Voglio sapere a riguardo di…

Federal Register / Vol. 86, No. 93 / Monday, May 17, 2021 / Rules and Regulations investigative techniques, procedures, or evidence.
x From subsection f because CIGIEs rules are inapplicable to those portions of the system that are exempt and would place the burden on CIGIE of either confirming or denying the existence of a record pertaining to a requesting individual, which might in itself provide an answer to that individual relating to an ongoing investigation. The conduct of a successful investigation leading to the indictment of a criminal offender precludes the applicability of established agency rules relating to verification of record, disclosure of the record to that individual, and record amendment procedures for this record system.
xi From subsection g to the extent that this system is exempt from the access and amendment provisions of subsection d pursuant to subsections j2, k1, and k2 of the Privacy Act.
Dated: May 12, 2021.
Allison C. Lerner, Chairperson of the Council of the Inspectors General on Integrity and Efficiency.
FR Doc. 202110375 Filed 51321; 4:15 pm BILLING CODE 6820C9P

NUCLEAR REGULATORY
COMMISSION
10 CFR Part 72
NRC20200274
RIN 3150AK57

List of Approved Spent Fuel Storage Casks: TN Americas LLC Standardized NUHOMS Horizontal Modular Storage System, Certificate of Compliance No.
1004, Renewed Amendment No. 17
Nuclear Regulatory Commission.
ACTION: Direct final rule; confirmation of effective date.
AGENCY:

The U.S. Nuclear Regulatory Commission NRC is confirming the effective date of June 7, 2021, for the direct final rule that was published in the Federal Register on March 24, 2021.
This direct final rule amended the TN
Americas LLC Standardized NUHOMS
Horizontal Modular Storage System listing in the List of approved spent fuel storage casks to include Renewed Amendment No. 17 to Certificate of Compliance No. 1004. Renewed Amendment No. 17 revises the certificate of compliance technical specifications to add Heat Load Zoning Configurations 1113 for the 61BTH

khammond on DSKJM1Z7X2PROD with RULES9

SUMMARY:

VerDate Sep<11>2014

21:39 May 14, 2021

Jkt 253001

Type 2 dry shielded canister and change the maximum assembly heat load from 1.2kW to 1.7kW.
DATES: The effective date of June 7, 2021, for the direct final rule published March 24, 2021 86 FR 15563, is confirmed.
Please refer to Docket ID
NRC20200274 when contacting the NRC about the availability of information for this action. You may obtain publicly-available information related to this action by any of the following methods:
Federal Rulemaking Website: Go to https www.regulations.gov and search for Docket ID NRC20200274. Address questions about NRC dockets to Dawn Forder; telephone: 3014153407;
email: Dawn.Forder@nrc.gov. For technical questions, contact the individuals listed in the FOR FURTHER
INFORMATION CONTACT section of this document.
NRCs Agencywide Documents Access and Management System ADAMS: You may obtain publiclyavailable documents online in the ADAMS Public Documents collection at https www.nrc.gov/reading-rm/
adams.html. To begin the search, select Begin Web-based ADAMS Search. For problems with ADAMS, please contact the NRCs Public Document Room PDR
reference staff at 18003974209, 301
4154737, or by email to pdr.resource@
nrc.gov. The proposed amendment to the certificate of compliance, the proposed changes to the technical specifications, and the preliminary safety evaluation report are available in ADAMS under Accession No.
ML20308A485. The final amendment to the certificate of compliance, final changes to the technical specifications, and final safety evaluation report can also be viewed in ADAMS under Accession No. ML21109A325.
Attention: The PDR, where you may examine and order copies of public documents, is currently closed. You may submit your request to the PDR via email at pdr.resource@nrc.gov or call 1
8003974209 between 8:00 a.m. and 4:00 p.m. EST, Monday through Friday, except Federal holidays.
FOR FURTHER INFORMATION CONTACT:
Alexa Sieracki, Office of Nuclear Material Safety and Safeguards, U.S.
Nuclear Regulatory Commission, Washington, DC 205550001; telephone:
3014157509; email: Alexa.Sieracki@
nrc.gov.
ADDRESSES:

On March 24, 2021 86 FR 15563, the NRC
published a direct final rule amending its regulations in part 72 of title 10 of
SUPPLEMENTARY INFORMATION:

PO 00000

Frm 00003

Fmt 4700

Sfmt 4700

26651

the Code of Federal Regulations to revise the TN Americas LLC
Standardized NUHOMS Horizontal Modular Storage System listing within the List of approved spent fuel storage casks to include Renewed Amendment No. 17 to Certificate of Compliance No.
1004. Renewed Amendment No. 17
revises the certificate of compliance technical specifications to 1 add Heat Load Zoning Configurations 1113 for the 61BTH Type 2 dry shielded canister and 2 change the maximum assembly heat load from 1.2kW to 1.7kW. This amendment also makes minor clarifications to the certificate of compliance.
In the direct final rule, the NRC stated that if no significant adverse comments were received, the direct final rule would become effective on June 7, 2021.
The NRC did not receive any comments on the direct final rule. Therefore, this direct final rule will become effective as scheduled.
Dated: May 11, 2021
For the Nuclear Regulatory Commission.
Cindy K. Bladey, Chief, Regulatory Analysis and Rulemaking Support Branch, Division of Rulemaking, Environmental, and Financial Support, Office of Nuclear Material Safety and Safeguards.
FR Doc. 202110281 Filed 51421; 8:45 am BILLING CODE 759001P

DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration 14 CFR Part 39
Docket No. FAA20201038; Project Identifier MCAI202000569E; Amendment 3921496; AD 20210802
RIN 2120AA64

Airworthiness Directives; Safran Helicopter Engines, S.A. Type Certificate Previously Held by Turbomeca, S.A. Turboshaft Engines Federal Aviation Administration FAA, DOT.
ACTION: Final rule.
AGENCY:

The FAA is adopting a new airworthiness directive AD for all Safran Helicopter Engines, S.A. Safran Arriel 2D and Arriel 2E model turboshaft engines. This AD was prompted by the manufacturer revising the maintenance and overhaul manuals to introduce new or more restrictive airworthiness limitations and maintenance tasks. This AD requires the replacement of certain critical parts before reaching their published inservice life limits, performing scheduled
SUMMARY:

U:17MYR1.SGM

17MYR1