Voglio sapere a riguardo di…

7530

Federal Register / Vol. 86, No. 18 / Friday, January 29, 2021 / Notices
merchandise exported to the United States by this respondent in any other producer/exporter combination or by third parties that sourced subject merchandise from the excluded producer/exporter combination.

Germany
Exporter/producer
Estimated weightedaverage dumping margin percent
Provisional Measures Section 733d of the Act states that suspension of liquidation pursuant to an affirmative preliminary determination may not remain in effect for more than four months, except where exporters representing a significant proportion of exports of the subject merchandise request that Commerce extend the fourmonth period to no more than six months. At the request of exporters that account for a significant proportion of forged steel fluid end blocks from Germany and Italy, Commerce extended the four-month period to six months in each of these investigations. Commerce published the preliminary determinations in these investigations on July 23, 2020.9
The extended provisional measures period, beginning on the date of publication of the preliminary determinations, ended on January 18, 2021. Therefore, in accordance with section 733d of the Act and our practice,10 Commerce will instruct CBP
to terminate the suspension of liquidation and to liquidate, without regard to antidumping duties, unliquidated entries of forged steel fluid end blocks from Germany and Italy entered, or withdrawn from warehouse, for consumption after January 18, 2021, the final day on which the provisional measures were in effect, until and through the day preceding the date of publication of the ITCs final affirmative injury determinations in the Federal Register. Suspension of liquidation and the collection of cash deposits will resume on the date of publication of the ITCs final determinations in the Federal Register.
Estimated Weighted-Average Dumping Margins
khammond on DSKJM1Z7X2PROD with NOTICES

The estimated weighted-average dumping margins are as follows:

9 See Germany Preliminary Determination and Italy Preliminary Determination.
10 See, e.g., Certain Corrosion-Resistant Steel Products from India, India, the Peoples Republic of China, the Republic of Korea and Taiwan:
Amended Final Affirmative Antidumping Determination for India and Taiwan, and Antidumping Duty Orders, 81 FR 48390, 48392
July 25, 2016.

VerDate Sep<11>2014

17:43 Jan 28, 2021

Jkt 253001

BGH Edelstahl Siegen GmbH
Schmiedewerke Groditz GmbH ..
voestalpine Bohler Group
All Others

4.79
78.36
78.36
4.79

Italy
Exporter/producer
Metalcam S.p.A
Lucchini Mame Forge S.p.A
IMER International S.p.A
Galperti Group
Mimest S.p.A
P. Technologies S.r.L
All Others

Estimated weightedaverage dumping margin percent 11 0.00

7.33
58.48
58.48
58.48
58.48
7.33

Notification to Interested Parties This notice constitutes the antidumping duty orders with respect to forged steel fluid end blocks from Germany and Italy pursuant to section 736a of the Act. Interested parties can find a list of antidumping duty orders currently in effect at http
enforcement.trade.gov/stats/
iastats1.html.
This amended final determination and antidumping duty orders are published in accordance with sections 735e and 736a of the Act and 19 CFR
351.224e and 19 CFR 351.211b.
Dated: January 25, 2021.
Christian Marsh, Acting Assistant Secretary for Enforcement and Compliance.

Appendix Scope of the Orders The products covered by these orders are forged steel fluid end blocks fluid end blocks, whether in finished or unfinished form, and which are typically used in the manufacture or service of hydraulic pumps.
The term forged is an industry term used to describe the grain texture of steel resulting from the application of localized compressive force. Illustrative forging standards include, but are not limited to, American Society for 11 After the final determination, Commerce directed CBP not to suspend liquidation of entries of subject merchandise produced and exported by Metalcam S.p.A. Subject merchandise from this producer/exporter combination is excluded from the antidumping duty order on Italy. See Continuation of Suspension of Liquidation section above.

PO 00000

Frm 00005

Fmt 4703

Sfmt 4703

Testing and Materials ASTM specifications A668 and A788.
For purposes of these orders, the term steel denotes metal containing the following chemical elements, by weight: i Iron greater than or equal to 60 percent; ii nickel less than or equal to 8.5 percent; iii copper less than or equal to 6 percent; iv chromium greater than or equal to 0.4
percent, but less than or equal to 20 percent;
and v molybdenum greater than or equal to 0.15 percent, but less than or equal to 3
percent. Illustrative steel standards include, but are not limited to, American Iron and Steel Institute AISI or Society of Automotive Engineers SAE grades 4130, 4135, 4140, 4320, 4330, 4340, 8630, 155, 174, F6NM, F22, F60, and XM25, as well as modified varieties of these grades.
The products covered by these orders are:
1 Cut-to-length fluid end blocks with an actual height measured from its highest point of 8 inches 203.2 mm to 40 inches 1,016.0 mm, an actual width measured from its widest point of 8 inches 203.2 mm to 40 inches 1,016.0 mm, and an actual length measured from its longest point of 11
inches 279.4 mm to 75 inches 1,905.0 mm;
and 2 strings of fluid end blocks with an actual height measured from its highest point of 8 inches 203.2 mm to 40 inches 1,016.0 mm, an actual width measured from its widest point of 8 inches 203.2 mm to 40 inches 1,016.0 mm, and an actual length measured from its longest point up to 360 inches 9,144.0 mm.
The products included in the scope of these orders have a tensile strength of at least 70 KSI measured in accordance with ASTM
A370 and a hardness of at least 140 HBW
measured in accordance with ASTM E10.
A fluid end block may be imported in finished condition i.e., ready for incorporation into a pump fluid end assembly without further finishing operations or unfinished condition i.e., forged but still requiring one or more finishing operations before it is ready for incorporation into a pump fluid end assembly. Such finishing operations may include: 1 Heat treating; 2 milling one or more flat surfaces; 3 contour machining to custom shapes or dimensions; 4 drilling or boring holes; 5 threading holes; and/or 6
painting, varnishing, or coating.
Excluded from the scope of these orders are fluid end block assemblies which 1
include a plungers and related housings, adapters, gaskets, seals, and packing nuts, b valves and related seats, springs, seals, and cover nuts, and c a discharge flange and related seals, and 2 are otherwise ready to be mated with the power end of a hydraulic pump without the need for installation of any plunger, valve, or discharge flange components, or any other further manufacturing operations.
The products included in the scope of these orders may enter under Harmonized Tariff Schedule of the United States HTSUS
subheadings 7218.91.0030, 7218.99.0030, 7224.90.0015, 7224.90.0045, 7326.19.0010, 7326.90.8688, or 8413.91.9055. While these HTSUS subheadings are provided for convenience and customs purposes, the
E:FRFM29JAN1.SGM

29JAN1