Voglio sapere a riguardo di…

khammond on DSKJM1Z7X2PROD with PROPOSALS

Federal Register / Vol. 86, No. 110 / Thursday, June 10, 2021 / Proposed Rules II. Introduction A. Authority B. Background 1. Current Standards 2. History of Standards Rulemakings for UFHWSTs III. General Discussion A. Product Classes and Scope of Coverage B. Test Procedure C. Technological Feasibility 1. General 2. Maximum Technologically Feasible Levels D. Energy Savings 1. Determination of Savings 2. Significance of Savings E. Economic Justification 1. Specific Criteria a. Economic Impact on Manufacturers and Consumers b. Savings in Operating Costs Compared to Increase in Price LCC and PBP
c. Energy Savings d. Lessening of Utility or Performance of Equipment e. Impact of Any Lessening of Competition f. Need for National Energy Conservation g. Other Factors IV. Methodology and Discussion of Related Comments A. Market and Technology Assessment 1. Scope of Coverage and Equipment Classes 2. Technology Options 3. Screening Analysis a. Screened-Out Technologies b. Remaining Technologies B. Engineering Analysis 1. Efficiency Levels for Analysis 2. Representative Equipment for Analysis 3. Cost Analysis C. Energy Use Analysis 1. Tank Thermal Loss Model a. Tank Surface Area Ai, j b. Tank Internal Water Temperature Ti c. Tank Ambient Temperature Tamb, z d. R-value of Insulation Ri, j 2. Annual Energy Use Due To UFHWST
Losses 3. Additional Sources of Uncertainty D. Life-Cycle Cost and Payback Period Analysis 1. Installation Costs 2. Annual Energy Consumption E. Shipments Analysis 1. Stock Estimates a. Residential Stock b. Commercial Stock c. Industrial Stock 2. Shipments for Replacement 3. Shipments for New Construction 4. Estimated Shipments a. Distribution of Shipments by UFHWST
Storage Volume 5. Additional Sources of Uncertainty F. National Impact Analysis 1. Energy Efficiency Distribution in the NoNew-Standards Case 2. Hot Water Supply Boiler Efficiency Trend G. Discussion of Other Comments Received V. Analytical Results and Conclusions A. National Impact Analysis 1. Significance of Energy Savings 2. Net Present Value of Consumer Costs and Benefits
VerDate Sep<11>2014

22:24 Jun 09, 2021

Jkt 253001

B. Proposed Determination 1. Technological Feasibility 2. Significant Conservation of Energy 3. Economic Justification 4. Summary VI. Procedural Issues and Regulatory Review A. Review Under Executive Order 12866
B. Review Under the Regulatory Flexibility Act C. Review Under the Paperwork Reduction Act D. Review Under the National Environmental Policy Act of 1969
E. Review Under Executive Order 13132
F. Review Under Executive Order 12988
G. Review Under the Unfunded Mandates Reform Act of 1995
H. Review Under the Treasury and General Government Appropriations Act, 1999
I. Review Under Executive Order 12630
J. Review Under the Treasury and General Government Appropriations Act, 2001
K. Review Under Executive Order 13211
L. Review Under the Information Quality Bulletin for Peer Review VII. Public Participation A. Participation in the Webinar D. Submission of Comments E. Issues on Which DOE Seeks Comment VIII. Approval of the Office of the Secretary
I. Synopsis of the Proposed Determination Title III, Part C 1 of EPCA,2 established the Energy Conservation Program for Certain Industrial Equipment. 42 U.S.C.
63116317 This equipment includes UFHWSTs, the subject of this NOPD.
42 U.S.C. 63111K
Pursuant to EPCA, DOE is triggered to consider amending the energy efficiency standards for certain types of commercial and industrial equipment, including the equipment at issue in this document, whenever the American Society of Heating, Refrigerating, and Air-Conditioning Engineers ASHRAE
amends the standard levels or design requirements prescribed in ASHRAE
Standard 90.1, Energy Standard for Buildings Except Low-Rise Residential Buildings, ASHRAE Standard 90.1.
Under a separate provision of EPCA, DOE is required to review the existing energy conservation standards for those types of covered equipment subject to ASHRAE Standard 90.1 every six 6
years to determine whether those standards need to be amended. 42
U.S.C. 6313a6AC DOE is conducting this review of the energy conservation standards for UFHWSTs under EPCAs six-year-lookback authority. 42 U.S.C. 6313a6C
For this proposed determination, DOE
analyzed UFHWSTs subject to standards as specified in the Code of Federal 1 For editorial reasons, upon codification in the U.S. Code, Part C was redesignated Part A1.
2 All references to EPCA in this document refer to the statute as amended through the Energy Act of 2020, Public Law 116260 Dec. 27, 2020.

PO 00000

Frm 00003

Fmt 4702

Sfmt 4702

30797

Regulations CFR at 10 CFR 431.110.
DOE first analyzed the technological feasibility of more efficient UFHWSTs.
For those UFHWSTs for which DOE
determined higher standards to be technologically feasible, DOE estimated energy savings that would result from potential amended energy conservation standards. DOE also considered whether potential energy conservation standards would be economically justified. As discussed in the following sections, DOE has initially determined that it lacks clear and convincing evidence that amended energy conservation standards for UFHWSTs would result in significant additional conservation of energy or be economically justified.
Based on the results of these analyses, summarized in section V of this document, DOE has tentatively determined that current energy conservation standards for UFHWSTs do not need to be amended.
II. Introduction The following section briefly discusses the statutory authority underlying this proposed determination, as well as some of the historical background relevant to the establishment of energy conservation standards for UFHWSTs.
A. Authority EPCA, Public Law 94163 42 U.S.C.
62916317, as codified, among other things, authorizes DOE to regulate the energy efficiency of a number of consumer products and certain industrial equipment. Title III, Part C of EPCA, added by Public Law 95619, Title IV, 441a 42 U.S.C. 63116317, as codified, established the Energy Conservation Program for Certain Industrial Equipment, which sets forth a variety of provisions designed to improve energy efficiency. This equipment includes UFHWSTs, the subject of this document. 42 U.S.C.
63111K
Under EPCA, the energy conservation program consists essentially of four parts: 1 Testing; 2 labeling; 3 the establishment of Federal energy conservation standards, and 4
certification and enforcement procedures. Relevant provisions of EPCA specifically include definitions 42 U.S.C. 6311, energy conservation standards 42 U.S.C. 6313, test procedures 42 U.S.C. 6314, labeling provisions 42 U.S.C. 6315, and the authority to require information and reports from manufacturers 42 U.S.C.
6316.
Federal energy conservation requirements for covered equipment established under EPCA generally
E:FRFM10JNP1.SGM

10JNP1