontal shall not exceed 10 degrees when tested in accordance with 7.11.2.
iii Do not comply with 6.9.2.
iv 6.9.3 Infant Sleep Productsshall meet, 16 CFR part 1218, Safety Standard for Bassinets and Cradles, including conforming to the definition of a bassinet/cradle.
16 Do not comply with sections 6.10
through 7.10 of ASTM F311817a.
PO 00000
Frm 00052
Fmt 4701
Sfmt 9990
17 Do not comply with section 7.11.1.3 of ASTM F311817a.
18 In section 7.11.2 of ASTM
F311817a, replace Infant Inclined Sleep Product and Infant Inclined Sleep Product Accessory with Infant Sleep Products.
19 Instead of complying with section 7.11.2.1 and 7.11.2.2 of ASTM F3118
17a, comply with the following:
i 7.11.2.1 If applicable, place the product in the manufacturers recommended highest seat back/sleep surface angle position intended for sleep.
ii 7.11.2.2 Place the hinged weight gageinfant in the product and position the gage with the hinge centered over the seat bight line and the upper plate of the gage on the seat back/sleep surface. Place a digital protractor on the upper torso/head area lengthwise.
20 Do not comply with sections 7.11.3 through 9, or the Appendix, of ASTM F311817a.
21 Add section 10.2 to ASTM
F311817a:
i 10.2 infant sleep product ii Reserved Alberta E. Mills, Secretary, Consumer Product Safety Commission.
FR Doc. 202112723 Filed 62221; 8:45 am BILLING CODE 635501P
E:FRFM23JNR2.SGM
23JNR2
