Quiero saber acerca de...

47252

Federal Register / Vol. 86, No. 161 / Tuesday, August 24, 2021 / Proposed Rules
Your request should state that the NRC
does not routinely edit comment submissions to remove such information before making the comment submissions available to the public or entering the comment into ADAMS.
I. Discussion
lotter on DSK11XQN23PROD with PROPOSALS1

On July 1, 2021, the NRC solicited comments on the proposed NuScale small modular reactor design certification. The NRC proposed amendments to its regulations so that applicants or licensees intending to construct and operate a NuScale standard design may do so by referencing the design certification rule.
The public comment period was originally scheduled to close on August 30, 2021.
On July 27, 2021, the NRC received a public comment ADAMS Accession No. ML21209A763 requesting that the comment period for the proposed rule be extended by an additional 90 days.
The request states that due to the large volume of related documents that need to be reviewed, additional time is needed to submit comments. No specific basis was given for requesting an additional 90 days to prepare comments.
The NRC seeks to ensure that the public has a reasonable opportunity to provide the NRC with comments on this proposed action. The NRC
acknowledges that the rulemaking documents contain a significant amount of information. However, the NRC is also responsible for deciding whether to issue a design certification within a reasonable time. Accordingly, to balance these interests, the NRC has decided to extend the comment period for the proposed rule for an additional 45 days.
A 45-day extension provides a reasonable opportunity for all stakeholders to review these documents and to develop informed comments on these documents, while not unduly delaying the NRCs final decision on the design certification.
The NRC has decided to extend the public comment period for the proposed rule until October 14, 2021, to allow more time for members of the public to submit their comments.
Dated: August 17, 2021.
For the Nuclear Regulatory Commission.
Annette L. Vietti-Cook, Secretary of the Commission.
FR Doc. 202118071 Filed 82321; 8:45 am BILLING CODE 759001P

VerDate Sep<11>2014

16:21 Aug 23, 2021

Jkt 253001

DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration 14 CFR Part 39
Docket No. FAA20210692; Project Identifier MCAI202001585T
RIN 2120AA64

Airworthiness Directives; Yabora Industria Aeronautica S.A. Type Certificate Previously Held by Embraer S.A. Airplanes Federal Aviation Administration FAA, DOT.
ACTION: Notice of proposed rulemaking NPRM.
AGENCY:

The FAA proposes to supersede Airworthiness Directive AD
20181928, which applies to certain Embraer S.A. Model ERJ 190100 STD, 100 LR, 100 ECJ, 100 IGW, 200
STD, 200 LR, and 200 IGW airplanes;
and AD 20141616, which applies to all of those airplane models. AD 2014
1616 requires, for certain airplanes, retorquing and replacing the pylon lower link fittings, and for all airplanes, repetitively retorquing those fittings. AD
20181928 requires modifying the attaching parts of the pylon lower link fittings. Since the FAA issued AD 2014
1616 and AD 20181928, the FAA
finds it necessary to change the compliance time for the modification.
This proposed AD would require an inspection of certain shear pins, replacement if necessary, and revised compliance times for the modification, as specified in an Agencia Nacional de Aviac ao Civil ANAC AD, which is proposed for incorporation by reference.
The FAA is proposing this AD to address the unsafe condition on these products.

SUMMARY:

The FAA must receive comments on this proposed AD by October 8, 2021.
ADDRESSES: You may send comments, using the procedures found in 14 CFR
11.43 and 11.45, by any of the following methods:
Federal eRulemaking Portal: Go to https www.regulations.gov. Follow the instructions for submitting comments.
Fax: 2024932251.
Mail: U.S. Department of Transportation, Docket Operations, M
30, West Building Ground Floor, Room W12140, 1200 New Jersey Avenue SE, Washington, DC 20590.
Hand Delivery: Deliver to Mail address above between 9 a.m. and 5
p.m., Monday through Friday, except Federal holidays.
For ANAC material that will be incorporated by reference IBR in this DATES:

PO 00000

Frm 00011

Fmt 4702

Sfmt 4702

AD, contact National Civil Aviation Agency ANAC, Aeronautical Products Certification Branch GGCP, Rua Dr.
Orlando Feirabend Filho, 230Centro Empresarial AquariusTorre B
Andares 14 a 18, Parque Residencial Aquarius, CEP 12.246190Sao Jose dos CamposSP, BRAZIL, Tel: 55 12
32036600; Email: pac@anac.gov.br;
internet www.anac.gov.br/en/. You may find this IBR material on the ANAC
website at https sistemas.anac.gov.br/
certificacao/DA/DAE.asp. For Embraer service information identified in this proposed AD, contact Embraer S.A., Technical Publications Section PC
060, Av. Brigadeiro Faria Lima, 2170
Putim12227901 Sao Jose dos CamposSPBrazil; telephone +55 12
39275852 or +55 12 33090732; fax +55 12 39277546; email distrib@
embraer.com.br; internet http
www.flyembraer.com. For Embraer service information identified in this proposed AD that is applicable to Yabora Industria Aeronautica S.A.
Model ERJ 190100 ECJ airplanes, contact Embraer S.A., Technical Publications Section PC 560, Rodovia Presidente Dutra, km 134, 12247004
Distrito Eugenio de MeloSao Jose dos CamposSPBrazil; telephone +55 12
39270386; email distrib@
embraer.com.br; internet https
www.mytechcare.embraer.com. You may view this IBR material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 2062313195.
It is also available in the AD docket on the internet at https
www.regulations.gov by searching for and locating Docket No. FAA2021
0692.
Examining the AD Docket You may examine the AD docket on the internet at https
www.regulations.gov by searching for and locating Docket No. FAA2021
0692; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays.
The AD docket contains this NPRM, any comments received, and other information. The street address for Docket Operations is listed above.
FOR FURTHER INFORMATION CONTACT:

Krista Greer, Aerospace Engineer, Large Aircraft Section, International Validation Branch, FAA, 2200 South 216th St., Des Moines, WA 98198;
telephone and fax 2062313221; email krista.greer@faa.gov.
SUPPLEMENTARY INFORMATION:

E:FRFM24AUP1.SGM

24AUP1