Quiero saber acerca de...

Federal Register / Vol. 86, No. 158 / Thursday, August 19, 2021 / Rules and Regulations be provided to the U.S. Government upon request. Refer to section 742.17b of the EAR for guidance.

e
Note 3 to paragraph e: Applicants for license applications for exports and reexports to countries requiring that a governmentissued certificate or permit be obtained prior to importing the commodity must have the initial government-issued certificate or permit prior to any export. All BIS licenses for ECCNs 0A501 and 0A505 commodities will include a standard rider that requires that the applicant/exporter have a government-issued certificate or permit on file prior to export. Note that while government-issued certificates or permits are usually valid for 1 year, BIS licenses are valid for 4 years. The text of the standard rider will generally be as follows: A current, complete, accurate and valid Firearms Convention FC
Import Certificate or equivalent official document shall be obtained, if required by the government of the importing country, from the Ultimate Consignee and maintained in the Exporters file prior to any export of the items listed on this license. A copy shall be provided to the U.S. Government upon request. Refer to 742.17b of the EAR for guidance.

Supplement No. 6 to Part 748 Removed and Reserved 9. Supplement No. 6 to part 748 is removed and reserved.

10. The authority citation for part 758
is revised to read as follows:

Authority: 50 U.S.C. 48014852; 50 U.S.C.
4601 et seq.; 50 U.S.C. 1701 et seq.; E.O.
13222, 66 FR 44025, 3 CFR, 2001 Comp., p.
783.

11. Section 758.1 is amended by revising paragraph g4ii to read as follows:

758.1 The Electronic Export Information EEI filing to the Automated Export System AES.

lotter on DSK11XQN23PROD with RULES1

g
4
ii Identifying end item firearms by items level classification or other control descriptor in the EEI filing in AES. For any export of items controlled under ECCNs 0A501.a or .b, or shotguns with a barrel length less than 18 inches controlled under ECCN 0A502, in addition to any other required data for the associated EEI filing when an exporter will use the alternative submission method under 743.4h for conventional arms reporting, you must include the items paragraph classification i.e., .a, or .b for ECCN

VerDate Sep<11>2014

16:12 Aug 18, 2021

Jkt 253001

PART 774THE COMMERCE
CONTROL LIST
12. The authority citation for part 774
continues to read as follows:

Authority: 50 U.S.C. 48014852; 50 U.S.C.
4601 et seq.; 50 U.S.C. 1701 et seq.; 10 U.S.C.
8720; 10 U.S.C. 8730e; 22 U.S.C. 287c, 22
U.S.C. 3201 et seq.; 22 U.S.C. 6004; 42 U.S.C.
2139a; 15 U.S.C. 1824; 50 U.S.C. 4305; 22
U.S.C. 7201 et seq.; 22 U.S.C. 7210; E.O.
13026, 61 FR 58767, 3 CFR, 1996 Comp., p.
228; E.O. 13222, 66 FR 44025, 3 CFR, 2001
Comp., p. 783.

Supplement No. 1 to Part 774
Amended 13. In Supplement No. 1 to part 774, Category 0, remove Export Control Classification Number ECCN 0A018.

14. In Supplement No. 1 to part 774, Category 0, revise Export Control Classification Number ECCN 0A501 to read as follows:

0A501 Firearms except 0A502 shotguns and related commodities as follows see List of Items controlled.

PART 758EXPORT CLEARANCE
REQUIREMENTS

0A501, or for shotguns controlled under 0A502 the letters SB for short barrel length less than 18 inches as the first text to appear in the Commodity description block in the EEI filing in AES. See 743.4h of the EAR for the use of this information for conventional arms reporting.

License Requirements Reason for Control: NS, RS, FC, UN, AT
Controls NS applies to entire entry except 0A501.y.
RS applies to entire entry except 0A501.y.
FC applies to entire entry except 0A501.y.
UN applies to entire entry.
AT applies to entire entry.

Country chart see supp. No. 1 to part 738
NS Column 1
RS Column 1
FC Column 1
See 746.1 of the EAR for UN controls AT Column 1

License Requirement Note: In addition to using the Commerce Country Chart to determine license requirements, a license is required for exports and reexports of ECCN 0A501.y.7 firearms to the Peoples Republic of China.
List Based License Exceptions See Part 740
for a Description of All License Exceptions LVS: $500 for 0A501.c, .d, and .x.
$500 for 0A501.c, .d, .e, and .x if the ultimate destination is Canada.
GBS: N/A

PO 00000

Frm 00017

Fmt 4700

Sfmt 4700

46595

Special Conditions for STA
STA: Paragraph c2 of License Exception STA 740.20c2 of the EAR may not be used for any item in this entry.
List of Items Controlled Related Controls: 1 Firearms that are fully automatic, and magazines with a capacity of greater than 50 rounds, are subject to the ITAR. 2 See ECCN 0A502 for shotguns and their parts and components that are subject to the EAR.
Also see ECCN 0A502 for shot-pistols. 3
See ECCN 0A504 and USML Category XII
for controls on optical sighting devices.
Related Definitions: N/A
Items:
a. Non-automatic and semi-automatic firearms equal to .50 caliber 12.7 mm or less.
Note 1 to paragraph 0A501.a:
Combination pistols are controlled under ECCN 0A501.a. A combination pistol a.k.a., a combination gun has at least one rifled barrel and at least one smoothbore barrel generally a shotgun style barrel.
Technical Note to 0A501.a: Firearms described in 0A501.a includes those chambered for the .50 BMG cartridge.
b. Non-automatic and non-semi-automatic rifles, carbines, revolvers or pistols with a caliber greater than .50 inches 12.7 mm but less than or equal to .72 inches 18.0 mm.
c. The following types of parts and components if specially designed for a commodity controlled by paragraph .a or .b of this entry, or USML Category I unless listed in USML Category Ig or h: Barrels, cylinders, barrel extensions, mounting blocks trunnions, bolts, bolt carriers, operating rods, gas pistons, trigger housings, triggers, hammers/striker, sears, disconnectors, pistol grips that contain fire control parts or components e.g., triggers, hammers/
striker, sears, disconnectors and buttstocks that contain fire control parts or components.
Technical Note to 0A501.c: Barrel blanks that have reached a stage in manufacturing in which they are either chambered or rifled are controlled by 0A501.c.
d. Detachable magazines with a capacity of 17 to 50 rounds specially designed for a commodity controlled by paragraph .a or .b of this entry.
Note 2 to paragraph 0A501.d: Magazines with a capacity of 16 rounds or less are controlled under 0A501.x; for magazines with a capacity greater than 50 rounds, see USML Category I.
e. Receivers frames and complete breech mechanisms, including castings, forgings, stampings, or machined items thereof, specially designed for a commodity controlled by paragraph .a or .b of this entry.
Note 3 to 0A501.e: Frames receivers under 0A501.e refers to any part or component of the firearm that has or is customarily marked with a serial number when required by law. This paragraph 0A501.e is synonymous with a part or component that is regulated by the Bureau of Alcohol, Tobacco, Firearms and
E:FRFM19AUR1.SGM

19AUR1