Quiero saber acerca de...

Federal Register / Vol. 86, No. 123 / Wednesday, June 30, 2021 / Rules and Regulations condition, if not addressed, could, in case of a spark or flame in the area of the pump PCB, result in a fire or explosion and consequent loss of the airplane.

be done and the airplane can be put back in an airworthy condition. Any substitutions or changes to procedures or tests identified as RC require approval of an AMOC.

f Compliance Comply with this AD within the compliance times specified, unless already done.

k Related Information For more information about this AD, contact Vladimir Ulyanov, Aerospace Engineer, Large Aircraft Section, International Validation Branch, FAA, 2200
South 216th St., Des Moines, WA 98198;
telephone and fax 2062313229; email Vladimir.Ulyanov@faa.gov.

g Requirements Except as specified in paragraph h of this AD: Comply with all required actions and compliance times specified in, and in accordance with, European Union Aviation Safety Agency EASA AD 20200265, dated December 2, 2020 EASA AD 20200265.
h Exceptions to EASA AD 20200265
1 Where EASA AD 20200265 refers to its effective date, this AD requires using the effective date of this AD.
2 The Remarks section of EASA AD
20200265 does not apply to this AD.

jbell on DSKJLSW7X2PROD with RULES

i No Reporting Requirement Although the service information referenced in EASA AD 20200265 specifies to submit certain information to the manufacturer, this AD does not include that requirement.
j Other FAA AD Provisions The following provisions also apply to this AD:
1 Alternative Methods of Compliance AMOCs: The Manager, Large Aircraft Section, International Validation Branch, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or responsible Flight Standards Office, as appropriate. If sending information directly to the Large Aircraft Section, International Validation Branch, send it to the attention of the person identified in paragraph k of this AD.
Information may be emailed to: 9-AVS-AIR730-AMOC@faa.gov. Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the responsible Flight Standards Office.
2 Contacting the Manufacturer: For any requirement in this AD to obtain instructions from a manufacturer, the instructions must be accomplished using a method approved by the Manager, Large Aircraft Section, International Validation Branch, FAA; or EASA; or Airbus SASs EASA Design Organization Approval DOA. If approved by the DOA, the approval must include the DOA-authorized signature.
3 Required for Compliance RC: Except as required by paragraph j2 of this AD, if any service information contains procedures or tests that are identified as RC, those procedures and tests must be done to comply with this AD; any procedures or tests that are not identified as RC are recommended. Those procedures and tests that are not identified as RC may be deviated from using accepted methods in accordance with the operators maintenance or inspection program without obtaining approval of an AMOC, provided the procedures and tests identified as RC can
VerDate Sep<11>2014

16:21 Jun 29, 2021

Jkt 253001

l Material Incorporated by Reference 1 The Director of the Federal Register approved the incorporation by reference IBR of the service information listed in this paragraph under 5 U.S.C. 552a and 1 CFR
part 51.
2 You must use this service information as applicable to do the actions required by this AD, unless this AD specifies otherwise.
i European Union Aviation Safety Agency EASA AD 20200265, dated December 2, 2020.
ii Reserved 3 For EASA AD 20200265, contact EASA, Konrad-Adenauer-Ufer 3, 50668
Cologne, Germany; telephone +49 221 8999
000; email ADs@easa.europa.eu; internet www.easa.europa.eu. You may find this EASA AD on the EASA website at https
ad.easa.europa.eu.
4 You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 2062313195. This material may be found in the AD docket on the internet at https
www.regulations.gov by searching for and locating Docket No. FAA20210184.
5 You may view this material that is incorporated by reference at the National Archives and Records Administration NARA. For information on the availability of this material at NARA, email fedreg.legal@
nara.gov, or go to: https www.archives.gov/
federal-register/cfr/ibr-locations.html.
Issued on June 6, 2021.
Lance T. Gant, Director, Compliance & Airworthiness Division, Aircraft Certification Service.
FR Doc. 202113781 Filed 62921; 8:45 am BILLING CODE 491013P

DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration 14 CFR Part 71
Docket No. FAA20210209; Airspace Docket No. 20ANM10
RIN 2120AA66

Establishment of Class E Airspace;
Great Falls, MT
Federal Aviation Administration FAA, DOT.
ACTION: Final rule.
AGENCY:

PO 00000

Frm 00021

Fmt 4700

Sfmt 4700

34625

This action establishes Class E domestic en route airspace extending upward from 1,200 feet above the surface at Great Falls, MT. This airspace facilitates vectoring of Instrument Flight Rules IFR aircraft and it properly contains IFR aircraft operating on direct routes under the control of Salt Lake City Air Route Traffic Control Center ARTCC.

SUMMARY:

Effective 0901 UTC, October 7, 2021. The Director of the Federal Register approves this incorporation by reference action under 1 CFR part 51, subject to the annual revision of FAA
Order 7400.11 and publication of conforming amendments.

DATES:

FAA Order 7400.11E, Airspace Designations and Reporting Points, and subsequent amendments can be viewed online at https
www.faa.gov//air_traffic/publications/.
For further information, you can contact the Airspace Policy Group, Federal Aviation Administration, 800
Independence Avenue SW, Washington, DC 20591; telephone: 202 2678783.
The Order is also available for inspection at the National Archives and Records Administration NARA. For information on the availability of FAA
Order 7400.11E at NARA, email fedreg.legal@nara.gov or go to https
www.archives.gov/federal-register/cfr/
ibr-locations.html.
ADDRESSES:

FOR FURTHER INFORMATION CONTACT:

Matthew Van Der Wal, Federal Aviation Administration, Western Service Center, Operations Support Group, 2200 S
216th Street, Des Moines, WA 98198;
telephone 206 2313695.
SUPPLEMENTARY INFORMATION:

Authority for This Rulemaking The FAAs authority to issue rules regarding aviation safety is found in Title 49 of the United States Code.
Subtitle I, Section 106 describes the authority of the FAA Administrator.
Subtitle VII, Aviation Programs, describes in more detail the scope of the agencys authority. This rulemaking is promulgated under the authority described in Subtitle VII, Part A, Subpart I, Section 40103. Under that section, the FAA is charged with prescribing regulations to assign the use of airspace necessary to ensure the safety of aircraft and the efficient use of airspace. This regulation is within the scope of that authority as it establishes Class E airspace at Great Falls, MT, to ensure the safety and management of IFR operations within the National Airspace System.

E:FRFM30JNR1.SGM

30JNR1