Quiero saber acerca de...

7836

Federal Register / Vol. 86, No. 20 / Tuesday, February 2, 2021 / Proposed Rules
ASME provide limited, read-only access
to the Code Cases in order to facilitate meaningful public comment.

TABLE VIASME CODE CASES PROPOSED FOR NRC APPROVAL
Code Case No.

Supplement
Title Boiler and Pressure Vessel Code Section III

N7120

6 2015 Edition

N1553
N24917

5 2015 Edition
0 2019 Edition

N5391
N6921
N7211
N7554
N779
N8013
N8224
N852
N855
N856

0
6 5
1 9
1 7
0 2
2

N859

5 2015 Edition

N8631

1 2017 Edition

N866
N8701

0 2017 Edition
4 2017 Edition

N879

1 2017 Edition

N883

5 2017 Edition

N884

0 2019 Edition

N886
N887

6 2017 Edition
6 2017 Edition with errata dated August 30, 2019.
0 2019 Edition

N891

2017
2015
2017
2017
2007
2017
2015
2015
2015
2015

Edition Edition Edition Edition Edition Edition Edition Edition Edition Edition

Additional Materials for Subsection NF, Class 1, 2, 3, and MC Supports Fabricated by Welding, Section III, Division 1.
Fiberglass Reinforced Thermosetting Resin Pipe, Section III, Division 1.
Additional Materials for Subsection NF, Classes 1, 2, 3, and MC Supports Fabricated without Welding Section III, Division 1.
UNS N08367 in Class 2 and 3 Valves, Section III, Division 1.
Use of Standard Welding Procedures, Section III, Division 1.
Alternative Rules for Linear Piping Supports, Section III, Division 1.
Use of Polyethylene PE Class 3 Plastic Pipe, Section III, Division 1.
Alternative Rules for Simplified Elastic-Plastic Analysis Class 1, Section III, Division 1.
Rules for Repair of N-Stamped Class 1, 2, and 3 Components, Section III, Division 1.
Application of the ASME Certification Mark, Section III, Divisions 1, 2, 3, and 5.
Application of the ASME NPT Stamp, Section III, Divisions 1, 2, 3, and 5.
SB148 C95800 Valves for Class 3 Construction, Section III, Division 1.
SA494 Grade CW12MW UNS N30002 Nickel Alloy Castings for Construction of NPS
212 and Smaller Flanged Valves for Class 3 Construction, Section III, Division 1.
Construction of ASME B16.9 Wrought Buttwelding Fittings and ASME B16.11 Forged Fittings Made From SB366 UNS N04400 Material for Section III, Class 3 Construction, Section III, Division 1.
Post Weld Heat Treatment PWHT of Valve Seal Welds for P4 and P5A Materials, Section III, Division 1.
Alternative Materials for Construction of Section III, Class 2 Vessels, Section III, Division 1.
Rules for the Elimination of External Surface Defects on Class 1, 2, and 3 Piping, Pumps, or Valves After Component Stamping and Prior to Completion of the N3 Data Report, Section III, Division 1.
Use of Micro-Alloyed Carbon Steel Bar in Patented Mechanical Joints and Fittings, Classes 1, 2, and 3, Section III, Division 1.
Construction of Items Prior to the Establishment of a Section III, Division 1 Owner, Section III, Division 1.
Procedure to Determine Strain Rate for Use with the Environmental Fatigue Design Curve Method and the Environmental Fatigue Correction Factor, Fen, Method as Part of an Environmental Fatigue Evaluation for Components Analyzed per the NB3200 Rules, Section III, Division 1.
Use of Polyethylene Pipe for Class 3, Section III, Division 1.
Alternatives to the Requirements of NB4424.2a, Figure NB42502, and Figure NB
42503 Section III, Division 1.
Alternative Requirements to Appendix XXVI, XXVI2400, XXVI4130, and XXVI4131 for Inspection and Repair of Indentations for Polyethylene Pipe and Piping Components, Section III, Division 1.

jbell on DSKJLSW7X2PROD with PROPOSALS

Boiler and Pressure Vessel Code, Section XI
N5135

6 2017 Edition

N5165
N5613

6 2015 Edition
0 2019 Edition

N63810

1 2019 Edition

N6532

1 2017 Edition

N7021

1 2019 Edition

N7051

2 2017 Edition

N7162
N7663

0 2017 Edition
2 2017 Edition

N768

0 2019 Edition

N7863

1 2017 Edition

N7893

1 2017 Edition

VerDate Sep<11>2014

16:27 Feb 01, 2021

Jkt 253001

PO 00000

Evaluation Criteria for Temporary Acceptance of Flaws in Moderate Energy Class 2 or 3
Piping and Gate Valves, Section XI, Division 1.
Underwater Welding, Section XI, Division 1.
Alternative Requirements for Wall Thickness Restoration of Class 2 and High Energy Class 3 Carbon Steel Piping, Section XI, Division 1.
Similar and Dissimilar Metal Welding Using Ambient Temperature Machine GTAW Temper Bead Technique, Section XI, Division 1.
Qualification Requirements for Full Structural Overlaid Wrought Austenitic Piping Welds, Section XI, Division 1.
Alternative Requirements for Boiling Water Reactor BWR Nozzle Inner Radius and Nozzle-to-Shell Welds, Section XI, Division 1.
Evaluation Criteria for Temporary Acceptance of Degradation in Moderate Energy Class 2
or 3 Vessels and Tanks, Section XI, Division 1.
Alternative Piping Classification and Examination Requirements, Section XI, Division 1.
Nickel Alloy Reactor Coolant Inlay and Onlay for Mitigation of PWR Full Penetration Circumferential Nickel Alloy Dissimilar Metal Welds in Class 1 Items, Section XI, Division 1.
Alternative Volumetric Coverage Requirements for Ultrasonic Examination of Class 1 and 2
Pressure Vessel Weld Joints Greater Than 2 in. 50 mm in Thickness, Section XI, Division 1.
Alternative Requirements for Sleeve Reinforcement of Class 2 and 3 Moderate Energy Carbon Steel Piping, Section XI, Division 1.
Alternative Requirements for Pad Reinforcement of Class 2 and 3 Moderate Energy Carbon Steel Piping for Raw Water Service, Section XI, Division 1.

Frm 00018

Fmt 4702

Sfmt 4702

E:FRFM02FEP1.SGM

02FEP1