Quiero saber acerca de...

7562

Federal Register / Vol. 86, No. 18 / Friday, January 29, 2021 / Notices
khammond on DSKJM1Z7X2PROD with NOTICES

passenger vehicles used in nominal highway service.

All tires with a P or LT prefix, and all tires with an LT suffix in their sidewall markings are covered by these investigations regardless of their intended use.
In addition, all tires that lack a P or LT prefix or suffix in their sidewall markings, as well as all tires that include any other prefix or suffix in their sidewall markings, are included in the scope, regardless of their intended use, as long as the tire is of a size that fits passenger cars or light trucks. Sizes that fit passenger cars and light trucks include, but are not limited to, the numerical size designations listed in the passenger car section or light truck section of the Tire and Rim Association Year Book, as updated annually. The scope includes all tires that are of a size that fits passenger cars or light trucks, unless the tire falls within one of the specific exclusions set out below.
Passenger vehicle and light truck tires, whether or not attached to wheels or rims, are included in the scope.
However, if a subject tire is imported attached to a wheel or rim, only the tire is covered by the scope.
Specifically excluded from the scope are the following types of tires:
1 Racing car tires; such tires do not bear the symbol DOT on the sidewall and may be marked with ZR in size designation;
2 pneumatic tires, of rubber, that are not new, including recycled and retreaded tires;
3 non-pneumatic tires, such as solid rubber tires;
4 tires designed and marketed exclusively as temporary use spare tires for passenger vehicles which, in addition, exhibit each of the following physical characteristics:
a The size designation and load index combination molded on the tires sidewall are listed in Table PCT1R
T Type Spare Tires for Temporary Use on Passenger Vehicles or PCT1B
T Type Diagonal Bias Spare Tires for Temporary Use on Passenger Vehicles of the Tire and Rim Association Year Book, b the designation T is molded into the tires sidewall as part of the size designation, and, c the tires speed rating is molded on the sidewall, indicating the rated speed in MPH or a letter rating as listed by Tire and Rim Association Year Book, and the rated speed is 81 MPH or a M
rating;
5 tires designed and marketed exclusively as temporary use spare tires for light trucks which, in addition,
VerDate Sep<11>2014

17:43 Jan 28, 2021

Jkt 253001

exhibit each of the following physical characteristics:
a The tires have a 265/70R17, 255/
80R17, 265/70R16, 245/70R17, 245/
75R17, 265/70R18, or 265/70R18 size designation;
b Temporary Use Only or Spare is molded into the tires sidewall;
c the tread depth of the tire is no greater than 6.2 mm; and d Uniform Tire Quality Grade Standards UTQG ratings are not molded into the tires sidewall with the exception of 265/70R17 and 255/80R17
which may have UTGC molded on the tire sidewall;
6 tires designed and marketed exclusively for specialty tire ST use which, in addition, exhibit each of the following conditions:
a The size designation molded on the tires sidewall is listed in the ST
sections of the Tire and Rim Association Year Book, b the designation ST is molded into the tires sidewall as part of the size designation, c the tire incorporates a warning, prominently molded on the sidewall, that the tire is For Trailer Service Only or For Trailer Use Only, d the load index molded on the tires sidewall meets or exceeds those load indexes listed in the Tire and Rim Association Year Book for the relevant ST tire size, and e either i the tires speed rating is molded on the sidewall, indicating the rated speed in MPH or a letter rating as listed by Tire and Rim Association Year Book, and the rated speed does not exceed 81
MPH or an M rating; or ii the tires speed rating molded on the sidewall is 87 MPH or an N rating, and in either case the tires maximum pressure and maximum load limit are molded on the sidewall and either 1 both exceed the maximum pressure and maximum load limit for any tire of the same size designation in either the passenger car or light truck section of the Tire and Rim Association Year Book; or 2 if the maximum cold inflation pressure molded on the tire is less than any cold inflation pressure listed for that size designation in either the passenger car or light truck section of the Tire and Rim Association Year Book, the maximum load limit molded on the tire is higher than the maximum load limit listed at that cold inflation pressure for that size designation in either the passenger car or light truck section of the Tire and Rim Association Year Book;
7 tires designed and marketed exclusively for off-road use and which,
PO 00000

Frm 00037

Fmt 4703

Sfmt 4703

in addition, exhibit each of the following physical characteristics:
a The size designation and load index combination molded on the tires sidewall are listed in the off-the-road, agricultural, industrial or ATV section of the Tire and Rim Association Year Book, b in addition to any size designation markings, the tire incorporates a warning, prominently molded on the sidewall, that the tire is Not For Highway Service or Not for Highway Use, c the tires speed rating is molded on the sidewall, indicating the rated speed in MPH or a letter rating as listed by the Tire and Rim Association Year Book, and the rated speed does not exceed 55
MPH or a G rating, and d the tire features a recognizable offroad tread design;
8 Tires designed and marketed for off-road use as all-terrain-vehicle ATV
tires or utility-terrain-vehicle UTV
tires, and which, in addition, exhibit each of the following characteristics:
a The tires speed rating is molded on the sidewall, indicating the rated speed in MPH or a letter rating as listed by the Tire and Rim Association Year Book, and the rated speed does not exceed 87 MPH or an N rating, and b both of the following physical characteristics are satisfied:
i The size designation and load index combination molded on the tires sidewall does not match any of those listed in the passenger car or light truck sections of the Tire and Rim Association Year Book, and ii The size designation and load index combination molded on the tires sidewall matches any of the following size designation American standard or metric and load index combinations:
American standard size 26x10R12
27x10R14
28x10R14
28x10R14
30x10R14
30x10R15
30x10R14
31x10R14
32x10R14
32x10R15
32x10R15
33x10R15
33x10R15
35x9.50R15
35x10R15

Metric size 254/70R/12
254/65R/14
254/70R/14
254/70R/14
254/80R/14
254/75R/15
254/80R/14
254/85R/14
254/90R/14
254/85R/15
254/85R/15
254/90R/15
254/90R/15
241/105R/15
254/100R/15

Load index 72
73
75
86
79
78
90
81
95
83
94
86
95
82
97

The products covered by this investigation are currently classified under the following Harmonized Tariff Schedule of the United States HTSUS
subheadings: 4011.10.10.10,
E:FRFM29JAN1.SGM

29JAN1