Quiero saber acerca de...

khammond on DSKJM1Z7X2PROD with NOTICES

Federal Register / Vol. 86, No. 29 / Tuesday, February 16, 2021 / Notices hinge/strike machining, weatherstrip or application thereof, mitre or packaging.
All wood mouldings and millwork products are included within the scope even if they are trimmed; cut-to-size; notched;
punched; drilled; or have undergone other forms of minor processing.
Subject merchandise also includes wood mouldings and millwork products that have been further processed in a third country, including but not limited to trimming, cutting, notching, punching, drilling, coating, or any other processing that would not otherwise remove the merchandise from the scope of this order if performed in the country of manufacture of the in-scope product.
Excluded from the scope of this order are countertop/butcherblocks imported as a full countertop/butcherblock panel, exterior fencing, exterior decking and exterior siding products including solid wood siding, nonwood siding e.g., composite or cement, and shingles that are not LVL or finger jointed;
finished and unfinished doors; flooring; parts of stair steps including newel posts, balusters, easing, gooseneck, risers, treads, rail fittings and stair stringers; picture frame components three feet and under in individual lengths; and lumber whether solid, finger-jointed, or edge-glued. To be excluded from the scope, finger-jointed or edge-glued lumber must have a nominal thickness of 1.5 inches or greater and a certification stamp from an American Lumber Standard Committee-certified grading agency. The exclusion for lumber whether solid, finger-jointed, or edge-glued does not apply to screen/surfaced on 4
sides S4S and/or surface 1 side, 2 edges SlS2E stock also called boards that are finger-jointed and/or edge-glued, or to fingerjointed and/or edge-glued moulding or millwork blanks whether or not resawn.
Accordingly, S4S and S1S2E stock/boards that are not finger-jointed or edge glued are excluded from the scope of this order.
Excluded from the scope of this order are all products covered by the scope of the antidumping duty order on Hardwood Plywood from the Peoples Republic of China.
See Certain Hardwood Plywood Products from the Peoples Republic of China:
Amended Final Determination of Sales at Less Than Fair Value, and Antidumping Duty Order, 83 FR 504 January 4, 2018.
Excluded from the scope of this order are all products covered by the scope of the antidumping duty order on Multilayered Wood Flooring from the Peoples Republic of China. See Multilayered Wood Flooring from the Peoples Republic of China: Amended Final Determination of Sales at Less Than Fair Value and Antidumping Duty Order, 76
FR 76690 December 8, 2011.
Excluded from the scope of this order are all products covered by the scope of the antidumping duty order on Wooden Cabinets and Vanities from the Peoples Republic of China. See Wooden Cabinets and Vanities and Components Thereof from the Peoples Republic of China: Antidumping Duty Order, 85 FR 22126 April 21, 2020.
Excluded from the scope of this order are all products covered by the scope of the antidumping duty order on Wooden Bedroom
VerDate Sep<11>2014

17:04 Feb 12, 2021

Jkt 253001

Furniture from the Peoples Republic of China. See Notice of Amended Final Determination of Sales at Less Than Fair Value and Antidumping Duty Order: Wooden Bedroom Furniture from the Peoples Republic of China, 70 FR 329 January 4, 2005.
Imports of wood mouldings and millwork products are primarily entered under the following Harmonized Tariff Schedule of the United States HTSUS numbers:
4409.10.4010, 4409.10.4090, 4409.10.4500, 4409.10.5000, 4409.22.4000, 4409.22.5000,4409.29.4100, and 4409.29.5100. Imports of wood mouldings and millwork products may also enter under HTSUS numbers:
4409.10.6000,4409.10.6500, 4409.22.6000, 4409.22.6500, 4409.29.6100, 4409.29.6600, 4418.20.4000, 4418.20.8030, 4418.20.8060, 4418.99.9095 and 4421.99.9780. While the HTSUS subheadings are provided for convenience and customs purposes, the written description of the scope of the order is dispositive.
FR Doc. 202103151 Filed 21221; 8:45 am BILLING CODE 3510DSP

DEPARTMENT OF COMMERCE
National Oceanic and Atmospheric Administration RTID 0648XA872

Endangered and Threatened Species;
Take of Abalone National Marine Fisheries Service NMFS, National Oceanic and Atmospheric Administration NOAA, Commerce.
ACTION: Notice; receipt of application to renew one scientific research permit.
AGENCY:

Notice is hereby given that NMFS has received a request to renew an existing scientific research permit relating to black abalone. The proposed work is intended to increase knowledge of species listed under the Endangered Species Act ESA and to help guide management, conservation, and recovery efforts. The application may be viewed online at: https
apps.nmfs.noaa.gov/preview/preview_
open_for_comment.cfm.
DATES: Comments or requests for a public hearing on the application must be received at the provided email address see ADDRESSES no later than 5
p.m. Pacific standard time on March 18, 2021.
ADDRESSES: Because all West Coast NMFS offices are currently closed, all written comments on the application should be submitted by email to nmfs.wcr-apps@noaa.gov. Please include the permit number 195712R
in the subject line of the email.
SUMMARY:

PO 00000

Frm 00013

Fmt 4703

Sfmt 4703

9489

FOR FURTHER INFORMATION CONTACT:

Susan Wang, Long Beach, CA email:
Susan.Wang@noaa.gov. Permit application instructions are available from the address above, or online at https apps.nmfs.noaa.gov.
SUPPLEMENTARY INFORMATION:
Species Covered in This Notice The following listed species are covered in this notice:
Endangered black abalone Haliotis cracherodii.
Background Permit 195712R
The NMFS Southwest Fisheries Science Center in La Jolla, California, has requested to renew for five years a research permit that currently allows them to hold, breed, and conduct lab studies on captive black abalone. Under the permit, researchers would continue to maintain healthy populations of black abalone in captive facilities throughout California and test broodstock conditioning and spawning methods at the NMFS Southwest Fisheries Science Center.
The main purpose of the proposed research is to support recovery efforts by developing reliable spawning techniques to consistently produce high quality juvenile black abalone. The proposed research would examine:
1 Broodstock conditioning under different temperatures, diets, and photoperiod regimes;
2 Broodstock conditioning using hormones and simulated seasonal tidal cycles;
3 Spawning induction using dessication, thermal shock, hydrogen peroxide treatments, hormones, and seasonal tidal cycles; and 4 Growth and survival of captivelyproduced juveniles under different temperatures and diets.
Activities would include captive holding, breeding, rearing, grow-out, lab experiments, epipodial tissue sampling, observation, and transport of black abalone. Black abalone are currently held at the Southwest Fisheries Science Center SWFSC, the California Department of Fish and Wildlife Shellfish Health Laboratory, and the Monterey Bay Aquarium. The captive animals include pre-listed abalone that have been in captivity since before black abalone were listed as endangered under the ESA. Some of these were confiscated in law enforcement cases and some were collected as part of emergency response activities.
Additional wild origin black abalone may be obtained through future confiscations and emergency response
E:FRFM16FEN1.SGM

16FEN1