Voglio sapere a riguardo di…

Federal Register / Vol. 86, No. 13 / Friday, January 22, 2021 / Notices disclosed under APO in accordance with 19 CFR 351.305a3, which continues to govern business proprietary information in this segment of the proceeding. Timely written notification of return or destruction of APO materials or conversion to judicial Final ad valorem protective order is hereby requested.
Company rate Failure to comply with the regulations percent and the terms of an APO is a Activa International Inc
242.15 sanctionable violation.
Changzou Tenglong Auto Parts Notification to Interested Parties Co. Ltd
16.08
We are issuing and publishing these CRRC Changzhou Auto Parts Co. Ltd
242.15 results in accordance with sections Dongguan Aoda Aluminum Co.
751a1 and 777i1 of the Act.

Final Results of Administrative Review In accordance with 19 CFR
351.221b5, we determine the following final net subsidy rates for the 2018 administrative review: 5

Ltd
Guangdong Xingfa Aluminum Co., Ltd
Precision Metal Works Ltd

16.08
242.15
242.15

Assessment Rates In accordance with 19 CFR
351.212b2, Commerce intends to issue appropriate assessment instructions to U.S. Customs and Border Protection CBP 15 days after publication of these final results of review, to liquidate shipments of subject merchandise produced and/or exported by the companies listed above, entered, or withdrawn from warehouse, for consumption on or after January 1, 2018
through December 31, 2018, at the ad valorem rates listed above.

jbell on DSKJLSW7X2PROD with NOTICES

Cash Deposit Requirements In accordance with section 751a1
of the Act, Commerce will instruct CBP
to collect cash deposits of estimated countervailing duties in the amounts shown for each of the respective companies listed above for shipments of subject merchandise entered, or withdrawn from warehouse, for consumption on or after the date of publication of these final results of review. For all non-reviewed firms, we will instruct CBP to collect cash deposits of estimated countervailing duties at the most recent companyspecific or all-others rate applicable to the company, as appropriate. These cash deposit requirements, when imposed, shall remain in effect until further notice.
Administrative Protective Order This notice serves as a reminder to parties subject to administrative protective order APO of their responsibility concerning the destruction of proprietary information 5 See Preliminary Results; see also Memorandum, Administrative Review of Countervailing Duty Order on Aluminum Extrusions from the Peoples Republic of China: AFA Calculation Memorandum for the Preliminary Results of Review; 2018, dated August 28, 2020.

VerDate Sep<11>2014

19:27 Jan 21, 2021

Jkt 253001

Dated: January 13, 2021.
Jeffrey I. Kessler, Assistant Secretary for Enforcement and Compliance.

Appendix I
Scope of the Order The merchandise covered by the orders is aluminum extrusions which are shapes and forms, produced by an extrusion process, made from aluminum alloys having metallic elements corresponding to the alloy series designations published by The Aluminum Association commencing with the numbers 1, 3, and 6 or proprietary equivalents or other certifying body equivalents.
Specifically, the subject merchandise made from aluminum alloy with an Aluminum Association series designation commencing with the number 1 contains not less than 99
percent aluminum by weight. The subject merchandise made from aluminum alloy with an Aluminum Association series designation commencing with the number 3
contains manganese as the major alloying element, with manganese accounting for not more than 3.0 percent of total materials by weight. The subject merchandise is made from an aluminum alloy with an Aluminum Association series designation commencing with the number 6 contains magnesium and silicon as the major alloying elements, with magnesium accounting for at least 0.1
percent but not more than 2.0 percent of total materials by weight, and silicon accounting for at least 0.1 percent but not more than 3.0
percent of total materials by weight. The subject aluminum extrusions are properly identified by a four-digit alloy series without either a decimal point or leading letter.
Illustrative examples from among the approximately 160 registered alloys that may characterize the subject merchandise are as follows: 1350, 3003, and 6060.
Aluminum extrusions are produced and imported in a wide variety of shapes and forms, including, but not limited to, hollow profiles, other solid profiles, pipes, tubes, bars, and rods.
Aluminum extrusions that are drawn subsequent to extrusion drawn aluminum are also included in the scope.
Aluminum extrusions are produced and imported with a variety of finishes both coatings and surface treatments, and types of fabrication. The types of coatings and treatments applied to subject aluminum
PO 00000

Frm 00020

Fmt 4703

Sfmt 4703

6631

extrusions include, but are not limited to, extrusions that are mill finished i.e., without any coating or further finishing, brushed, buffed, polished, anodized including brightdip anodized, liquid painted, or powder coated. Aluminum extrusions may also be fabricated, i.e., prepared for assembly.
Such operations would include, but are not limited to, extrusions that are cut-to-length, machined, drilled, punched, notched, bent, stretched, knurled, swedged, mitered, chamfered, threaded, and spun. The subject merchandise includes aluminum extrusions that are finished coated, painted, etc., fabricated, or any combination thereof.
Subject aluminum extrusions may be described at the time of importation as parts for final finished products that are assembled after importation, including, but not limited to, window frames, door frames, solar panels, curtain walls, or furniture. Such parts that otherwise meet the definition of aluminum extrusions are included in the scope. The scope includes the aluminum extrusion components that are attached e.g., by welding or fasteners to form subassemblies, i.e., partially assembled merchandise unless imported as part of the finished goods kit defined further below. The scope does not include the non-aluminum extrusion components of subassemblies or subject kits.
Subject extrusions may be identified with reference to their end use, such as fence posts, electrical conduits, door thresholds, carpet trim, or heat sinks that do not meet the finished heat sink exclusionary language below. Such goods are subject merchandise if they otherwise meet the scope definition, regardless of whether they are ready for use at the time of importation.
The following aluminum extrusion products are excluded: aluminum extrusions made from aluminum alloy with an Aluminum Association series designations commencing with the number 2 and containing in excess of 1.5 percent copper by weight; aluminum extrusions made from aluminum alloy with an Aluminum Association series designation commencing with the number 5 and containing in excess of 1.0 percent magnesium by weight; and aluminum extrusions made from aluminum alloy with an Aluminum Association series designation commencing with the number 7
and containing in excess of 2.0 percent zinc by weight.
The scope also excludes finished merchandise containing aluminum extrusions as parts that are fully and permanently assembled and completed at the time of entry, such as finished windows with glass, doors with glass or vinyl, picture frames with glass pane and backing material, and solar panels. The scope also excludes finished goods containing aluminum extrusions that are entered unassembled in a finished goods kit. A finished goods kit is understood to mean a packaged combination of parts that contains, at the time of importation, all of the necessary parts to fully assemble a final finished good and requires no further finishing or fabrication, such as cutting or punching, and is assembled as is into a finished product. An imported product will not be considered a finished goods kit and therefore excluded from the scope of the
E:FRFM22JAN1.SGM

22JAN1