Quiero saber acerca de...

7712

Federal Register / Vol. 86, No. 19 / Monday, February 1, 2021 / Notices
hearing, limited to issues raised in the case and rebuttal briefs, must submit a written request to the Assistant Secretary for Enforcement and Compliance, U.S. Department of Commerce, within 30 days after the date of publication of this notice. Requests should contain the partys name, address, and telephone number, the number of participants, whether any participant is a foreign national, and a list of the issues to be discussed. If a request for a hearing is made, Commerce intends to hold the hearing at a time and date to be determined. Parties should confirm by telephone the date, time, and location of the hearing two days before the scheduled date.
Postponement of Final Determination and Extension of Provisional Measures Section 735a2 of the Act provides that a final determination may be postponed until not later than 135 days after the date of the publication of the preliminary determination if, in the event of an affirmative preliminary determination, a request for such postponement is made by exporters who account for a significant proportion of exports of the subject merchandise, or in the event of a negative preliminary determination, a request for such postponement is made by the petitioner.
Section 351.210e2 of Commerces regulations requires that a request by exporters for postponement of the final determination be accompanied by a request for extension of provisional measures from a four-month period to a period not more than six months in duration.
On January 13, 2021, and January 21, 2021 pursuant to 19 CFR 351.210e, Insteel Industries Inc., Mid South Wire Company, National Wire LLC, Oklahoma Steel & Wire Co., and Wire Mesh Corp. the petitioners and Aceromex requested that Commerce postpone the final determination and that provisional measures be extended to a period not to exceed six months.10
In accordance with section 735a2A
of the Act and 19 CFR 351.210b2ii, because: 1 The preliminary determination is affirmative; 2 the requesting exporter accounts for a significant proportion of exports of the subject merchandise; and 3 no compelling reasons for denial exist, Commerce is postponing the final 10 See Petitioners Letter, Standard Steel Welded Wire Mesh from MexicoPetitioners Request for Postponement of Final Antidumping Determination, dated January 13, 2021; see also Aceromexs Letter, Standard Steel Welded Wire Mesh from Mexico: Aceromexs Request to Extend the Due Date for the Final Determination, dated January 21, 2021.

VerDate Sep<11>2014

16:57 Jan 29, 2021

Jkt 253001

determination and extending the provisional measures from a four-month period to a period not greater than six months. Accordingly, Commerce will make its final determination no later than 135 days after the date of publication of this preliminary determination.
International Trade Commission Notification In accordance with section 733f of the Act, Commerce will notify the International Trade Commission ITC of its preliminary determination. If the final determination is affirmative, the ITC will determine before the later of 120 days after the date of this preliminary determination or 45 days after the final determination whether these imports are materially injuring, or threaten material injury to, the U.S.
industry.
Notification to Interested Parties This determination is issued and published in accordance with sections 733f and 777i1 of the Act and 19
CFR 351.205c.
Dated: January 26, 2020.
Christian Marsh, Acting Assistant Secretary for Enforcement and Compliance.

Appendix IScope of the Investigation The merchandise covered by this investigation is uncoated standard welded steel reinforcement wire mesh wire mesh produced from smooth or deformed wire.
Subject wire mesh is produced in square and rectangular grids of uniformly spaced steel wires that are welded at all intersections.
Sizes are specified by combining the spacing of the wires in inches or millimeters and the wire cross-sectional area in hundredths of square inch or millimeters squared. Subject wire mesh may be packaged and sold in rolls or in sheets.
Subject wire mesh is currently produced to ASTM specification A1064/A1064M, which covers carbon-steel wire and welded wire reinforcement, smooth and deformed, for concrete in the following seven styles:
1. 6 X 6 W1.4/W1.4 or D1.4/D1.4
2. 6 X 6 W2.1/W2.1 or D2.1/D2.1
3. 6 X 6 W2.9/W2.9 or D2.9/D2.9
4. 6 X 6 W4/W4 or D4/D4
5. 6 X 12 W4/W4 or D4/D4
6. 4 X 4 W2.9/W2.9 or D2.9/D2.9
7. 4 X 4 W4/W4 or D4/D4
The first number in the style denotes the nominal spacing between the longitudinal wires and the second number denotes the nominal spacing between the transverse wires. In the first style listed above, for example, 6 X 6 denotes a grid size of six inches by six inches. W denotes the use of smooth wire, and D denotes the use of deformed wire in making the mesh. The number following the W or D denotes the nominal cross-sectional area of the transverse and longitudinal wires in hundredths of a
PO 00000

Frm 00025

Fmt 4703

Sfmt 4703

square inch i.e., W1.4 or D1.4 is .014 square inches.
Smooth wire is wire that has a uniform cross-sectional diameter throughout the length of the wire.
Deformed wire is wire with indentations or raised transverse ribs, which results in wire that does not have a uniform cross-sectional diameter throughout the length of the wire.
Rolls of subject wire mesh are produced in the following styles and nominal width and length combinations:
Style: 6 X 6 W1.4/W1.4 or D1.4/D1.4 i.e., 10
gauge Roll Sizes:
5 X 50
5 X 150
6 X 150
5 X 200
7 X 200
7.5 X 200
Style: 6 X 6 W2.1/W2.1 or D2.1/D2.1 i.e., 8
gauge Roll Sizes:
5 X 150
Style: 6 X 6 W2.9/W2.9 or D2.9/D2.9 i.e., 6
gauge Roll Sizes:
5 X 150
7 X 200
All rolled wire mesh is included in scope regardless of length.
Sheets of subject wire mesh are produced in the following styles and nominal width and length combinations:
Style: 6 X 6 W1.4/W1.4 or D1.4/D1.4 i.e., 10
gauge Sheet Size:
36 X 7
4 X 7
4 X 76
5 X 10
7 X 20
76 X 20
8 X 126
8 X 15
8 X 20
Style: 6 X 6 W2.1/W2.1 or D2.1/D2.1 i.e., 8
gauge Sheet Size: 5 X 10
7 X 20
76 X 20
8 X 126
8 X 15
8 X 20
Style: 6 X 6 W2.9/W2.9 or D2.9/D2.9 i.e., 6
gauge Sheet Size:
36 X 20
5 X 10
7 X 20
76 X 20
8 X 126
8 X 15
8 X 20
Style: 6 X 12 W4/W4 or D4/D4 i.e., 4 gauge Sheet Size: 8 X 20
Style: 4 X 4 W2.9/W2.9 or D2.9/D2.9 i.e., 6
gauge Sheet Size:
5 X 10
7 X 20
76 X 20
8 X 126
8 X 128
8 X 15

E:FRFM01FEN1.SGM

01FEN1