Quiero saber acerca de...

lotter on DSK11XQN23PROD with RULES2

34580

Federal Register / Vol. 86, No. 122 / Tuesday, June 29, 2021 / Rules and Regulations
1, 2011 ASTM D1837, IBR approved for 1065.720a.
14 ASTM D183812a, Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum LP Gases, approved December 1, 2012 ASTM
D1838, IBR approved for 1065.720a.
15 ASTM D194503 Reapproved 2010, Standard Test Method for Analysis of Natural Gas by Gas Chromatography, approved January 1, 2010 ASTM D1945, IBR approved for 1065.715a.
16 ASTM D215811, Standard Test Method for Residues in Liquefied Petroleum LP Gases, approved January 1, 2011 ASTM D2158, IBR approved for 1065.720a.
17 ASTM D216307, Standard Test Method for Determination of Hydrocarbons in Liquefied Petroleum LP Gases and Propane/Propene Mixtures by Gas Chromatography, approved December 1, 2007 ASTM
D2163, IBR approved for 1065.720a.
18 ASTM D259812, Standard Practice for Calculation of Certain Physical Properties of Liquefied Petroleum LP Gases from Compositional Analysis, approved November 1, 2012 ASTM D2598, IBR approved for 1065.720a.
19 ASTM D262216, Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive Xray Fluorescence Spectrometry, approved January 1, 2016 ASTM
D2622, IBR approved for 1065.703b and 1065.710b and c.
20 ASTM D269913b, Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel, approved October 1, 2013 ASTM D2699, IBR
approved for 1065.710b.
21 ASTM D270013b, Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel, approved October 1, 2013 ASTM D2700, IBR
approved for 1065.710b.
22 ASTM D271313, Standard Test Method for Dryness of Propane Valve Freeze Method, approved October 1, 2013 ASTM D2713, IBR approved for 1065.720a.
23 ASTM D288013b, Standard Specification for Gas Turbine Fuel Oils, approved November 15, 2013 ASTM
D2880, IBR approved for 1065.701f.
24 ASTM D298695a, Standard Practice for Evaluation of Air Assay Media by the Monodisperse DOP
Dioctyl Phthalate Smoke Test, approved September 10, 1995 ASTM
D2986, IBR approved for 1065.170c. Note: This standard was withdrawn by ASTM.

VerDate Sep<11>2014

01:55 Jun 29, 2021

Jkt 253001

25 ASTM D323113, Standard Test Method for Phosphorus in Gasoline, approved June 15, 2013 ASTM
D3231, IBR approved for 1065.710b and c.
26 ASTM D323712, Standard Test Method for Lead in Gasoline By Atomic Absorption Spectroscopy, approved June 1, 2012 ASTM D3237, IBR
approved for 1065.710b and c.
27 ASTM D405211, Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter, approved October 15, 2011 ASTM D4052, IBR approved for 1065.703b.
28 ASTM D462912, Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/
Inlet Oxidative Combustion and Chemiluminescence Detection, approved April 15, 2012 ASTM
D4629, IBR approved for 1065.655e.
29 ASTM D481413b, Standard Specification for Automotive SparkIgnition Engine Fuel, approved December 1, 2013 ASTM D4814, IBR
approved for 1065.701f.
30 ASTM D481513, Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C1 to C4 Alcohols in Gasoline by Gas Chromatography, approved October 1, 2013 ASTM
D4815, IBR approved for 1065.710b.
31 ASTM D518603 Reapproved 2009, Standard Test Method for Determination of the Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels and Aviation Turbine Fuels By Supercritical Fluid Chromatography, approved April 15, 2009 ASTM
D5186, IBR approved for 1065.703b.
32 ASTM D519113, Standard Test Method for Vapor Pressure of Petroleum Products Mini Method, approved December 1, 2013 ASTM D5191, IBR
approved for 1065.710b and c.
33 ASTM D529110, Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants, approved May 1, 2010 ASTM
D5291, IBR approved for 1065.655e.
34 ASTM D545319a, Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence, approved July 1, 2019
ASTM D5453, IBR approved for 1065.703b and 1065.710b.
35 ASTM D559900 Reapproved 2010, Standard Test Method for Determination of Oxygenates in
PO 00000

Frm 00274

Fmt 4701

Sfmt 4700

Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection, approved October 1, 2010
ASTM D5599, IBR approved for 1065.655e and 1065.710b.
36 ASTM D576212 Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence, approved April 15, 2012 ASTM D5762, IBR approved for 1065.655e.
37 ASTM D576910, Standard Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry, approved May 1, 2010 ASTM
D5769, IBR approved for 1065.710b.
38 ASTM D579713, Standard Specification for Fuel Methanol M70M85 for Automotive Spark-Ignition Engines, approved June 15, 2013
ASTM D5797, IBR approved for 1065.701f.
39 ASTM D579813a, Standard Specification for Ethanol Fuel Blends for Flexible Fuel Automotive SparkIgnition Engines, approved June 15, 2013 ASTM D5798, IBR approved for 1065.701f.
40 ASTM D6348121, Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared FTIR Spectroscopy, approved February 1, 2012 ASTM D6348, IBR approved for 1065.266b and 1065.275b.
41 ASTM D655010, Standard Test Method for Determination of Olefin Content of Gasolines by SupercriticalFluid Chromatography, approved October 1, 2010 ASTM D6550, IBR
approved for 1065.710b.
42 ASTM D661511a, Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel, approved October 1, 2011 ASTM D6615, IBR
approved for 1065.701f.
43 ASTM D666714 Reapproved 2019, Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence, approved May 1, 2019
ASTM D6667, IBR approved for 1065.720a.
44 ASTM D675112, Standard Specification for Biodiesel Fuel Blend Stock B100 for Middle Distillate Fuels, approved August 1, 2012 ASTM
D6751, IBR approved for 1065.701f.
45 ASTM D698504a, Standard Specification for Middle Distillate Fuel OilMilitary Marine Applications, approved November 1, 2004 ASTM
D6985, IBR approved for 1065.701f.
Note: This standard was withdrawn by ASTM.

E:FRFM29JNR2.SGM

29JNR2