Voglio sapere a riguardo di…

khammond on DSKJM1Z7X2PROD with NOTICES

9486

Federal Register / Vol. 86, No. 29 / Tuesday, February 16, 2021 / Notices
All wood mouldings and millwork products are included within the scope even if they are trimmed; cut-to-size; notched;
punched; drilled; or have undergone other forms of minor processing.
Subject merchandise also includes wood mouldings and millwork products that have been further processed in a third country, including but not limited to trimming, cutting, notching, punching, drilling, coating, or any other processing that would not otherwise remove the merchandise from the scope of this order if performed in the country of manufacture of the in-scope product.
Excluded from the scope of this order are countertop/butcherblocks imported as a full countertop/butcherblock panel, exterior fencing, exterior decking and exterior siding products including solid wood siding, nonwood siding e.g., composite or cement, and shingles that are not LVL or finger jointed;
finished and unfinished doors; flooring; parts of stair steps including newel posts, balusters, easing, gooseneck, risers, treads, rail fittings and stair stringers; picture frame components three feet and under in individual lengths; and lumber whether solid, finger-jointed, or edge-glued. To be excluded from the scope, finger-jointed or edge-glued lumber must have a nominal thickness of 1.5 inches or greater and a certification stamp from an American Lumber Standard Committee-certified grading agency. The exclusion for lumber whether solid, finger-jointed, or edge-glued does not apply to screen/surfaced on 4
sides S4S and/or surface 1 side, 2 edges SlS2E stock also called boards that are finger-jointed and/or edge-glued, or to fingerjointed and/or edge-glued moulding or millwork blanks whether or not resawn.
Accordingly, S4S and S1S2E stock/boards that are not finger-jointed or edge-glued are excluded from the scope of this order.
Excluded from the scope of this order are all products covered by the scope of the countervailing duty order on Hardwood Plywood from the Peoples Republic of China.
See Certain Hardwood Plywood Products from the Peoples Republic of China:
Countervailing Duty Order, 83 FR 513
January 4, 2018.
Excluded from the scope of this order are all products covered by the scope of the countervailing duty order on Multilayered Wood Flooring from the Peoples Republic of China. See Multilayered Wood Flooring from the Peoples Republic of China:
Countervailing Duty Order, 76 FR 76693
December 8, 2011.
Excluded from the scope of this order are all products covered by the scope of the countervailing duty order on Wooden Cabinets and Vanities from the Peoples Republic of China. See Wooden Cabinets and Vanities and Components Thereof from the Peoples Republic of China: Countervailing Duty Order, 85 FR 22134 April 21, 2020.
Imports of wood mouldings and millwork products are primarily entered under the following Harmonized Tariff Schedule of the United States HTSUS numbers:
4409.10.4010, 4409.10.4090, 4409.10.4500, 4409.10.5000, 4409.22.4000, 4409.22.5000,4409.29.4100, and
VerDate Sep<11>2014

17:04 Feb 12, 2021

Jkt 253001

4409.29.5100. Imports of wood mouldings and millwork products may also enter under HTSUS numbers:
4409.10.6000,4409.10.6500, 4409.22.6000, 4409.22.6500, 4409.29.6100, 4409.29.6600, 4418.20.4000, 4418.20.8030, 4418.20.8060, 4418.99.9095 and 4421.99.9780. While the HTSUS subheadings are provided for convenience and customs purposes, the written description of the scope of the order is dispositive.
FR Doc. 202103150 Filed 21221; 8:45 am BILLING CODE 3510DSP

DEPARTMENT OF COMMERCE
International Trade Administration A570117

Wood Mouldings and Millwork Products From the Peoples Republic of China: Amended Final Antidumping Duty Determination and Antidumping Duty Order Enforcement and Compliance, International Trade Administration, Department of Commerce.
SUMMARY: Based on affirmative final determinations by the Department of Commerce Commerce and the International Trade Commission ITC, Commerce is issuing an antidumping duty order on wood mouldings and millwork products millwork products from the Peoples Republic of China China. In addition, Commerce is amending its final affirmative determination.
AGENCY:

DATES:

Applicable February 16, 2021.

FOR FURTHER INFORMATION CONTACT:

Brian Smith or Samuel Glickstein, AD/
CVD Operations, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone:
202 4821766 or 202 4825307, respectively.
SUPPLEMENTARY INFORMATION:

Final Determination section of this notice for further discussion. On February 10, 2021, the ITC notified Commerce of its final determination, pursuant to section 735d of the Tariff Act of 1930, as amended the Act, that an industry in the United States is materially injured within the meaning of section 735b1Ai of the Act by reason of LTFV imports of millwork products from China.3
Scope of the Order The products covered by this order are millwork products from China. For a complete description of the scope of this order, see the appendix to this notice.
Amendment to Final Determination A ministerial error is defined as an error in addition, subtraction, or other arithmetic function, clerical error resulting from inaccurate copying, duplication, or the like, and any other similar type of unintentional error which the Secretary considers ministerial.4 Pursuant to section 735e of the Act and 19 CFR 351.224e and f, Commerce is amending the Final Determination to reflect the correction of a ministerial error in the final estimated weighted-average dumping margin calculated for Fujian Yinfeng Imp & Exp Trading Co., Ltd./Fujian Province Youxi City Mangrove Wood Machining Co., Ltd. Yinfeng/
Mangrove.5 In addition, because Yinfeng/Mangroves estimated weighted-average dumping margin is the basis for the estimated weightedaverage dumping margins for 42 nonselected separate rate companies, and its highest transaction margin is the basis for the estimated weighted-average dumping margin determined for the China-wide entity, we are also revising the estimated weighted-average dumping margins for the separate rate companies and the China-wide entity rate in the Final Determination.6

Antidumping Duty Order On February 10, 2021, in accordance On January 4, 2021, Commerce with section 735d of the Act, the ITC
published its affirmative Final Determination in the less-than-fair-value notified Commerce of its final determination in this investigation, in LTFV investigation of millwork products from China.1 On January 5, 3 See ITC Notification Letter, Investigations, Inv.
2021, Commerce received a ministerial Nos. 701TA636 and 731TA1470 Final error allegation with respect to its Final February 10, 2021 ITC Notification Letter.
Determination.2 See the Amendment to 4 See section 735e of the Act; see also 19 CFR
Background
1 See
Wood Mouldings and Millwork Products from the Peoples Republic of China: Final Determination of Sales at Less Than Fair Value, 86
FR 63 January 4, 2021 Final Determination.
2 See Coalition of American Millwork Producers Letter, Wood Mouldings and Millwork Products from the Peoples Republic of China: Ministerial Error Comments, dated January 5, 2021.

PO 00000

Frm 00010

Fmt 4703

Sfmt 4703

351.224f.
5 See Memorandum, Final Determination of Sales at Less-Than-Fair-Value: Wood Mouldings and Millwork Products from the Peoples Republic of China: Ministerial Error Allegations, dated January 11, 2021 Ministerial Error Memorandum.
6 See infra, section on Estimated WeightedAverage Dumping Margins; see also Ministerial Error Memorandum.

E:FRFM16FEN1.SGM

16FEN1