Quiero saber acerca de...

53638

Federal Register / Vol. 86, No. 185 / Tuesday, September 28, 2021 / Notices
directly at http enforcement.trade.gov/
frn/.
Final Results of Sunset Review Pursuant to sections 751c1 and 752b of the Act, Commerce determines that revocation of the Order would likely lead to continuation or recurrence of countervailable subsidies at the rates listed below.
Net subsidy rate percent
Exporter/producer
Acciaieria Arvedi S.p.A., Finarvedi S.p.A., Arvedi Tubi Acciaio S.p.A., Euro-Trade S.p.A., and Siderurgica Triestina Srl., collectively, the Arvedi Group 7
Marcegaglia S.p.A. and Marfin S.p.A., collectively, the Marcegaglia Group 8
Ilva S.p.A
All Others

0.48
0.07
38.51
13.02

Administrative Protective Order APO
This notice serves as the only reminder to interested parties subject to an APO of their responsibility concerning the return or destruction of proprietary information disclosed under APO in accordance with 19 CFR
351.305. Timely notification of the return or destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and terms of an APO is a violation which is subject to sanction.
Notification to Interested Parties We are issuing and publishing these final results and notice in accordance with sections 751c, 752b, and 777i1 of the Act and 19 CFR 351.218.
Dated: September 22, 2021.
Christian Marsh, Acting Assistant Secretary for Enforcement and Compliance.

Appendix I
Scope of the Order The products covered by this order are certain flat-rolled steel products, either clad, plated, or coated with corrosion-resistant metals such as zinc, aluminum, or zinc-, 7 Because the net subsidy rate was de minimis for Acciaieria Arvedi S.p.A., Finarvedi S.p.A., Arvedi Tubi Acciaio S.p.A., Euro-Trade S.p.A., and Siderurgica Triestina Srl., merchandise both produced and exported by Acciaieria Arvedi S.p.A., Finarvedi S.p.A., Arvedi Tubi Acciaio S.p.A., EuroTrade S.p.A., and Siderurgica Triestina Srl. is excluded from the Order.
8 Because the net subsidy rate was de minimis for Marcegaglia S.p.A. and Marfin S.p.A., merchandise both produced and exported by Marcegaglia S.p.A.
and Marfin S.p.A. is excluded from the Order.

VerDate Sep<11>2014

16:35 Sep 27, 2021

Jkt 253001

aluminum-, nickelor iron-based alloys, whether or not corrugated or painted, varnished, laminated, or coated with plastics or other non-metallic substances in addition to the metallic coating. The products covered include coils that have a width of 12.7 mm or greater, regardless of form of coil e.g., in successively superimposed layers, spirally oscillating, etc.. The products covered also include products not in coils e.g., in straight lengths of a thickness less than 4.75 mm and a width that is 12.7 mm or greater and that measures at least 10 times the thickness. The products covered also include products not in coils e.g., in straight lengths of a thickness of 4.75 mm or more and a width exceeding 150 mm and measuring at least twice the thickness. The products described above may be rectangular, square, circular, or other shape and include products of either rectangular or non-rectangular cross-section where such cross-section is achieved subsequent to the rolling process, i.e., products which have been worked after rolling e.g., products which have been beveled or rounded at the edges. For purposes of the width and thickness requirements referenced above:
1 Where the nominal and actual measurements vary, a product is within the scope if application of either the nominal or actual measurement would place it within the scope based on the definitions set forth above, and 2 where the width and thickness vary for a specific product e.g., the thickness of certain products with non-rectangular crosssection, the width of certain products with non-rectangular shape, etc., the measurement at its greatest width or thickness applies.
Steel products included in the scope of this order are products in which: 1 Iron predominates, by weight, over each of the other contained elements; 2 the carbon content is 2 percent or less, by weight; and 3 none of the elements listed below exceeds the quantity, by weight, respectively indicated:
2.50 percent of manganese, or 3.30 percent of silicon, or 1.50 percent of copper, or 1.50 percent of aluminum, or 1.25 percent of chromium, or 0.30 percent of cobalt, or 0.40 percent of lead, or 2.00 percent of nickel, or 0.30 percent of tungsten also called wolfram, or 0.80 percent of molybdenum, or 0.10 percent of niobium also called columbium, or 0.30 percent of vanadium, or 0.30 percent of zirconium Unless specifically excluded, products are included in this scope regardless of levels of boron and titanium.
For example, specifically included in this scope are vacuum degassed, fully stabilized commonly referred to as interstitial-free IF
steels and high strength low alloy HSLA
steels. IF steels are recognized as low carbon steels with micro-alloying levels of elements such as titanium and/or niobium added to stabilize carbon and nitrogen elements.
HSLA steels are recognized as steels with
PO 00000

Frm 00011

Fmt 4703

Sfmt 4703

micro-alloying levels of elements such as chromium, copper, niobium, titanium, vanadium, and molybdenum.
Furthermore, this scope also includes Advanced High Strength Steels AHSS and Ultra High Strength Steels UHSS, both of which are considered high tensile strength and high elongation steels.
Subject merchandise also includes corrosion-resistant steel that has been further processed in a third country, including but not limited to annealing, tempering painting, varnishing, trimming, cutting, punching and/
or slitting or any other processing that would not otherwise remove the merchandise from the scope of the Order if performed in the country of manufacture of the in-scope corrosion resistant steel.
All products that meet the written physical description, and in which the chemistry quantities do not exceed any one of the noted element levels listed above, are within the scope of this order unless specifically excluded. The following products are outside of and/or specifically excluded from the scope of this order:
Flat-rolled steel products either plated or coated with tin, lead, chromium, chromium oxides, both tin and lead terne plate, or both chromium and chromium oxides tin free steel, whether or not painted, varnished or coated with plastics or other non-metallic substances in addition to the metallic coating;
Clad products in straight lengths of 4.7625 mm or more in composite thickness and of a width which exceeds 150 mm and measures at least twice the thickness; and Certain clad stainless flat-rolled products, which are three-layered corrosionresistant flat-rolled steel products less than 4.75 mm in composite thickness that consist of a flat-rolled steel product clad on both sides with stainless steel in a 20%-60%-20%
ratio.
The products subject to the Order are currently classified in the Harmonized Tariff Schedule of the United States HTSUS under item numbers: 7210.30.0030, 7210.30.0060, 7210.41.0000, 7210.49.0030, 7210.49.0091, 7210.49.0095, 7210.61.0000, 7210.69.0000, 7210.70.6030, 7210.70.6060, 7210.70.6090, 7210.90.6000, 7210.90.9000, 7212.20.0000, 7212.30.1030, 7212.30.1090, 7212.30.3000, 7212.30.5000, 7212.40.1000, 7212.40.5000, 7212.50.0000, 7212.60.0000, 7210.49.0040, and 7210.49.0045.
The products subject to the Order may also enter under the following HTSUS item numbers: 7210.90.1000, 7215.90.1000, 7215.90.3000, 7215.90.5000, 7217.20.1500, 7217.30.1530, 7217.30.1560, 7217.90.1000, 7217.90.5030, 7217.90.5060, 7217.90.5090, 7225.91.0000, 7225.92.0000, 7225.99.0090, 7226.99.0110, 7226.99.0130, 7226.99.0180, 7228.60.6000, 7228.60.8000, and 7229.90.1000.
The HTSUS subheadings above are provided for convenience and customs purposes only. The written description of the scope of the Order is dispositive.

Appendix II
List of Topics Discussed in the Issues and Decision Memorandum I. Summary
E:FRFM28SEN1.SGM

28SEN1